Сегодня покупают
← Вернуться назад
Нужна помощь с конфигурацией?
Пришлите SKU, спецификацию или список требований. Специалист Apltech проверит совместимость компонентов и найдёт актуальные артикулы
Получить консультацию →

HPE MSM-802.11n Dual Radio Access Point Series: технические характеристики и документация

В архиве
HPE MSM-802.11n Dual Radio Access Point Series

Overview

HPE MSM-802.11n Dual Radio Access Point Series

 

Key features

  • First three-spatial stream MIMO AP in the industry
  • Up to 450 Mb/s per radio on MSM460 and MSM466/MSM466-R APs
  • Support for a range of indoor and outdoor antennas for the MSM466 and outdoor MSM466-R APs
  • Comprehensive WLAN security
  • Indoor APs include Limited Lifetime Warranty

 

Product overview

Working in unison with HPE controllers, the HPE 802.11n Dual Radio Access Point Series delivers high-performance networking solutions. The enhanced controller architecture scales to IEEE 802.11n without requiring a controller replacement. The controller provides advanced radio resource management (RRM), including client load balancing and interference mitigation. The HPE wireless controllers support a fast-roaming capability—an important feature, especially for VoIP communications.

The APs can be used in managed as well as autonomous mode without a controller. The access points provide RF spectrum analysis with detection and classification of non-IEEE 802.11 interference; and they have the ability to automatically avoid interference. Wireless security is comprehensive with integrated Wireless IDS and support for internal and external authentication, authorization, and accounting (AAA) servers; built-in stateful firewall; per-user VLAN mapping; and authentication.

In addition to working with the HPE MSM controllers, these access points work with the HPE 10500/7500 20G Unified Wired-WLAN Module, the HPE 800 Series Unified Wired-WLAN Controllers and Switches, and the HPE WX5002/5004 wireless controllers.


 

Features and benefits

Management

  • Wi-Fi Clear Connect
    Provides a system-wide approach to delivering WLAN reliability by proactively determining and adjusting to changing RF conditions; helps optimize WLAN performance by detecting interference from Wi-Fi and non-Wi-Fi sources—by using spectrum analysis capabilities built into the access points, identifying rogue activity and making decisions at a system-wide level
  • Advanced radio resource management
    • Automatic radio power adjustments
      include real-time power adjustments based on changing environmental conditions and signal coverage adjustment
    • Automatic radio channel
      Provides intelligent channel switching and real-time interference detection
    • Intelligent client load balancing
      Determines the number of clients across neighboring APs and adjusts client allocation to balance the load
    • Airtime fairness
      Provides equal RF transmission time for wireless clients
  • Spectrum analysis
    • Power/frequency spectrum analysis
      Measures noise from IEEE 802.11 remote sources
    • Signal detection/classification
      Identifies source of RF interference, for example, Bluetooth, cordless phones, and microwave ovens
    • Evaluation of channel quality
      Helps detect severe channel degradation and improve the reporting of poor RF performance
  • Integrated IDS (Premium Mobility version required)
    Detects and locates unknown and rogue devices (refer to the controller data sheet for details)
  • Access point management
    Provides a secure Web browser (SSL and VPN), command-line interface SNMP v2c, SNMP v3, MIB-II with traps, and RADIUS authentication client MIB (RFC 2618); offers an embedded HTML management tool with secure access (SSL and VPN); and implements scheduled configuration and firmware upgrades from a central controller
  • HPE Intelligent Management Center and Wireless Services Manager Software
    Provide centralized management for discovery, logging, status, and configuration management
  • Diagnostics
    Records association, authentication, and DHCP events in client event log; and includes a packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format) as well as a data rate matrix
  • Enhanced AP survivability
    Continues to operate using the old IP address, while the AP searches for a new controller
  • Compatible with HPE WLAN Controllers, HPE Unified Switches and Modules
    • Refer to the HPE Access Point—Controller Compatibility Matrix at
      http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA5-0345ENW&cc=us&lc=en
    • Refer to the release notes for minimum version numbers required.

Quality of Service (QoS)

  • Rate limiting
    Supports per-wireless client, ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums
  • Centralized traffic
    Maintains L2 and L3 QoS settings when using centralized traffic or guest access
  • IEEE 802.1p prioritization
    delivers data to devices based on the priority and type of traffic
  • Wireless
    • L2/L3/L4 classification
      Supports IEEE 802.1p VLAN priority, SpectraLink SVP, and DiffServ
    • Virtual Service Community (VSC)
      Assigns Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and service-aware priority
    • VoIP call capacity
      Supports 12 active calls per radio, maximum
  • Microsoft Lync Server 2010 and 2013 Qualified
    Qualified in the Microsoft Lync Server Wi-Fi interoperability program to ensures that products comply with Microsoft's guidelines for voice and video quality of service (QoS) delivery
  • SpectraLink Voice Priority (SVP) support
    prioritizes SpectraLink voice IP packets sent from a SpectraLink NetLink SVP server to SpectraLink wireless voice handsets to help ensure excellent voice quality

Connectivity

  • IEEE 802.3af Power over Ethernet (PoE) support
    simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
  • Auto-MDIX
    Adjusts automatically for straight-through or crossover cables on the Ethernet interface

Mobility

  • Three spatial-stream MIMO technology
    Provides the latest in Wi-Fi technology, which allows for 450 Mb/s of signaling per radio; and delivers potentially more than a 50 percent increase in performance over any two spatial stream products
  • Beam forming
    Provides better coverage area and better performance at distances from the AP
  • Band steering
    Redirects 5 GHz-capable clients automatically to the less-congested 5 GHz spectrum
  • Concurrent operation in the 5 GHz band
    Provides the capability to run both radios in the 5 GHz band for outstanding performance (MSM466 and MSM466-R access points only)
  • MSM430 and MSM460 AP antennas
    Provide excellent coverage through use of embedded high-gain antennas (5 dBi antenna at 2.4 GHz and 7 dBi antenna at 5 GHz); no need for the added cost of external antennas
  • MSM466 and MSM466-R access points
    • External antenna options
      MSM466 access point includes six indoor RP-SMA connectors; MSM466-R access point includes six outdoor standard N connectors
    • Two indoor ceiling mount antennas
      Provide good coverage when embedded antennas are not an option
    • Outdoor IP67-rated antennas
      Enhances point-to-point, multipoint, mesh, and outdoor coverage; two omni-directional and two directional MIMO antennas are weatherproof IP67 tested
  • Anywhere, anytime wireless coverage
    Enhances point-to-point, multipoint, mesh, and outdoor coverage; two omni-directional and two directional MIMO antennas are weatherproof IP67 tested
  • Medical standards
    Meets the European EN60601-1-2 standard for healthcare
  • Virtual Service Communities (VSCs)
    Includes up to 16 SSIDs, each with a unique MAC address and configurable SSID broadcasts; individual security and QoS profiles per VSC; configurable DTIM and a minimum data rate per VSC; VSCs that can be mapped to separate IEEE 802.1Q VLANs; WMM and/or WMM-PS; a security filter; and an IP filter
  • AP client access control functions
    • offers IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP
    • delivers MAC address authentication using local or RADIUS access lists
    • provides RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2
    • supports RADIUS Client (RFC 2865 and 2866) with location-aware support
    • provides Layer 2 wireless client isolation

