HPE MSM Controller Series: технические характеристики и документация

HPE MSM Controller Series

HP MSM720 Access Controller (WW)

HP MSM760 Premium Mobility Controller/HP MSM760 Access Controller

HP MSM765 zl Premium Mobility Controller

Models

HP MSM720 Access Controller (WW)

J9693A

HP MSM720 Premium Mobility Controller (WW)

J9694A

HP MSM760 Premium Mobility  Controller

J9420A

HP MSM760 Access Controller

J9421A

HP MSM775 zl Premium Controller Module

J9840A

Key features

• Ease of use, scalability, and redundancy
• Enhanced architecture for flexible network design
• Supports IEEE 802.11a/b/g/n and . 11ac APs and access devices
• Comprehensive WLAN security
• Appliance and blade form factors

Product overview

Working in unison with HPE Access Points, the HPE MSM Controller Series delivers a high-performance networking solution. The enhanced controller architecture scales to new WLAN standards without requiring a controller replacement. The MSM controllers provide advanced Radio Resource Management (RRM), including client load balancing and interference mitigation. The MSM wireless controllers also support a fast-roaming capability.

Wireless security is comprehensive with integrated wireless IDS and support for internal and external Authentication, Authorization, and Accounting (AAA) servers; a built-in stateful firewall; per-user VLAN mapping; and authentication.

Features and benefits

Management

• Wi-Fi Clear Connect
  Provides a system-wide approach to delivering WLAN reliability by proactively determining and adjusting to changing RF conditions; optimizes WLAN performance by detecting interference from Wi-Fi and non-Wi-Fi sources—by using spectrum analysis capabilities built into the specific access points (refer to the HPE Access Point—Controller compatibility matrix), identifying rogue activity and making decisions at a system-wide level.
• Advanced radio resource management

- Automatic radio power adjustments
Include real-time power adjustments based on changing environmental conditions and signal coverage adjustment

- Automatic radio channel
Provides intelligent channel switching and real-time interference detection

- Intelligent client load balancing
Determines the number of clients across neighboring APs and adjusts client allocation to balance the load

- Airtime fairness
helps ensure equal RF transmission time for wireless clients

• Spectrum analysis

- Power/frequency spectrum analysis
Measures noise from IEEE 802.11 remote sources

- Signal detection/classification
Identifies source of RF interference; for example, Bluetooth, cordless phones, and microwave ovens

- Evaluation of channel quality
Helps detect severe channel degradation and improves the reporting of poor RF performance

• Automated work flows

- Initial controller settings
Defines basic operational settings for the controller; for example, network connections, security settings, and system time

- Wireless network for employees
Enables setup of a new wireless network for employees; for example, network and security settings, and basic voice and video settings

- Wireless network for guests
Provides wireless access for guest users; for example, network and security settings specific to guest access

• Dashboard Monitoring and Analytics

- Allow administrators to monitor and troubleshoot their HPE WLAN infrastructure at a glance

- Provide analytical visibility into multiple areas such as: Wireless Clients, Access Points and Alarms utilizing intuitive graphics and colors

- Display a quick operational health assessment of the Wi-Fi network and easy identification of potential issues

• Gateway
  Allows discovery of Bonjour services located in a different layer-3 network
• HPE Zerocast
  Eliminates Bonjour multicast traffic from the WLAN enabling scalable deployment of Apple devices with no performance impact on the Wi-Fi network
• Access control
  Enables filters to be applied inbound and outbound (on the AP) to SSIDs, groups of or specific APs. User based filtering can block Bonjour traffic until the user is authenticated
• Remote configuration and management
  Are available through a secure Web browser, command-line interface (console port or SSH), SOAP, or SNMP
• Management interface control
  Allows interfaces to be enabled or disabled depending on security preferences
• Management VLAN
  Segments traffic to and from management interfaces, including CLI, Web browser interface, and SNMP
• RADIUS accounting support
  separates RADIUS accounting server support per SSID; provides detailed session, usage, and billing information for each client activity
• Logging
  provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
• Controller networking
  Includes IEEE 802.1D-compliant bridging and bridge MIB (RFC 4188), which is supported only on a primary bridge interface; stateful firewall; PPPoE client (RFC 2516); ICMP (RFC 792); IEEE 802.1Q VLAN tagging; NAT (RFC 1631); CIDR (RFC 1519); L2TP and PPTP servers for wireless clients; VPN client, which establishes PPTP or IPSec tunnels to other devices; and IGMP snooping (IGMP proxy v1 and v2), which is supported on the wireless interfaces of APs
• DHCP support
  Includes RFC 2131 and RFC 3046 (DHCP relay option 82) for server and built-in DHCP client for client
• Band steering
  Redirects 5 GHz-capable clients automatically to the less-congested 5 GHz spectrum
• Controller management
  Provides a secure Web browser (Secure Sockets Layer [SSL] and VPN), command-line interface, SOAP, SNMP v2c and v3, MIB-II with traps, RADIUS Authentication Client MIB (RFC 2618), and RIPv2 MIB extension (RFC 1724); implements scheduled configuration and firmware upgrades from a central server; offers per-user activity records by time used or data transferred; and supports remote syslog
• HPE Intelligent Management Center (IMC) and Wireless Services Manager Software
  Provide centralized management for discovery, logging, status, and configuration management
• Unified network visibility
  Provides visibility between a wired and wireless network, using the IEEE 802.1AB Link Layer Discovery Protocol (LLDP) and sFlow
• Diagnostics
  Records association, authentication, and DHCP events in client event log; includes a packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format), a wireless client data rate matrix, and a client status page; complete session logging provides detailed information for problem identification and resolution
• Group Bandwidth Management:
  Ability to assign users to groups and control bandwidth by group

Firewall

• Stateful firewall
  enforces firewall policies to control traffic and filter access to network services; maintains session information for every
  connection passing through it, enabling the firewall to control packets based on existing sessions
• NAT/PAT
  Leverages a choice of dynamic partial address translation (PAT) or static network address translation (NAT) preserves a network's IP address pool or conceals the private address of network resources such as Web servers, which are made accessible to users of a guest or public wireless LAN
• Authenticated network access
  Authenticates users with an internal or external RADIUS server or Microsoft® Active Directory before allowing full network connectivity

Quality of Service (QoS)

• Rate limiting
  Supports per-wireless client, ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums
• Centralized traffic
  Layer 2 and Layer 3 QoS settings are maintained when using Mobility Traffic Manager or guest access

Mobility

• HPE MSM solutions enhanced for businesses
  Delivers services for a range of vertical markets, including healthcare, hospitality, education, manufacturing, transportation, and service providers
• Powerful security capabilities
  Enables robust identity- and role-based user account profiles to use internal or external AAA services
• Solutions that cover the most important WLAN applications
  Deliver rich application support, including guest access, location-based services, Voice over Wi-Fi (VoW), hotspot, surveillance, and secure point of sale
• Capacity that scales from small office to large campus
  Deploy wireless LANs (WLANs) efficiently with the MSM720 controller (which supports 10 to 40 APs) and the MSM760, MSM765 zl, and MSM775 zl controllers (which control 40 to 200 APs)
• Premium Mobility scalability features

- Virtual Controller
Managed by a single IP address the MSM76x and MSM775 zl each support a team of up to 800 APs and five controllers and the MSM720 a team of up to 40 APs across two controllers (a team requires the same controller type)

- N+1 redundancy
Teaming provides N+1 redundancy

- Seamless failover
APs can fail-over without rebooting, preserving mobility services when client traffic is bridged locally at the AP

- Up to 64 VSC profiles

• Mobility Traffic Manager
  Provides flexible and multiple network distribution schemes address a range of business needs; policies for user network and security profiles are consistently applied and enforced; wireless traffic can be directed anywhere in the network as required; enterprise businesses can easily migrate to the MSM mobility solution, preserving prior network designs
• Controller client access control
  provides SSL-protected universal access method, MAC address authentication, and IEEE 802.1x authentication; Web proxy server; support for centralized portal; AAA Security; WPA and WPA2 encryption; client-fixed IP address spoofing; per-site and per-user access lists; white list and black list support; bandwidth limiting per user, per VLAN, or per VSC; and concurrent users (up to 250 for the MSM720, up to 2,000 for the MSM760, MSM765 zl and MSM775 zl controller)
• Simplified management with central control
  Reduces the time and complexity of managing a wireless network; the solution controls up to hundreds of APs (depending on the controller) from a single management interface and helps ensure that a consistent set of services is delivered throughout the wireless network; and the controllers push authentication, encryption, QoS enforcement, and access policies to the APs, delivering intelligence to the edge of mobile networks
• Services
  Provides standard L2 roaming and VoWLAN support on all controllers, advanced fast roaming on mobility controllers, plug-and-play AP management, as well as public and guest Internet access
• Advanced fast roaming (requires a mobility controller or upgrade)
  Provides WPA2 opportunistic key caching through controller support as well as inter/intra-subnet roaming and seamless roaming (less than 50 ms roaming delay) support for VoW deployments

Security

• Integrated IDS support (Premium Mobility version required)

- Automated AP and client classification
reduces manual effort (administrator can override AP classification)

- Comprehensive detection capabilities
detects a wide range of attacks

- Flexible event reporting
enables configuration of which events will result in notifications

- Location tracking capabilities
helps identify the location of a rogue device

- Flexible deployment models
supports time slicing or dedicating a radio to detect full time

• Secure shell
  encrypts all transmitted data for secure remote CLI access over IP networks
• Secure Sockets Layer (SSL)
  encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
• IEEE 802.1X, Active Directory, and RADIUS network logins
  Control wireless network access for authentication and accountability, using the IEEE 802.1X, Microsoft Active Directory, and RADIUS
• RADIUS-based MAC authentication
  authenticates a wireless client with a RADIUS server based on the MAC address of the client; this is useful for clients with minimal or no user interface
• Web-based authentication
  Provides a Web browser-based environment to authenticate clients that may not support the IEEE 802.1X supplicant
• IEEE 802.1x supplicant on MSM APs
  Helps prevent deployment of rogue networking equipment
• Secure management access
  Encrypts all access methods (CLI, GUI, or MIB) securely through SSH v2c, SSL, and/or SNMPv3

Policy management

• Standards-based authentication support for Microsoft Active Directory and IEEE 802.1X
  Integrates seamlessly into existing authentication services or uses the built-in database
• Integration with HPE IMC Network Management software
  Helps ensure consistent policy enforcement across wired and wireless networks

Connectivity

• 10GbE connections to the switch fabric
  Leverages two 10GbE wire-speed internal connections to help ensure that the network connections from the application to the switch backplane do not limit application performance (MSM775 zl premium mobility controller only)
• IPv6 wireless client traffic forwarding
  Is supported for L2 and L3 mobility (MTM) and for client traffic directly bridged at the APs
• IEEE 802.3ad link-aggregation control protocol (LACP) and Hewlett Packard Enterprise port trunking
  Support up to six ports bonded via LACP; and facilitates manually configured trunks between an HPE switch and the controller (MSM720 controller only)