Security

  • Integrated IDS support
    • Automated AP and client classification
      reduces manual effort (administrator can override AP classification)
    • Comprehensive detection capabilities
      detects a wide range of attacks
    • Flexible event reporting
      enables configuration of which events will result in notifications
    • Location tracking capabilities
      helps identify the rogue device location
    • Flexible deployment models
      Supports time slicing or dedicating a radio to detect full time
    • Refer to the controller data sheet for more
  • IEEE 802.1X support
    provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5, TLS, TTLS, and PEAP with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic between authenticated clients and the access point
  • Choice of IEEE 802.11i, WPA2, or WPA
    locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic
  • TKIP/WEP encryption
    is supported only on legacy IEEE 802.11a/b/g clients as it has been deprecated from the IEEE 802.11n standard
  • Local wireless bridge client traffic filtering
    prevents communication between wireless devices associated with
    the same access point

Additional information

  • RFC support
    refer to the "Mobility Specification Sheet" for a list of RFCs and other industry standards supported by the MSM solution at
    http://h17007.www1.hp.com/docs/mobility/4AA3-3883ENW.pdf
  • TAA-compliant versions available
    For U.S.-government manufactured sales requirements, order the TAA variant of the MSM430, MSM460, and MSM466 access point(all MSM466-R units are TAA approved)

Warranty and support

  • Limited Lifetime Warranty
    See http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
  • 1-year Warranty
    See http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase
  • Software releases
    to find software for your product, refer to http://www.hpe.com/networking/support ; for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary    

Configuration

 

Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

 

 

 

HP 425 Wireless 802.11n (AM) AP

JG653A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

HP 425 Wireless 802.11n (AM) 8 Pack AP

JG687A

  • 1 RJ-45 autosensing 10/100/1000 port (Each)

 

 

 

HP 425 Wireless 802.11n (WW) AP

JG654A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:2

 

 

HP 425 Wireless 802.11n (WW) 8 Pack AP

JG688A

  • 1 RJ-45 autosensing 10/100/1000 port (Each)

See Configuration NOTE:2

 

 

HP 425 Wireless 802.11n (JP) AP

JG655A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

HP 425 Wireless 802.11n (IL) AP

JG656A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:3

 

 

MSM430 Dual Radio 802.11n AP (AM)

J9650A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

HP MSM430 Dual Radio 802.11n Access Point (WW)

J9651A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:2

 

 

MSM430 Dual Radio 802.11n AP (WW)

J9651A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:2

 

 

HP MSM430 Dual Radio 802.11n Access Point (JP)

J9652A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

MSM430 Dual Radio 802.11n AP (JP)

J9652A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

HP MSM430 Dual Radio 802.11n Access Point (IL)

J9653A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:3

 

 

MSM430 Dual Radio 802.11n AP (IL)

J9653A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:3

 

 

HP MSM460 Dual Radio 802.11n Access Point (AM)

J9590A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

MSM460 Dual Radio 802.11n AP (AM)

J9590A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

HP MSM460 Dual Radio 802.11n Access Point (WW)

J9591A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:2

 

 

MSM460 Dual Radio 802.11n AP (WW)

J9591A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:2

 

 

HP MSM460 Dual Radio 802.11n Access Point (JP)

J9589A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

MSM460 Dual Radio 802.11n AP (JP)

J9589A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

HP MSM460 Dual Radio 802.11n Access Point (IL)

J9618A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:3

 

 

MSM460 Dual Radio 802.11n AP (IL)

J9618A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:3

 

 

HP MSM466 Dual Radio 802.11n Access Point (AM)

J9621A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

MSM466 Dual Radio 802.11n AP (AM)

J9621A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

HP MSM466 Dual Radio 802.11n Access Point (WW)

J9622A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:2

 

 

MSM466 Dual Radio 802.11n AP (WW)

J9622A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:2

 

 

HP MSM466 Dual Radio 802.11n Access Point (JP)

J9620A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

MSM466 Dual Radio 802.11n AP (JP)

J9620A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

HP MSM466 Dual Radio 802.11n Access Point (IL)

J9619A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:3

 

 

MSM466 Dual Radio 802.11n AP (IL)

J9619A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:3

 

 

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (AM)

J9715A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (WW)

J9716A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:2

 

 

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (JP)

J9717A

  • 1 RJ-45 autosensing 10/100/1000 port

 

 

 

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (IL)

J9718A

  • 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:3

 

 

Configuration Rules:

 

 

 

Note 2

Not available Israel. (Warning in Clic only)

 

 

 

 

Note 3

Only available in Israel. (Warning in Clic only)

 

 

 

 

 

Access Point Options

 

 

 

External Power Supplies

HP 1-port Power Injector

J9407B

 

 

 

 

HP Gigabit IntelliJack 48V Power Supply

JD055B

 

 

See Configuration NOTE:1, 2

 

 

 

 

HP Single-PRT 802.3at Gig PoE PS

J9867A

 

 

See Configuration NOTE:2, 3

 

 

 

 

Configuration Rules:

 

 

 

 

 

Note 1

This power supply is supported on the following Access Points:
JG653A - HP 425 Wireless 802.11n (AM) AP
JG687A - HP 425 Wireless 802.11n (AM) 8 Pack AP
JG654A - HP 425 Wireless 802.11n (WW) AP
JG688A - HP 425 Wireless 802.11n (WW) 8 Pack AP
JG655A - HP 425 Wireless 802.11n (JP) AP
JG656A - HP 425 Wireless 802.11n (IL) AP

 

 

 

 

Note 2

Localization required. (See Localization Menu)

 

 

 

 