Comprehensive portfolio

• Access point support
  Refer to the HPE Access Point —Controller Compatibility Matrix (refer to
  http://h20195.www2.hpe.com/V2/GetDocument.aspx?docname=4AA5-0345ENW&cc=us&lc=en)
  Support for HPE 560 802.11ac access points

Performance

• High-performance processor system

- MSM720 controllers

- Freescale Dual Core 800 MHz P1020 Processor, 256 KB cache, and 1 GB DDR3 memory

- MSM760 controllers
Intel® Core™ 2 Duo Processor E6400, 2.13 GHz, and 2 MB cache

- MSM775 zl controller
Intel® Ivy Bridge Dual Core CPU Core i3-3120ME, 2.4 GHz, and 3 MB cache

• Memory subsystems

- MSM720 controllers
1 GB of DDR3 memory

- MSM760 controllers
2 GB of DDR2 memory

- MSM775 zl controllers
4 GB ECC DDR3-1333 SO-DIMM

• Solid state drive (MSM775 zl model)
  Enables rapid data reads/writes via the 32 GB SATA solid state drive
  (SSD), providing improved application performance

Additional information

• Licensing model for guest user access (v5.7 and later)
  The full number of supported guest access user sessions is enabled with the base-level controller models and is no longer tied to the AP upgrade license; for example, the base MSM720 (access and premium mobility) controllers will now support up to 250 concurrent users and the MSM760 base controllers will now support up to 2,000 concurrent users without requiring additional AP license upgrades
• 10-AP license upgrade option
  This can be used on the MSM720, MSM76x, and MSM775 zl products on all supported firmware releases
• Licensing model for the MSM317 access device (v5.7 and later)
  No additional AP license is required for the MSM317; non-MSM317 devices are subject to AP licensing; maximum wireless device limits per controller and team are unchanged, and all devices count toward these maximums; for example, an MSM760 could manage 200 MSM317 devices with no additional AP license, 40 APs and 160 MSM317 devices with no additional AP license; or 80 APs and 120 MSM317 devices with an additional 40-AP license
• AP support
  Refer to the HPE Access Point—Controller Compatibility Matrix at http://h20195.www2.hpe.com/V2/GetDocument.aspx?docname=4AA5-0345ENW&cc=us&lc=en

Warranty and support

• Limited Lifetime Warranty 2.0—5y HDD
  Limited Lifetime Warranty for the MSM720 and MSM775 zl controllers. See http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
• 1-year Warranty 2.0
  1-year Warranty for the MSM760 controller. See http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.

Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

HP MSM720 Access Controller (WW)

J9693A

• 4 RJ-45 autosensing 10/100/1000 port
• 2 RJ-45 dual-personality 10/100/1000 ports/ SFP Ports

See Configuration NOTE: 1, 2

No Power Cord

J9693A#AC3

• No Localized Power Cord Selected

HP MSM720 Premium Mobility Controller (WW)

J9694A

• 4 RJ-45 autosensing 10/100/1000 port
• 2 RJ-45 dual-personality 10/100/1000 ports/ SFP Ports

See Configuration NOTE: 1, 2

HP MSM760 Premium Mobility  Controller

J9420A

• 2 RJ-45 autosensing 10/100/1000 ports

See Configuration NOTE: 2

HP MSM760 Access Controller

J9421A

• 2 RJ-45 autosensing 10/100/1000 ports

See Configuration NOTE: 2

No Power Cord

J9421A#AC3

• No Localized Power Cord Selected

HP MSM775 zl Premium Controller Module

J9840A

Configuration Rules:

Note 1

The following Transceivers install into this Controller:

HPE X111 100M SFP LC FX Transceiver

J9054C

HPE X121 1G SFP LC LH Transceiver

J4860C

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE X121 1G SFP LC LX Transceiver

J4859C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

Note 2

Localization required. (See Localization Menu)

Internal Power Supplies

None

Transceivers

 SFP Transceivers

HPE X111 100M SFP LC FX Transceiver

J9054C

HPE X121 1G SFP LC LH Transceiver

J4860C

HPE X121 1G SFP LC LX Transceiver

J4859C

HPE X121 1G SFP LC SX Transceiver

J4858C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

Access Point Options

External Power Supplies

HP 1-port Power Injector

J9407B

See Configuration NOTE:1

Configuration Rules:

Note 1

Localization required. (See Localization Menu)

 Licenses

HP MSM Additional 10 Access Point E-LTU

J9697AAE

See Configuration NOTE: 1

HP MSM720 Premium Electronic License to Use

J9698AAE

See Configuration NOTE:2

HP MSM Additional 40 Access Point E-LTU

J9371AAE

See Configuration NOTE:3

HP MSM760 Premium E-LTU

J9491AAE

See Configuration NOTE:5

Configuration Rules

Note 1

This license is supported the following Controllers:

HP MSM720 Premium Mobility Controller (WW)

J9694A

HP MSM760 Premium Mobility  Controller

J9420A

HP MSM775 zl Premium Controller Module

J9840A

HP MSM720 Access Controller (WW)

J9693A

Note 2

This license is supported the following Controllers:

HP MSM720 Access Controller (WW)

J9693A

Note 3

This license is supported the following Controllers:

HP MSM760 Premium Mobility  Controller

J9420A

HP MSM775 zl Premium Controller Module

J9840A

HP MSM760 Access Controller

J9421A

Note 5

This license is supported the following Controllers:

HP MSM760 Access Controller

J9421A

HP MSM720 Premium Mobility Controller (WW) (J9694A)

I/O ports and slots

4 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

2 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

Additional ports and slots

1 RJ-45 serial console port

Physical characteristics

Dimensions

6.28(w) x 10(d) x 1.75(h) in (15.95 x 25.4 x 4.45 cm) (1U height)

Weight

3.62 lb (1.64 kg)

Mounting

Supports the mounting options of the 2520-8 PoE switch, including EIA-standard 19 in. telco rack or equipment cabinet (rack-mounting kit included); horizontal surface or wall mounting

Performance

100 Mb Latency

< 20.4 µs (LIFO 64-byte packets)

1000 Mb Latency

< 6.3 µs (LIFO 64-byte packets)

Throughput

up to 8.9 million pps

Environment

Operating temperature

41°F to 113°F (5°C to 45°C)

Operating relative humidity

15% to 95% @ 104°F (40°C)

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

15% to 95% @ 149°F (65°C)

Electrical characteristics

Frequency

50/60 Hz

Maximum heat dissipation

70 BTU/hr (73.85 kJ/hr)

AC Voltage

100-240 VAC

Current

.2/.1 A

Maximum power rating

20 W

Safety

UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Emissions

FCC part 15 Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003

Features

Supported

• IEEE 802.11 a/b/g/n and .11ac access points and devices
• 10 to 40 access points and/or access devices (in increments of 10)
• IEEE 802.3ad Link Aggregation Control Protocol (LACP)
• 250 simultaneous guest access users

Included services

• Plug-and-play AP management and WLAN management
• Guest access
• Captive portal
• PCI DSS compliance for wireless PoS traffic
• Support for Real-Time Location Services (RTLS)
• Advanced fast roaming with VoWLAN support
• Mobility Traffic Manager (MTM)
• Support for up to 64 VSC profiles
• Unified policy enforcement and network visibility
• Virtual controller (up to two MSM720 controllers and 40 APs with resiliency; 250 maximum concurrent users)

Notes

Latency values refer to client traffic bridged locally at the AP.
Not all services are supported with the Virtual Controller feature. Please refer to the user documentation for more detail.
For U.S. government manufactured sales requirements, order the TAA MSM720 controller models. For all other AMS and WW orders, use WW models.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP MSM720 Access Controller (WW) (J9693A)

I/O ports and slots

4 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Additional ports and slots

1 RJ-45 serial console port

Physical characteristics

Dimensions

6.28(w) x 10(d) x 1.75(h) in (15.95 x 25.4 x 4.45 cm) (1U height)

Weight

3.62 lb (1.64 kg)

Mounting

Supports the mounting options of the 2520-8 PoE switch, including EIA-standard 19 in. telco rack or
equipment cabinet (rack-mounting kit included); horizontal surface or wall mounting

Performance

100 Mb Latency

< 20.4 µs (LIFO 64-byte packets)

1000 Mb Latency

< 6.3 µs (LIFO 64-byte packets)

Throughput

up to 8.9 million pps

Environment

Operating temperature

41°F to 113°F (5°C to 45°C)

Operating relative humidity

15% to 95% @ 104°F (40°C)

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

15% to 95% @ 149°F (65°C)

Electrical characteristics

Frequency

50/60 Hz

Maximum heat dissipation

70 BTU/hr (73.85 kJ/hr)

AC Voltage

100-240 VAC

Current

.2/.1 A

Maximum power rating

20 W

Safety

UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Emissions

UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Features

Supported

• IEEE 802.11 a/b/g/n and 802.11ac access points and devices
• 10 to 40 access points and/or access devices (in increments of 10)
• IEEE 802.3ad Link Aggregation Control Protocol (LACP)
• 250 simultaneous guest access users

Included services

• Plug-and-play AP management and WLAN management
• Guest access
• Captive portal
• PCI DSS compliance for wireless PoS traffic
• Support for Real-Time Location Services (RTLS)
• Standard Layer 2 roaming with VoWLAN support
• Support for up to 16 VSC profiles
• Unified policy enforcement and network visibility

Notes

Latency values refer to client traffic bridged locally at the AP.
For U.S. government manufactured sales requirements, order the TAA MSM720 controller models. For all other AMS and WW orders, use WW models.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP MSM760 Premium Mobility  Controller (J9420A)

I/O ports and slots

2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Additional ports and slots

1 RJ-45 serial console port

Physical characteristics

Dimensions

17.32(w) x 15.38(d) x 1.75(h) in (43.99 x 39.07 x 4.45 cm) (1U height)

Weight

13.45 lb (6.1 kg)

Mounting

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface
mounting only

Environment

Operating temperature

41°F to 104°F (5°C to 40°C)

Operating relative humidity

15% to 80%, noncondensing

Nonoperating/Storage temperature

-40°F to 149°F (-40°C to 65°C)

Nonoperating/Storage relative humidity

15% to 80%, noncondensing

Electrical characteristics

Frequency

50/60 Hz

Maximum heat dissipation

434 BTU/hr (457.87 kJ/hr)

AC Voltage

100-240 VAC

Current

2/1 A

Maximum power rating

127 W

Safety

UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Emissions

FCC part 15 Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003

Features

Supported

• IEEE 802.11 a/b/g/n and .11ac access points and devices
• 40 to 200 access points and/or access devices (in increments of 10 or 40)
• MSM firmware releases prior to MSM v5.7: 1,000 simultaneous guest access users upgradable in increments of 250 per 40-AP license pack, up to a maximum of 2,000 guest access users Unlimited simultaneous users
• MSM v5.7 and later: 2,000 simultaneous guest access users with base product