Note 3

This power supply is supported on the following Access Points:
J9715A - HP MSM466-R Dual Radio Outdoor 802.11n Access Point (AM)
J9716A - HP MSM466-R Dual Radio Outdoor 802.11n Access Point (WW)
J9717A - HP MSM466-R Dual Radio Outdoor 802.11n Access Point (JP)
J9718A - HP MSM466-R Dual Radio Outdoor 802.11n Access Point (IL)

 

 

 

External Antenna

HP Indoor Omnidirectional Dual Band 2.5/6dBi MIMO 6
Element Antenna

J9659A

 

 

See Configuration NOTE:1

 

 

 

 

HP Indoor Omnidirectional Dual Band 3/4dBi MIMO 3
Element Antenna

J9171A

 

 

See Configuration NOTE:1

 

 

 

 

HP Indoor-Outdoor Narrow Sector Dual Band 8/10dBi
MIMO 3 Element Antenna

J9169A

 

 

See Configuration NOTE:1, 4

 

 

 

 

HP Indoor-Outdoor Point-to-Point Dual Band 10/13dBi
MIMO 3 Element Antenna

J9170A

 

 

See Configuration NOTE:1, 4

 

 

 

 

HP Antenna Lightning Arrester

J8996A

 

 

See Configuration NOTE:1

 

 

 

 

HP Outdoor Omnidirectional 6dBi at 2.4GHz MIMO 3
Element Antenna

J9719A

 

 

See Configuration NOTE:2, 3

 

 

 

 

HP Outdoor Omnidirectional 8dBi at 5GHz MIMO 3
Element Antenna

J9720A

 

 

See Configuration NOTE:2, 3

 

 

 

 

HP Indoor Omni 2.5/6dBi MIMO 4 Elmnt Ant

JG696A

 

 

See Configuration NOTE:5

 

 

 

Configuration Rules:

 

 

 

 

Note 1

This Antenna is supported on the following Access Points:

 

HP MSM466 Dual Radio 802.11n Access Point (JP)

J9620A

MSM466 Dual Radio 802.11n AP (JP)

J9620B

HP MSM466 Dual Radio 802.11n Access Point (AM)

J9621A

MSM466 Dual Radio 802.11n AP (AM)

J9621B

HP MSM466 Dual Radio 802.11n Access Point (WW)

J9622A

MSM466 Dual Radio 802.11n AP (WW)

J9622B

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (AM)

J9715A

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (WW)

J9716A

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (JP)

J9717A

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (IL)

J9718A

HP MSM466 Dual Radio 802.11n Access Point (IL)

J9619A

MSM466 Dual Radio 802.11n AP (IL)

J9619B

 

 

Note 2

This Antenna is supported on the following Access Points:

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (AM)

J9715A

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (WW)

J9716A

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (JP)

J9717A

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (IL)

J9718A

 

 

 

Note 3

If this Antenna is select then THREE of the following Lightning Arresters per sku ordered is required:

 

 

HP Antenna Lightning Arrester

J8996A

 

 

Note 4

If this Antenna is select then THREE of the following Lightning Arresters per sku ordered is required for Outdoor use:

HP Antenna Lightning Arrester

J8996A

 

 

 

Note 5

This Antenna is supported on the following Access Points:

 

 

 HP 425 Wireless 802.11n (AM) AP

JG653A

 

 HP 425 Wireless 802.11n (AM) 8 Pack AP

JG687A

 

 HP 425 Wireless 802.11n (WW) AP

JG654A

 

 HP 425 Wireless 802.11n (WW) 8 Pack AP

JG688A

 

 HP 425 Wireless 802.11n (JP) AP

JG655A

 

 HP 425 Wireless 802.11n (IL) AP

JG656A

 

 

 

Remarks:

If you plan on connecting an outdoor antenna to the unit make sure that proper lightning surge protection and grounding precautions are taken according to local electrical code.

 

Technical Specifications

 

HP MSM430 Dual Radio 802.11n Access Point (AM) (J9650A)

HP MSM430 Dual Radio 802.11n Access Point (WW) (J9651A)

HP MSM430 Dual Radio 802.11n Access Point (JP) (J9652A)

HP MSM430 Dual Radio 802.11n Access Point (IL) (J9653A)

HP MSM430 Dual Radio 802.11n Access Point (TAA) (J9654A)

HP MSM430 Dual Radio 802.11n Access Point (BR) (JL009A)

I/O ports and slots

1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Additional ports and slots

1 RJ-45 serial console port

AP characteristics

Radios (built-in)

802.11a/n, b/g/n

Radio operation modes

Client access, Local mesh, Packet capture

AP operation modes

Autonomous and controlled

Wi-Fi Alliance Certification

a/b/g/n Wi-Fi Certified

Antenna

(3) 5 dBi 2.4 GHz and (3) 7 dBi 5 GHz omnidirectional antennas

Number of internal antennas

6

Physical characteristics

Dimensions

8(w) x 6.75(d) x 2.62(h) in (20.32 x 17.15 x 6.65 cm)

Weight

2.25 lb (1.02 kg) mounting bracket

Memory and processor

Dual core @ 800 MHz, 128 MB flash, 256 MB SDRAM

Mounting and enclosure

Indoor, plenum rated;Includes two ceiling mounting clips

Environment

Operating temperature

32°F to 122°F (0°C to 50°C)

Operating relative humidity

5% to 95%, noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Electrical characteristics

Description

IEEE 802.3af PoE compliant for Gigabit Ethernet

Maximum power rating

12.9 W

Frequency band and operating channels

Americas

2.412 - 2.462 GHz (1 - 11 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5670 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)

European Union

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)

Rest of World (Actual channels designated by selecting country in UI)

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)
5.745 - 5.825 GHz (149 - 165 channels)

Taiwan

2.412 - 2.462 GHz (1 - 11 channels)
5.280 - 5.320 GHz (56 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5670 MHz) channels)

Japan

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)

Israel

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)

Radio

FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; ARIB STD-T66; IDA Registration (Singapore); RCR STD-33; ARIB STD-T71 (Japan); EN 301 893 (EU); KCC approval (Korea)

Safety

UL 2043; UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Emissions

EN 55022 Class B; EN 301 489-1; EN 301 489-17; ICES-003 Class B; FCC Part 15, Class B

Medical

EN60601-1-2

RF Exposure

FCC Bulletin OET-65C; RSS-102; CFR 47, Part 2, Subpart J; ANSI/IEEE C95.1 (99); Ministry of Health Safety Code 6; Australian Radiation Protection Std.