Included services

• Plug-and-play AP management and WLAN management
• Guest access
• Captive portal
• PCI DSS compliance for wireless PoS traffic
• Support for Real-Time Location Services (RTLS)
• Advanced fast roaming with VoWLAN support
• Mobility Traffic Manager (MTM)
• Support for up to 64 VSC profiles
• Unified policy enforcement and network visibility
• Virtual controller (up to five MSM760 Premium Mobility controllers and 800 APs with resiliency)

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP MSM760 Access Controller (J9421A)

I/O ports and slots

2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Additional ports and slots

1 RJ-45 serial console port

Physical characteristics

Dimensions

17.32(w) x 15.38(d) x 1.75(h) in (43.99 x 39.07 x 4.45 cm) (1U height)

Weight

13.45 lb (6.1 kg)

Mounting and enclosure

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only

Environment

Operating temperature

41°F to 104°F (5°C to 40°C)

Operating relative humidity

15% to 80%, noncondensing

Nonoperating/Storage temperature

-40°F to 149°F (-40°C to 65°C)

Nonoperating/Storage relative humidity

15% to 80%, noncondensing

Electrical characteristics

Frequency

50/60 Hz

Maximum heat dissipation

434 BTU/hr (457.87 kJ/hr)

Voltage

100-240 VAC

Current

2/1 A

Maximum power rating

127 W

Safety

UL 60950-1; CAN/CSA 22.2 No. 60950-1; IEC 60950-1; EN 60950-1

Emissions

FCC part 15 Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003

Features

Supported

• IEEE 802.11a/b/g/n and .11ac access points and devices
• 40 to 200 access points and/or access devices (in increments of 10 or 40)
• MSM firmware releases prior to MSM v5.7: 1,000 simultaneous guest access users upgradable in increments of 250 per 40-AP license pack, up to a maximum of 2,000 guest access users
• MSM v5.7 and later: 2,000 simultaneous guest access users with base product
• Maximum of 2,000 concurrent users are supported

Included services

• Plug-and-play AP management and WLAN management
• Guest access
• Captive portal
• PCI DSS compliance for wireless PoS traffic
• Support for Real-Time Location Services (RTLS)
• Standard Layer 2 roaming with VoWLAN support
• Support for up to 16 VSC profiles
• Unified policy enforcement and network visibility

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP MSM775 zl Premium Controller Module (J9840A)

Physical characteristics

Dimensions

8.13(w) x 9.75(d) x 1.75(h) in (20.65 x 24.77 x 4.45 cm)

Weight

2.65 lb (1.2 kg)

Mounting and enclosure

Can be installed in any of the following chassis: HP5406R zl2 (J9821A), HP5412R zl2 (J9822A), HP 5406 zl (J8697A), 5412 zl (J8698A), HP 8206 zl (J9640A),and 8212 zl (J8715A).

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

15% to 95% @ 104°F (40°C), noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

15% to 90% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Notes

Non-operating/Storage Altitude up to 15,000 ft (4.6 km) The SSD has a maximum operational wet bulb temperature of 35°C (95°F) and a maximum
non-operational wet bulb temperature of 40°C (104°F)

Electrical characteristics

Maximum heat dissipation

188 BTU/hr (198.34 kJ/hr)

Maximum power rating

55 W

Idle power

30 W

Safety

UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Emissions

FCC part 15 Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003

Features

Included services:

• Plug-and-play AP management and WLAN management
• Guest access (up to 2000 concurrent guest access user sessions are supported)
• Captive portal
• PCI DSS compliance for wireless PoS traffic
• Support for Real-Time Location Services (RTLS)
• Advanced fast roaming with VoWLAN support
• Mobility Traffic Manager (MTM)
• Support for up to 64 VSC profiles
• Unified policy enforcement and network visibility
• Virtual controller (up to five MSM775 zl controllers and 800 APs with resiliency)
• The MSM775 zl module has a 2000 concurrent user limit. When controllers are teamed the limit remains 2000 concurrent users regardless of the number of controllers in the team.

The MSM775 zl module provides a module reset switch on the front panel. Refer to the user documentation for more detail.

The MSM775 zl module has a USB port on the front panel. Use of this port is not supported.

Notes

• Not all services are supported with the Virtual Controller feature. Please refer to the user documentation for more detail.
• MSM775 zl modules can only be teamed with other MSM775 zl modules.
• Chassis Configuration Guidelines:
  • Up to six MSM775 modules can be installed in an HP 5406 zl, HP 5412 zl, HP 8206 zl or HP 8212 zl, chassis if no other service modules are installed.
  • Note that the maximum number of service modules in a chassis is 6. So if other service modules are installed in the same chassis, the total number of MSM775 zl modules than can be inserted in a chassis is reduced such that the total number of all service modules in a chassis does not exceed 6.
  • There are no restrictions on what slots the MSM775 zl modules are inserted into.
  • Maximum chassis operating temperature specifications of the HP 5400 zl chassis when the MSM775 zl module is installed is 45°C. Note that the maximum temperature of the chassis is determined by the module with the lowest operating temperature.
  • The maximum HP 8200 zl chassis operating temperature specification (45°C) does not change when a MSM775 zl module is installed.
  • Note that installation of the MSM775 does not increase or decrease documented chassis limits for other service modules.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

Standards and protocols

(applies to all products in series)