Features

Dual radio: IEEE 802.11a/n for high-throughput applications and IEEE 802.11b/g/n for legacy support and high-speed applications
- Integrated antennas for both IEEE radios, supporting two spatial streams and 3x3 MIMO
- Six embedded antennas
- Both radios operate at full power and full performance on IEEE 802.3af PoE/Gigabit Ethernet

Notes

The MSM430 and MSM460 access point power information listed includes the embedded antenna. Review the HP documentation for your AP to understand the maximum output setting for your AP based on your country's regulations.
Two spatial stream AP, supporting 300 Mb/s per radio.
Maximum transmit power varies by country.
Regulatory model number: MRLBB-1001

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services  for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

 

NOTE: These radio characteristics apply to the MSM430 and MSM460 access points, including the embedded antenna.

IEEE 802.11n 5 GHz @ 40 MHz channel

Data rate

MCS0,
MCS8,
MCS16
45 Mbps

MCS7,
MCS15,
MCS23
450 Mbps

Receiver sensitivity

-97 dBm

-80 dBm

Transmit power

24 dBm

19 dBm

802.11n 5 GHz @ 20 MHz channel

Data rate

MCS0,
MCS8,
MCS16
21.7 Mbps

MCS7,
MCS15,
MCS23
216.7 Mbps

Receiver sensitivity

-100 dBm

-84 dBm

Transmit power

24 dBm

19 dBm

IEEE 802.11n 2.4 GHz @ 40 MHz channel

Data rate

MCS0,
MCS8,
MCS16
45 Mbps

MCS7,
MCS15,
MCS23
450 Mbps

Receiver sensitivity

-95 dBm

-80 dBm

Transmit power

25 dBm

21dBm

IEEE 802.11n 2.4 GHz @ 20 MHz channel

Data rate

MCS0,
MCS8,
MCS16
21.7 Mbps

MCS7,
MCS15,
MCS23
216.7 Mbps

Receiver sensitivity

-98 dBm

-82 dBm

Transmit power

25 dBm

22 dBm

IEEE 802.11a 5 GHz

Data rate

6 Mbps

54 Mbps

Receiver sensitivity

-100 dBm

-87 dBm

Transmit power

27 dBm

25 dBm

 

IEEE 802.11b/g 2.4 GHz

Data rate

1 Mbps

11 Mbps

6 Mbps

54 Mbps

Receiver sensitivity

-100 dBm

-95 dBm

-99 dBm

-85 dBm

Transmit power

25 dBm

25 dBm

25 dBm

23 dBm

MCS Index

800 nS Guard Interval

400 nS Guard Interval

 

20 MHz Rate (Mbps)

40 MHz Rate (Mbps)

20 MHz Rate (Mbps)

40 MHz Rate (Mbps)

0

6.5

13.5

7.2

15

1

13

27

14.4

30

2

19.5

40.5

21.7

45

3

26

54

28.9

60

4

39

81

43.3

90

5

52

108

57.8

120

6

58.5

121.5

65

135

7

65

135

72.2

157.5

8

13

27

14.4

30

9

26

54

28.9

60

10

39

81

43.3

90

11

52

108

57.8

120

12

78

162

86.7

180

13

104

216

115.6

240

14

117

243

130

270

15

130

270

144.4

300


 

HP MSM460 Dual Radio 802.11n Access Point (AM) (J9590A)

HP MSM460 Dual Radio 802.11n Access Point (WW) (J9591A)

HP MSM460 Dual Radio 802.11n Access Point (JP) (J9589A)

HP MSM460 Dual Radio 802.11n Access Point (IL) (J9618A)

HP MSM460 Dual Radio 802.11n Access Point (TAA) (J9655A)

HP MSM460 Dual Radio 802.11n Access Point (BR) (JL010A)

I/O ports and slots

1 RJ-45 autosensing 10/100/1000 port; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

Additional ports and slots

1 RJ-45 serial console port

AP characteristics

Radios (built-in)

802.11 a/n, b/g/n

Radio operation modes

Client access, Local mesh, Packet capture

AP operation modes

Autonomous and controlled

Wi-Fi Alliance Certification

a/b/g/n Wi-Fi Certified

 

Antenna

(3) 5 dBi 2.4 GHz and (3) 7 dBi 5 GHz

 

Number of internal antennas

6

Physical characteristics

Dimensions

8(w) x 6.75(d) x 2.62(h) in (20.32 x 17.15 x 6.65 cm)

Weight

2.25 lb (1.02 kg) mounting bracket

Memory and processor

Dual core @ 800 MHz, 128 MB flash, 256 MB SDRAM

Mounting

Indoor, plenum rated;Includes two ceiling mounting clips

Environment

Operating temperature

32°F to 122°F (0°C to 50°C)

Operating relative humidity

5% to 95%, noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Electrical characteristics

Description

IEEE 802.3af PoE compliant for Gigabit Ethernet

Maximum power rating

12.9 W

Frequency band and operating channels

Americas

2.412 - 2.462 GHz (1 - 11 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5670 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)

European Union

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)

Rest of World (Actual channels designated by selecting country in UI)

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)
5.745 - 5.825 GHz (149 - 165 channels)

Taiwan

2.412 - 2.462 GHz (1 - 11 channels)
5.280 - 5.320 GHz (56 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5670 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)

Japan

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)

Israel

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)

Radio

FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; ARIB STD-T66; IDA Registration (Singapore); RCR STD-33; ARIB STD-T71 (Japan); EN 301 893 (EU); KCC approval (Korea)

Safety

UL 2043; UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Emissions

EN 55022 Class B; EN 301 489-1; EN 301 489-17; ICES-003 Class B; FCC Part 15, Class B

Medical

EN60601-1-2

RF Exposure

FCC Bulletin OET-65C; RSS-102; CFR 47, Part 2, Subpart J; ANSI/IEEE C95.1 (99); Ministry of Health Safety Code 6; Australian Radiation Protection Std.

Features

Dual radio: IEEE 802.11a/n for high-throughput applications and IEEE 802.11b/g/n for legacy support and high-speed applications
- Integrated antennas for both IEEE radios, supporting three spatial streams and 3x3 MIMO reaching 450 Mb/s per radio
- Six embedded antennas
- Both radios operate at full power and full performance on IEEE 802.3af PoE/Gigabit Ethernet

Notes

The MSM430 and MSM460 access point power information listed includes the embedded antenna. Review the HP documentation for your AP to understand the maximum output setting for your AP based on your country's regulations.
Three spatial stream AP, supporting 450 Mb/s per radio.
Maximum transmit power varies by country.
Regulatory model number: MRLBB-1001

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services  for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

 

NOTE: These radio characteristics apply to the MSM430 and MSM460 access points, including the embedded antenna.

IEEE 802.11n 5 GHz @ 40 MHz channel

Data rate

MCS0,
MCS8,
MCS16
45 Mbps

MCS7,
MCS15,
MCS23
450 Mbps

Receiver sensitivity

-97 dBm

-80 dBm

Transmit power

24 dBm

19 dBm

802.11n 5 GHz @ 20 MHz channel

Data rate

MCS0,
MCS8,
MCS16
21.7 Mbps

MCS7,
MCS15,
MCS23
216.7 Mbps

Receiver sensitivity

-100 dBm

-84 dBm

Transmit power

24 dBm

19 dBm

IEEE 802.11n 2.4 GHz @ 40 MHz channel

Data rate

MCS0,
MCS8,
MCS16
45 Mbps

MCS7,
MCS15,
MCS23
450 Mbps

Receiver sensitivity

-95 dBm

-80 dBm

Transmit power

25 dBm

21dBm

IEEE 802.11n 2.4 GHz @ 20 MHz channel

Data rate

MCS0,
MCS8,
MCS16
21.7 Mbps

MCS7,
MCS15,
MCS23
216.7 Mbps

Receiver sensitivity

-98 dBm

-82 dBm

Transmit power

25 dBm

22 dBm

IEEE 802.11a 5 GHz

Data rate

6 Mbps

54 Mbps

Receiver sensitivity

-100 dBm

-87 dBm

Transmit power

27 dBm

25 dBm

 

IEEE 802.11b/g 2.4 GHz

Data rate

1 Mbps

11 Mbps

6 Mbps

54 Mbps

Receiver sensitivity

-100 dBm

-95 dBm

-99 dBm

-85 dBm

Transmit power

25 dBm

25 dBm

25 dBm

23 dBm

MCS Index

800 nS Guard Interval

400 nS Guard Interval

 

20 MHz Rate (Mbps)

40 MHz Rate (Mbps)

20 MHz Rate (Mbps)

40 MHz Rate (Mbps)

0

6.5

13.5

7.2

15

1

13

27

14.4

30

2

19.5

40.5

21.7

45

3

26

54

28.9

60

4

39

81

43.3

90

5

52

108

57.8

120

6

58.5

121.5

65

135

7

65

135

72.2

157.5

8

13

27

14.4

30

9

26

54

28.9

60

10

39

81

43.3

90

11

52

108

57.8

120

12

78

162

86.7

180

13

104

216

115.6

240

14

117

243

130

270

15

130

270

144.4

300


 

HP MSM466 Dual Radio 802.11n Access Point (AM) (J9621A)

HP MSM466 Dual Radio 802.11n Access Point (WW) (J9622A)

HP MSM466 Dual Radio 802.11n Access Point (JP) (J9620A)

HP MSM466 Dual Radio 802.11n Access Point (IL) (J9619A)

HP MSM466 Dual Radio 802.11n Access Point (TAA) (J9656A)

I/O ports and slots

1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Additional ports and slots

1 RJ-45 serial console port

AP characteristics

Radios (built-in)

802.11a/n, a/b/g/n

Radio operation modes

Client access, Local mesh, Packet capture

AP operation modes

Autonomous and controlled

Wi-Fi Alliance Certification

a/b/g/n Wi-Fi Certified

 

Antenna

External antennas only; six RP-SMA connectors

 

Number of external antennas

6

Physical characteristics

Dimensions

8(w) x 6.75(d) x 2.62(h) in (20.32 x 17.15 x 6.65 cm)

Weight

2.25 lb (1.02 kg) mounting bracket

Memory and processor

Dual core @ 800 MHz, 128 MB flash, 256 MB SDRAM

Mounting and enclosure

Indoor, plenum rated;Includes two ceiling mounting clips

Environment

Operating temperature

32°F to 122°F (0°C to 50°C)

Operating relative humidity

5% to 95%, noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Electrical characteristics

Description

IEEE 802.3af PoE compliant for Gigabit Ethernet

Maximum power rating

12.9 W

Frequency band and operating channels

Americas

2.412 - 2.462 GHz (1 - 11 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5670 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)

European Union

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)

Rest of World (Actual channels designated by selecting country in UI)

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)
5.745 - 5.825 GHz (149 - 165 channels)

Taiwan

2.412 - 2.462 GHz (1 - 11 channels)
5.280 - 5.320 GHz (56 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5670 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)

Japan

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)

Israel

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)

Radio

FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; ARIB STD-T66; IDA Registration (Singapore); RCR STD-33; ARIB STD-T71 (Japan); EN 301 893 (EU); KCC approval (Korea)

Safety

UL 2043; UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Emissions

EN 55022 Class B; EN 301 489-1; EN 301 489-17; ICES-003 Class B; FCC Part 15, Class B

Medical

EN60601-1-2

RF Exposure

FCC Bulletin OET-65C; RSS-102; CFR 47, Part 2, Subpart J; ANSI/IEEE C95.1 (99); Ministry of Health Safety Code 6; Australian Radiation Protection Std.; To ensure compliance with various national and international Electromagnetic Field (EMF) standards, this device should only be operated with HP-approved antennas and accessories.

Features

Dual radio: IEEE 802.11a/n for high-throughput applications and IEEE 802.11a/b/g/n for legacy support and high-speed applications
- Both IEEE radios, supporting three spatial streams and 3x3 MIMO reaching 450 Mb/s per radio.
- Six RP-SMA connectors for external MIMO antennas
- Both radios operate at full power and full performance on IEEE 802.3af PoE/Gigabit Ethernet
- Both radios can operate in the 5 GHz band for the highest performance

Notes

The MSM466 and MSM466-R access point power information listed does not include an antenna. Review the HP documentation for your AP to understand the maximum output setting for your AP based on your country's regulations.
Three spatial stream AP, supporting 450 Mb/s per radio.
Maximum transmit power varies by country.
When used with an HP MIMO outdoor antenna, the AP requires a RP-SMA to N Type adapter/cable (available separately).
Outdoor antennas should be installed by a professional installer with proper grounding and lightning protection.
Regulatory model number: MRLBB-1002

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services  for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

 

NOTE: These radio characteristics apply to the MSM466 and MSM466-R access points and exclude any external antenna.