Device management
RFC 1155 Structure and Mgmt Information (SMIv1)
RFC 1157 SNMPv1/v2c
RFC 1305 NTPv3
RFC 1591 DNS (client)
RFC 1901 (Community based SNMPv2)
RFC 2030 SNTP
RFC 2578-2580 SMIv2
RFC 2580 (SMIv2 Conformance)
RFC 2616 HTTP
RFC 3410 (Management Framework)
RFC 3416 (SNMP Protocol Operations v2)
RFC 3417 (SNMP Transport Mappings)

General protocols
IEEE 802.11i Wireless Security
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1X PAE
IEEE 802.3ab 1000BASE-T Gigabit Ethernet over twisted pair (10/100/1000 models only)
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 1122 Host Requirements
RFC 1213 Management Information Base for Network Management of TCP/IP-based internets
RFC 1305 NTPv3 (IPv4 only)
RFC 1519 CIDR
RFC 1542 BOOTP
RFC 2131 DHCP
RFC 3176 sFlow
RFC 4446 IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3)

MIBs
RFC 1156 (TCP/IP MIB)
RFC 1157 A Simple Network Management Protocol (SNMP)
RFC 1212 Concise MIB Definitions
RFC 1213 MIB II
RFC 2578 Structure of Management Information Version 2 (SMIv2)
RFC 2863 The Interfaces Group MIB

Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1D (STP)
RFC 1155 Structure of Management Information
RFC 1157 SNMPv1
RFC 1212 Concise MIB definitions
RFC 1215 Convention for defining traps for use with the SNMP
RFC 1901 SNMPv2 Introduction
RFC 2578 SMIv2
RFC 2578 Structure of Management Information Version 2 (SMIv2)
RFC 2580 Conformance Statements for SMIv2
RFC 3164 BSD syslog Protocol
RFC 3410 Introduction to Version 3 of the Internet-standard Network Management Framework
RFC 3411 SNMP Management Frameworks
RFC 3412 SNMPv3 Message Processing
RFC 3413 Simple Network Management Protocol (SNMP) Applications
RFC 3414 SNMPv3 User-based Security Model (USM)
RFC 3415 SNMPv3 View-based Access Control Model VACM)
RFC 3418 Management Information Base (MIB) for the Simple Network Management Protocol (SNMP)
RFC 3584 Coexistence between Version 1 and Version 2 of the Internet-standard Network
SNMPv1/v2c/v3

Security
RFC 1321 The MD5 Message-Digest Algorithm
RFC 1851 ESP Triple DES Transform
RFC 2104 Keyed-Hashing for Message Authentication
RFC 2246 Transport Layer Security (TLS)
RFC 2401 Security Architecture for the Internet Protocol
RFC 2408 Internet Security Association and Key Management Protocol (ISAKMP)
RFC 2409 The Internet Key Exchange (IKE)
RFC 2548 Microsoft Vendor-specific RADIUS Attributes
RFC 2716 PPP EAP TLS Authentication Protocol
RFC 2865 RADIUS Authentication
RFC 2866 RADIUS Accounting
RFC 3579 RADIUS Support For Extensible Authentication Protocol (EAP)
RFC 3580 IEEE 802.1X RADIUS Guidelines
RFC 3686 Using AES Counter Mode with IPsec ESP
AES: CCM, CCMP
SSL and TLS: RC4 128-bit and RSA 1024- and 2048-bit
Web Authentication
WPA (Wi-Fi Protected Access)
WPA (Wi-Fi Protected Access)/WPA2

IPSec
RFC 2403 The Use of HMAC-MD5-96 within ESP and AH
RFC 2404 The Use of HMAC-SHA-1-96 within ESP and AH
RFC 2406 IP Encapsulating Security Payload
RFC 2407 - Domain of interpretation
RFC 2451 The ESP CBC-Mode Cipher Algorithms
RFC 3602 The AES-CBC Cipher Algorithm and Its Use with IPSec

IKEv1
RFC 2407 The Internet IP Security Domain of Interpretation for ISAKMP
RFC 2408 Internet Security Association and Key Management Protocol (ISAKMP).
RFC 2409 The Internet Key Exchange (IKE)
RFC 2865 - Remote Authentication Dial In User Service (RADIUS)
RFC 3748 - Extensible Authentication Protocol (EAP)

PKI
RFC 3280 Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile

HP MSM Controller Series accessories

HP MSM720 Premium Mobility Controller
(WW) (J9694A)

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP MSM Additional 10 Access Point E-LTU

J9697AAE

HP MSM720 Access Controller (WW)
(J9693A)

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP MSM Additional 10 Access Point E-LTU

J9697AAE

HP MSM720 Premium Electronic License to Use

J9698AAE

HP MSM760 Premium Mobility Controller
(J9420A)

HP MSM Additional 40 Access Point E-LTU

J9371AAE

HP MSM Additional 10 Access Point E-LTU

J9697AAE

HP MSM760 Access Controller (J9421A)

HP MSM Additional 10 Access Point E-LTU

J9697AAE

HP MSM Additional 40 Access Point E-LTU

J9371AAE

HP MSM760 Premium E-LTU

J9491AAE

HP MSM775 zl Premium Controller Module (J9840A)

HP MSM Additional 10 Access Point E-LTU

J9697AAE

HP MSM Additional 40 Access Point E-LTU

J9371AAE

HPE X121 1G SFP LC SX Transceiver (J4858C)

A small form-factor pluggable (SFP) Gigabit SX
transceiver that provides a full-duplex Gigabit solution
up to 550 m on multimode fiber.