IEEE 802.11n 5 GHz @ 40 MHz channel

Data rate

MCS0,
MCS8,
MCS16
45 Mbps

MCS7,
MCS15,
MCS23
450 Mbps

Receiver sensitivity

-90 dBm

-73 dBm

Transmit power

17 dBm

12 dBm

IEEE 802.11n 5 GHz @ 20 MHz channel

Data rate

MCS0,
MCS8,
MCS16
21.7 Mbps

MCS7,
MCS15,
MCS23
216.7 Mbps

Receiver sensitivity

-93 dBm

-77 dBm

Transmit power

17 dBm

12 dBm

IEEE 802.11n 2.4 GHz @ 40 MHz channel

Data rate

MCS0,
MCS8,
MCS16
45 Mbps

MCS7,
MCS15,
MCS23
450 Mbps

Receiver sensitivity

-90 dBm

-75 dBm

Transmit power

20 dBm

16 dBm

IEEE 802.11n 2.4 GHz @ 20 MHz channel

Data rate

MCS0,
MCS8,
MCS16
21.7 Mbps

MCS7,
MCS15,
MCS23
216.7 Mbps

Receiver sensitivity

-93 dBm

-77 dBm

Transmit power

20 dBm

17 dBm

IEEE 802.11a 5 GHz

Data rate

6 Mbps

54 Mbps

Receiver sensitivity

-93 dBm

-80 dBm

Transmit power

20 dBm

18 dBm

Radio characteristics: IEEE 802.11a 2.4 GHz

Data rate

1 Mbps

54 Mbps

Receiver sensitivity

-100 dBm

-80 dBm

Transmit power

20 dBm

18 dBm

Standards and protocols
(applies to all products in series)

Mobility
IEEE 802.11a High Speed Physical Layer in the 5 GHz Band
IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band
IEEE 802.11d Global Harmonization
IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band
IEEE 802.11i Medium Access Control (MAC) Security Enhancements
IEEE 802.11n WLAN Enhancements for Higher Throughput

 

MCS Index

800 nS Guard Interval

400 nS Guard Interval

 

20 MHz Rate (Mbps)

40 MHz Rate (Mbps)

20 MHz Rate (Mbps)

40 MHz Rate (Mbps)

0

6.5

13.5

7.2

15

1

13

27

14.4

30

2

19.5

40.5

21.7

45

3

26

54

28.9

60

4

39

81

43.3

90

5

52

108

57.8

120

6

58.5

121.5

65

135

7

65

135

72.2

157.5

8

13

27

14.4

30

9

26

54

28.9

60

10

39

81

43.3

90

11

52

108

57.8

120

12

78

162

86.7

180

13

104

216

115.6

240

14

117

243

130

270

15

130

270

144.4

300

16

19.5

40.5

21.7

45

17

39

81

43.4

90

18

58.5

121.5

65

135

19

78

162

86.7

180

20

117

243

130

270

21

156

324

173.3

360

22

178.5

364

195

405

23

195

405

216.7

450


 

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (AM) (J9715A)

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (WW) (J9716A)

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (JP)
(J9717A)

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (IL)
(J9718A)

I/O ports and slots

RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

AP characteristics

Radios (built-in)

802.11 a/n, a/b/g/n

Radio operation modes

Client access, Local mesh, Packet capture

AP operation modes

Autonomous and controlled

Wi-Fi Alliance Certification

a/b/g/n Wi-Fi Certified

 

Antenna

External antennas only; six Type N connectors

 

Number of external antennas

6

Physical characteristics

Dimensions

4.92(w) x 8.27(d) x 9.84(h) in (12.5 x 21.01 x 24.99 cm)

Weight

6.06 lb (2.75 kg) mounting bracket

Memory and processor

Dual core @ 800 MHz, 128 MB flash, 256 MB SDRAM

Mounting and enclosure

Outdoor IP67 and NEMA 4X;Includes hardware for pole and wall mount applications

Environment

Operating temperature

-40°F to 131°F (-40°C to 55°C); Below -20°C requires 802.3at PoE power to run embedded heater

Operating relative humidity

5% to 95%, noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Electrical characteristics

Description

IEEE 802.3af PoE compliant for Gigabit Ethernet for operation down to -4°F (-20°C). For operation down to -40°F (-40°C), IEEE 802.3at power is required.

Maximum power rating

12.9 W

 

Notes

Antenna is purchased separately. For temperatures below -4°F (-20°C), IEEE 802.3at
PoE power is required to run the embedded heater. The maximum power draw is 25 W.

Frequency band and operating channels

Americas

2.412 - 2.462 GHz (1 - 11 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)

European Union

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)

Rest of World (Actual channels designated by selecting country in UI)

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)
5.745 - 5.825 GHz (149 - 165 channels)

Taiwan

2.412 - 2.462 GHz (1 - 11 channels)
5.280 - 5.320 GHz (56 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)

Japan

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)

Israel

2.412 - 2.472 GHz (1 - 13 channels)

Radio

FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; ARIB STD-T66;IDA Registration (Singapore); RCR STD-33; ARIB STD-T71 (Japan); EN 301 893 (EU); KCC approval (Korea)

Safety

UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; EN62479

Emissions

EN 55022 Class B; EN 301 489-1; EN 301 489-17; ICES-003 Class B; FCC Part 15, Class B

Medical

EN60601-1-2

RF Exposure

FCC Bulletin OET-65C; RSS-102; EN 300-328; ETS 301 893; CFR 47, Part 2, Subpart J; ANSI/IEEE C95.1 (99); Ministry of Health Safety Code 6; Australian Radiation Protection Std.; To ensure compliance with various national and international Electromagnetic Field (EMF) standards, this device should only be operated with HP-approved antennas and accessories.

Features

Dual radio: IEEE 802.11a/n for high-throughput applications and IEEE 802.11ab/g/n for legacy support and high-speed applications
- Both IEEE radios, supporting three spatial streams and 3x3 MIMO reaching 450 Mb/s per radio
- Six Type N connectors for external MIMO antennas
- Both radios operate at full power and full performance on IEEE 802.3af PoE/Gigabit Ethernet
- Run both radios at 5 GHz for outstanding performance

Outdoor enclosure
- IP67 rate
- NEMA 4X rated
- -40°C to +55°C

Notes

The MSM466 and MSM466-R access point power information listed does not include an antenna. Review the HP documentation for your AP to understand the maximum output setting for your AP based on your country's regulations.
Three spatial stream AP, supporting 450 Mb/s per radio.
Maximum transmit power varies by country.
When used with an HP MIMO indoor antenna, the AP requires an RP-SMA to N Type adapter/cable (available separately).
Outdoor antennas should be installed by a professional installer with proper grounding and lightning protection.
Wind speeds are supported up to 165 m/h (265 km/h).
Dimensions do not include the additional space required for cables.
Regulatory model number: MRLBB-1102
Additional Railway EMC emission standards
• EN 55011
• EN 50121-3-2

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services  for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

 

NOTE: These radio characteristics apply to the MSM466 and MSM466-R access points and exclude any external antenna.

IEEE 802.11n 5 GHz @ 40 MHz channel

Data rate

MCS0,
MCS8,
MCS16
45 Mbps

MCS7,
MCS15,
MCS23
450 Mbps

Receiver sensitivity

-90 dBm

-73 dBm

Transmit power

17 dBm

12 dBm

IEEE 802.11n 5 GHz @ 20 MHz channel

Data rate

MCS0,
MCS8,
MCS16
21.7 Mbps

MCS7,
MCS15,
MCS23
216.7 Mbps

Receiver sensitivity

-93 dBm

-77 dBm

Transmit power

17 dBm

12 dBm

IEEE 802.11n 2.4 GHz @ 40 MHz channel

Data rate

MCS0,
MCS8,
MCS16
45 Mbps

MCS7,
MCS15,
MCS23
450 Mbps

Receiver sensitivity

-90 dBm

-75 dBm

Transmit power

20 dBm

16 dBm

IEEE 802.11n 2.4 GHz @ 20 MHz channel

Data rate

MCS0,
MCS8,
MCS16
21.7 Mbps

MCS7,
MCS15,
MCS23
216.7 Mbps

Receiver sensitivity

-93 dBm

-77 dBm

Transmit power

20 dBm

17 dBm

IEEE 802.11a 5 GHz

Data rate

6 Mbps

54 Mbps

Receiver sensitivity

-93 dBm

-80 dBm

Transmit power

20 dBm

18 dBm

Radio characteristics: IEEE 802.11a 2.4 GHz

Data rate

1 Mbps

54 Mbps

Receiver sensitivity

-100 dBm

-80 dBm

Transmit power

20 dBm

18 dBm

Standards and protocols
(applies to all products in series)

Mobility
IEEE 802.11a High Speed Physical Layer in the 5 GHz Band
IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band
IEEE 802.11d Global Harmonization
IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band
IEEE 802.11i Medium Access Control (MAC) Security Enhancements
IEEE 802.11n WLAN Enhancements for Higher Throughput

 

MCS Index

800 nS Guard Interval

400 nS Guard Interval

 

20 MHz Rate (Mbps)

40 MHz Rate (Mbps)

20 MHz Rate (Mbps)

40 MHz Rate (Mbps)

0

6.5

13.5

7.2

15

1

13

27

14.4

30

2

19.5

40.5

21.7

45

3

26

54

28.9

60

4

39

81

43.3

90

5

52

108

57.8

120

6

58.5

121.5

65

135

7

65

135

72.2

157.5

8

13

27

14.4

30

9

26

54

28.9

60

10

39

81

43.3

90

11

52

108

57.8

120

12

78

162

86.7

180

13

104

216

115.6

240

14

117

243

130

270

15

130

270

144.4

300

16

19.5

40.5

21.7

45

17

39

81

43.4

90

18

58.5

121.5

65

135

19

78

162

86.7

180

20

117

243

130

270

21

156

324

173.3

360

22

178.5

364

195

405

23

195

405

216.7

450

Accessory Product Details

 

NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.


 

HP 1-port Power Injector (J9407B)

Physical characteristics

Dimensions

5.71(d) x 2.36(w) x 1.22(h) in. (14.5 x 6 x 3.1 cm)

Weight

1 lb. (0.45 kg)

Environment

Operating temperature

32°F to 104°F (0°C to 40°C)

Operating relative humidity

5% to 93%, noncondensing

Nonoperating/Storage temperature

-4°F to 158°F (-20°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Altitude

up to 10,000 ft. (3 km)

Electrical characteristics

Voltage

100-240 VAC

Current

0.3/0.2 A

Frequency

50/60 Hz

Notes

IEEE 802.3af compliant

Safety

UL 60950; EN 60950

Emissions

EN 55024; EN 55022 (CISPR 22) Class B with FTP Cabling; FCC Part 15, Class B with FTP cabling

Notes

The 1-port power converter has 1 AC power cord input, 1 RJ-45 10/100/1000 Mbps port for data coming from the network infrastructure, and 1 RJ-45 for data plus IEEE 802.3af-compliant PoE for Gigabit Ethernet to power the access point.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services  for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.


 

HP Indoor Omnidirectional Dual Band 2.5/6dBi MIMO 6 Element Antenna (J9659A)

Electrical characteristics

Frequency range 1

2400 - 2500

Gain 1 dBi (with antenna cable)

2.5

Frequency range 2

5150 - 5850

Gain 2 dBi (with antenna cable)

5.9

VSWR max

2:0

H-Plane (3 dB beamwidth)

Omnidirectional

Polarization

Linear (vertical)

Impedance (Ohms)

50

RF connector

Reverse SMA (male)

Cable length

2.75 ft. (0.84 m)

Physical characteristics

Dimensions

8.58(d) x 1.69(h) in. (21.79 x 4.29 cm)

Weight

1.5 lb. (0.68 kg)

Mounting style

Single 1 inch diameter hole

Enclosure

Polycarbonate

Environment

Operating temperature

-22°F to 131°F (-30°C to 55°C)

Nonoperating/Storage temperature

-40°F to 149°F (-40°C to 65°C)

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services  for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.


 

HP Indoor Omnidirectional Dual Band 3/4dBi MIMO 3 Element Antenna (J9171A)

Electrical characteristics

Frequency range 1

2400 - 2500

Gain 1 dBi (with antenna cable)

3

Frequency range 2

4900 - 5900

Gain 2 dBi (with antenna cable)

4

VSWR max

2:1

E-Plane (3 dB beamwidth)

60 degrees

H-Plane (3 dB beamwidth)

Omnidirectional

Polarization

Linear (vertical)

Impedance (Ohms)

50

RF connector

Reverse SMA (male)

Cable length

2.75 ft. (0.84 m)

Physical characteristics

Dimensions

3.6(d) x 12.14(w) x 0.87(h) in. (9.14 x 30.84 x 2.21 cm)

Weight

0.86 lb. (0.39 kg)

Mounting style

Ceiling

Enclosure

White ASA IP-67 rated

Environment

Operating temperature

-22°F to 131°F (-30°C to 55°C)

Nonoperating/Storage temperature

-40°F to 149°F (-40°C to 65°C)

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services  for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.