Ports

1 LC 1000BASE-SX port; Duplex: full only

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)

Operating relative humidity: 5% to 85%, noncondensing

Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)

Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.4 W

Power consumption maximum: 0.7 W

Cabling

Type:

• 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;

Maximum distance:

• 2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
• 2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
• 2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
• 2-550 m (50 µm core diameter, 500 MHz*km bandwidth)

Cable length: 2-550m

Fiber type: Multi Mode

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE X121 1G SFP LC LX Transceiver (J4859C)

HP X121 1G SFP LC LX Transceiver: An SFP format
gigabit transceiver with LC connectors using LX
technology.

Ports

1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full only

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)

Operating relative humidity: 0% to 85%, noncondensing

Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)

Altitude: up to 10,000 ft. (3 km)

Cabling

Type:

• Either single mode or multimode; 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively; Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1;

Maximum distance:

• 2-550 m (multimode 62.5 µm core diameter, 500 MHz*km bandwidth)
• 2-550 m (multimode 50 µm core diameter, 400 MHz*km bandwidth)
• 2-550 m (multimode 50 µm core diameter, 500 MHz*km bandwidth)
• 2-10,000 m (single-mode fiber)

Notes

A mode conditioning patch cord may be needed in some multimode fiber installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE X121 1G SFP LC LH Transceiver (J4860C)

A small form-factor pluggable (SFP) Gigabit LH transceiver that provides a full-duplex Gigabit solution up to 70 km on single-mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics); Duplex: full only

Physical characteristics

Dimensions: 2.17(d) x 0.60(w) x 0.46(h) in. (5.5 x 1.53 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: -40°F to 185°F (-40°C to 85°C)

Operating relative humidity: 0% to 95% @ 77°F (25°C), noncondensing

Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:

• Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1;

Maximum distance:

• 10-70,000 m (single-mode fiber)

Notes

Power consumption is 0.8 watts typical with 1 watt maximum at 100% utilization.
For distances less than 20 km, a 10 dB attenuator must be used.
For distances between 20 km and 40 km, a 5 dB attenuator must be used.
Attenuators can be purchased from most cable vendors.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE X111 100M SFP LC FX Transceiver (J9054C)

Ports

1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half or full

Physical characteristics

Dimensions

2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)

Weight

0.06 lb. (0.03 kg)

Environment

Operating temperature

32°F to 158°F (0°C to 70°C)

Operating relative humidity

5% to 95%

Nonoperating/Storage temperature

-40°F to 185°F (-40°C to 85°C)

Nonoperating/Storage relative humidity

5% to 85%

Altitude

up to 10,000 ft. (3 km)

Cabling

Cable type:
62.5/125 ìm or 50/125 ìm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:
2 km (full duplex) or 412 m (half duplex)

Notes

Transmitter wavelength: 1310nm
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J9054C 100-FX SFP-LC Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP X112 100M SFP LC BX-D Transceiver (J9099B)

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "downstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber. The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE-standard 100BASE-BX10-U ("upstream") device.

Ports

1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D); Duplex: full only

Physical characteristics

Dimensions

2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22 cm)

Weight

0.04 lb. (0.03 kg)

Environment

Operating temperature

32ºF to 158ºF (0ºC to 70ºC)

Operating relative humidity

0% to 95%, noncondensing

Nonoperating/Storage temperature

-40ºF to 185ºF (-40ºC to 85ºC)

Cabling

Type:

Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

• 0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1550 nm. Receive wavelength: 1310 nm.
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP BX Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE-standard 100BASE-BX10-U ("upstream") device. (A 100-BX-D transceiver can only connect to a 100-BX-U product. You cannot connect two 100-BX-D transceivers together.)

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP X112 100M SFP LC BX-U Transceiver (J9100B)

A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "upstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber. The J9100B connects to the J9099B "downstream" transceiver, or to any IEEE-standard 100BASE-BX10-D ("downstream")
device.

Ports

1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U); Duplex: full only

Physical characteristics

Dimensions

2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22 cm)

Weight

0.07 lb. (.03 kg)

Environment

Operating temperature

32ºF to 158ºF (0ºC to 70ºC)

Operating relative humidity

0% to 95%, noncondensing

Nonoperating/Storage temperature

-40ºF to 185ºF (-40ºC to 85ºC)

Cabling

Type:

Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

• 0.5-10,000 m (single-mode fiber)

Notes

For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP BX Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9100B connects to the J9099B "downstream" transceiver, or to any IEEE-standard 100BASE-BX10- D ("downstream") device. (A 100-BX-U transceiver can only connect to a 100-BX-D product. You cannot connect two 100-BX-U transceivers together.)
Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.
Power consumption is 1.1 watts maximum.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP X122 1G SFP LC BX-D Transceiver (J9142B)

A small form-factor pluggable (SFP) Gigabit-BX (bi-directional) "downstream" transceiver that provides a full-duplex Gigabit solution up to 10 km on one strand of single-mode fiber. The J9142B connects to the J9143B "upstream" transceiver, or to any IEEE-standard 1000BASE-BX10-U ("upstream") device.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D); Duplex: full only

Physical characteristics

Dimensions

2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18 cm)

Weight

0.04 lb. (0.02 kg)

Environment

Operating temperature

32ºF to 158ºF (0ºC to 70ºC)

Operating relative humidity

0% to 95%, non-condensing

Non-operating/
Storage temperature

–40ºF to 185ºF –40ºC to 85ºC)

Cabling

Type:
Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

• 0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1490 nm. Receive wavelength: 1310 nm.
Power consumption is 1 watt maximum.
For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP BX Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9142B connects to the J9143B "upstream" transceiver, or to any IEEE-standard 1000BASE-BX10-U ("upstream") device. (A 1000-BX-D transceiver can only connect to a 1000-BX-U product. You cannot connect two 1000-BX-D transceivers together.)