 

HP Indoor-Outdoor Sector Dual Band 8/10dBi MIMO 3 Element Antenna (J9169A)

Electrical characteristics

Frequency range 1

2400 - 2500

Gain 1 dBi (with antenna cable)

8

Frequency range 2

5100 - 5900

Gain 2 dBi (with antenna cable)

10.7

VSWR max

2:1

E-Plane (3 dB beamwidth)

75/55

H-Plane (3 dB beamwidth)

70/60

Polarization

Linear (vertical)

Impedance (Ohms)

50

RF connector

N (male)

Cable length

2.75 ft. (0.84 m)

Physical characteristics

Dimensions

3.6(d) x 12.14(w) x 0.87(h) in. (9.14 x 30.84 x 2.21 cm)

Weight

0.86 lb. (0.39 kg)

Mounting style

Ceiling

Enclosure

White ASA IP-67 rated

Environment

Operating temperature

-22°F to 149°F (-30°C to 65°C); IP-67 rated for outdoor use

Nonoperating/Storage temperature

-40°F to 149°F (-40°C to 65°C)

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services  for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.


 

HP Indoor-Outdoor Point-to-Point Dual Band 10/13dBi MIMO 3 Element Antenna (J9170A)

Electrical characteristics

Frequency range 1

2400 - 2500

Gain 1 dBi (with antenna cable)

10.9

Frequency range 2

5100 - 5900

Gain 2 dBi (with antenna cable)

13.5

VSWR max

2:1

E-Plane (3 dB beamwidth)

45/20 degrees

H-Plane (3 dB beamwidth)

45/20 degrees

Polarization

Linear (vertical)

Impedance (Ohms)

50

RF connector

N (male)

Cable length

2.75 ft. (0.84 m)

Physical characteristics

Dimensions

1.4(d) x 16.2(w) x 14.7(h) in. (3.56 x 41.15 x 37.34 cm)

Weight

2.43 lb. (1.1 kg)

Mounting style

Pole Mount

Enclosure

White ASA IP-67 rated

Environment

Operating temperature

-22°F to 149°F (-30°C to 65°C); IP-67 rated for outdoor use

Nonoperating/Storage temperature

-40°F to 149°F (-40°C to 65°C)

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services  for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.


 

HP Dual-Band Antenna Lightning Arrester (J8996A)

Electrical characteristics

VSWR max

1.4:1

Physical characteristics

Dimensions

2.4(d) x 0.9(w) x 1.2(h) in. (6.1 x 2.29 x 3.05 cm)

Notes

Input RF power, 100 MHz/6000 MHz: 250 W/10 W
50 Meg Ohm insulation resistance
Maximum insertion loss of 0.4 dB

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services  for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.


 

HP Outdoor Omnidirectional 6dBi at 2.4GHz MIMO 3 Element Antenna (J9719A)

Electrical characteristics

Frequency range 1

2400 - 2500

Gain 1 dBi (with antenna cable)

6

Impedance (Ohms)

50

RF connector

N Type (Male) x 3

Cable length

3 ft. (.9 m)

Physical characteristics

Dimensions

8.25(d) x 10(h) in. (20.96 x 25.4 cm)

Wind surface area

.32 sq. ft. (0.03 sq. m)

Wind survival

125 mph (201.13 km/hr)

Wind gust surival

165 mph (266 km/h)

Mounting style

Pole or Wall

Environment

Operating temperature

-40°F to 158°F (-40°C to +70°C)
(Cable Install Low Temp -20°C)

Nonoperating/Storage temperature

-40°F to 185°F (-40°C to 85°C)

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services  for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.


 

HP Outdoor Omnidirectional 8dBi at 5GHz MIMO 3 Element Antenna (J9720A)

Electrical characteristics

Frequency range 1

5150 - 5875

Gain 1 dBi (with antenna cable)

8

Impedance (Ohms)

50

RF connector

N Type (Male) x 3

Cable length

3 ft. (.9 m)

Physical characteristics

Dimensions

8.25(d) x 10(h) in. (20.96 x 25.4 cm)

Wind surface area

.32 sq. ft. (0.03 sq. m)

Wind survival

125 mph (201.13 km/hr)

Wind gust survival

165 mph (266 km/h)

Mounting style

Pole or Wall

Environment

Operating temperature

-40°F to 158°F (-40°C to +70°C)
(Cable Install Low Temp -20°C)

Nonoperating/Storage temperature

-40°F to 185°F (-40°C to 85°C)

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services  for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.


 

 

 

Summary of Changes

Date

Version History

Action

Description of Change:

01-Dec-2015

From Version 14 to 15

Changed

Overview and Technical Specifications updated

01-Dec-2014

From Version 13 to 14

Changed

Warranty and support updated

11-Aug-2014

From Version 12 to 13

Changes

Configuration was revised

23-May-2014

From Version 11 to 12

Added

Added two new: JL009A, JL010A

31-Mar-2014

From Version 10 to 11

Changed

Updated the specifications for all 4 sets of models.

Updated Features and Benefits

09-Dec-2013

From Version 9 to 10

Added

Added two new TAA models

 

 

Changed

Updated the specifications for all 4 sets of models.

25-Oct-2013

From Version 7 to 9

Changed

Configuration was revised

Accessories was removed

21-Oct-2013

From Version 6 to 7

Added

HP 425 Wireless 802.11n (AM) AP, HP 425 Wireless 802.11n (AM) 8 Pack AP, HP 425 Wireless 802.11n (WW) AP, HP 425 Wireless 802.11n (WW) 8 Pack AP, HP 425 Wireless 802.11n (JP) AP, and HP 425 Wireless 802.11n (JP) 8 Pack AP were added to Build to Order

HP Gigabit IntelliJack 48V Power Supply was added to External Power Supplies

HP Indoor Omni 2.5/6dBi MMO 4 Elmnt Ant was added to External Antenna

22-May-2013

From Version 5 to 6

Changed

Updated Configuration section.

13-May-2013

From Version 4 to 5

Removed

Technical Specifications: Removed J9654A, J9655A, and J9656A references.

Accessories: Removed J9656A, J9659A, J9171A, J9169A and J9170A references.

 

 

Changed

Overview: Updated Features and benefits, and Build to Order section.

25-Mar-2013

From Version 3 to 4

Added

Overview: Added Build to Order to the Features and benefits section.

 

 

Removed

Overview: Removed Models section completely

Completely removed the Accessories section

08-Nov-2011

From Version 2 to 3

Changed

Changes were made throughout, including changing the title.

17-May-2011

From Version 1 to 2

Changed

Radio Characteristics were revised.

 

 

 

 

Sign up for updates

Rate this document

 

 

 

© Copyright 2015 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.

To learn more, visit: http://www.hp.com/networking

Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Microsoft is a U.S. registered trademark of Microsoft Corporation.

c04111561 - 13994 - Worldwide  - V15 - 1-December-2015