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP X122 1G SFP LC BX-U Transceiver (J9143B)

A small form-factor pluggable (SFP) Gigabit-BX (bi-directional) "upstream" transceiver that provides a full-duplex Gigabit solution up to 10 km on one strand of single-mode fiber. The J9143B connects to the J9142B "downstream" transceiver, or to any IEEE-standard 1000BASE-BX10-D ("downstream")
device.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U); Duplex: full only

Physical characteristics

Dimensions

2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18 cm)

Weight

0.04 lb. (0.02 kg)

Environment

Operating temperature

32ºF to 158ºF (0ºC to 70ºC)

Operating relative humidity

0% to 95%, non-condensing

Non-operating/
Storage temperature

–40ºF to 185ºF –40ºC to 85ºC)

Cabling

Type:
Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

• 0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1310 nm. Receive wavelength: 1490 nm.
For supported platforms and minimum software requirements to support this product, see the document titled "Support for the HP BX Transceivers" on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9143B connects to the J9142B "downstream" transceiver, or to any IEEE-standard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U transceiver can only connect to a 1000-BX-D product. You cannot connect two 1000-BX-U transceivers together.)
Power consumption is 1 watt maximum.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP 1-port Power Injector (J9407B)

Physical characteristics

Dimensions

5.71(d) x 2.36(w) x 1.22(h) in. (14.5 x 6 x 3.1 cm)

Weight

1 lb. (0.45 kg)

Environment

Operating temperature

32°F to 104°F (0°C to 40°C)

Operating relative humidity

5% to 93%, noncondensing

Nonoperating/Storage temperature

-4°F to 158°F (-20°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Altitude

up to 10,000 ft. (3 km)

Electrical characteristics

Voltage

100-240 VAC

Current

0.3/0.2 A

Frequency

50/60 Hz

Notes

IEEE 802.3af compliant

Safety

UL 60950; EN 60950

Emissions

EN 55024; EN 55022 (CISPR 22) Class B with FTP Cabling; FCC Part 15, Class B with FTP cabling

Notes

The 1-port power converter has 1 AC power cord input, 1 RJ-45 10/100/1000 Mbps port for data coming from the network infrastructure, and 1 RJ-45 for data plus IEEE 802.3af-compliant PoE for Gigabit Ethernet to power the access point.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE X121 1G SFP RJ45 T Transceiver (J8177C)

HP X121 1G SFP RJ45 T Transceiver: An SFP format gigabit transceiver with RJ45 connectors using 1000BaseT technology.

Ports

1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex: full only

Physical characteristics

Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM airflow over the SFP module)

Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing

Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C), noncondensing

Altitude: up to 10,000 ft. (3000 km)

Cabling

Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
100 m

Notes

Power consumption is nominally 1 watt.
For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J8177C 1000Base-T Mini-GBIC" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.
The J8177C Gigabit copper mini-GBIC is not supported on dual-personality ports.
The J8177C is capable of 100 Mb operation. This is supported on only the HPE ProCurve Switch 8200zl, 5400zl, and 6200yl Series using software version K.12.21 or later. Use the "auto-100" port setting to enable 100 Mb operation.
Important: The earlier J8177B does not support 100 Mb operation.
When used in the ProCurve Switch gl 20-Port 10/100/1000 Module (J4908A), the J8177C mini-GBIC can be installed in either the upper or lower mini-GBIC port, but will block access to the other port.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

Date

Version History

Action

Description of Change

01-Aug-2016

From Version 23 to 24

Changed

Adding #AC3 Option on Configuration section

22-Jan-2016

From Version 22 to 23

Changed

Edits made on Overview and Technical Specifications

01-Dec-2015

From Version 21 to 22

Changed

Overview and Technical Specifications updated

01-Dec-2014

From Version 20 to 21

Changed

Content QS edits, feature updates and warranty changes

Removed

Removed MSM765zl, removed TAA sku options, added .11ac AP support, removed paper licenses, updated E-licenses, removed MSM710 mounting kit

23-May-2014

From Version 19 to 20

Changed

Content QS edits

20-Dec-2013

From Version 16 to 17

Changed

External Power Supplies were revised.

09-Dec-2013

From Version 15 to 16

Changed

Updates made to the Configuration section.

22-Apr-2013

From Version 14 to 15

 Added

 Overview: Added Images

25-Mar-2013

From Version 13 to 14

 Added

 Overview: Added Build to Order section to the Featrues and benefits section.

Removed

Overview: Removed entire Models section.

22-Dec-2011

From Version 12 to 13

Changed

Updated the warranty statements in Features and Benefits.

16-Nov-2011

From Version 10 to 12

Changed

The QuickSpecs was rewritten, including changing the title.

18-Jul-2011

From Version 9 to 10

Changed

Accessories were revised.

08-Oct-2010

From Version 8 to 9

Changed

The QuickSpecs was rewritten, including changing the title.

02-Jun-2010

From Version 7 to 8

Changed

Updated the Introduction and Key Features.

25-Mar-2010

From Version 6 to 7

Changed

Updated the Introduction and Key Features.

10-Jan-2010

From Version 5 to 6

Changed

Updated the Introduction, Key Features, and Features and Benefits sections.

21-Oct-2009

From Version 3 to 4

Changed

Updated the Introduction and Key Features sections.

10-Aug-2009

From Version 2 to 3

Removed

Removed several models throughout the document.

01-Jun-2009

From Version 1 to 2

Added

Added several new modules throughout the document.