HPE MSM-802.11n Access Point Series: технические характеристики и документация

HPE MSM-802.11n Access Point Series

Models

HP MSM410 Access Point (JP)

J9529B

HP MSM410 Access Point (WW)

J9427C

Key features

• Single radio IEEE 802.11 a/b/g/n access point
• Capability to work with wireless controller and in autonomous mode
• Comprehensive WLAN security
• Protection against rogue IEEE 802.11a/b/g/n access points and client
• Indoor enclosure

Product overview

Hewlett Packard Enterprise offers intelligent IEEE 802.11n wireless access points, ranging from our single-radio 802.11a/b/g/n to our dual 802.11a/b/g/n access points. The MSM access points are advanced wireless devices that provide consistent, easy-to-manage connectivity that expands your existing network. The access points maintain your network without interruption and reduce bottlenecks and network complexity by determining where data needs to go throughout the network. The MSM access points provide complete wireless coverage for greater reliability and connectivity and can be used in managed mode as well as autonomous mode without a controller. 

Working in unison with HPE MSM controllers, the HPE MSM-802.11n Access Point Series delivers high-performance networking solutions. The enhanced controller architecture scales to IEEE 802.11n without requiring a controller replacement. The MSM controller provides advanced radio resource management (RRM), including client load balancing and interference mitigation. The MSM wireless controllers support a fast-roaming capability, a feature that is especially for VoIP communications. 

Wireless security is comprehensive with integrated Wireless IDS and support for internal and external authentication, authorization, and accounting (AAA) servers; built-in stateful firewall; per-user VLAN mapping; and authentication.

Features and benefits

Management

• Wi-Fi Clear Connect
  provides a system-wide approach to improve WLAN reliability by proactively determining and adjusting to changing RF conditions; helps optimize WLAN performance by identifying rogue activity and making decisions at a system-wide level
• Advanced radio resource management

- Automatic radio power adjustments
include real-time power adjustments based on changing environmental conditions and signal coverage adjustment

- Automatic radio channel
provides intelligent channel switching and real-time Interference detection

- Intelligent client load balancing
determines number of clients across neighboring APs and adjusts client allocation to balance the load

- Airtime fairness
provides equal RF transmission time for wireless clients

• Integrated IDS (Premium Mobility version required)

- detects and locates unknown and rogue devices

• Access point management
  provides secure Web browser (SSL, VPN), command-line interface, SNMP v2c, SNMP v3, MIB-II with traps, and RADIUS Authentication Client MIB (RFC 2618); offers embedded HTML management tool with secure access (SSL and VPN); implements scheduled configuration and firmware upgrades from a central controller
• HPE Intelligent Management Center and Wireless Services Manager Software
  provides central management for discovery, logging, status, and configuration management
• Diagnostics
  client event log records association, authentication, and DHCP events; packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format); data rate matrix
• Enhanced AP survivability
  continues to operate using the old IP address while the AP searches for a new controller

Quality of Service (QoS)

• Rate limiting
  supports per-wireless client ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums
• Centralized traffic
  Layer 2 and Layer 3 QoS settings are maintained when using Mobility Traffic Manager or guest access
• IEEE 802.1p prioritization
  delivers data to devices based on the priority and type of traffic
• Wireless

- L2/L3/L4 classification
IEEE 802.1p VLAN priority, SpectraLink SVP, and DiffServ

- Assigned by VSC
Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware priority

- Maximum VoIP call capacity
12 active calls on IEEE 802.11 a/b/g/n

• SpectraLink Voice Priority (SVP) support
  prioritizes SpectraLink voice IP packets sent from a SpectraLink NetLink SVP server to SpectraLink wireless voice handsets to help ensure excellent voice quality

Connectivity

• IEEE 802.3af Power over Ethernet (PoE) support
  simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
• Auto-MDIX
  automatically adjusts for straight-through or crossover cables on all 10/100 ports

Mobility

• Anywhere, anytime wireless coverage
  includes a single radio IEEE 802.11a/b/g/n access point; per-radio software-selectable configuration of frequency bands; self-healing, self-optimizing local mesh that extends network availability; Wi-Fi Alliance Certification for interoperability with all IEEE 802.11a/b/g/n client devices; and IEEE 802.3af PoE
• Medical standards
  meets the European EN60601-1-2 standard for healthcare
• Interoperability
  Wi-Fi Alliance Certifications, including IEEE 802.11g Wi-Fi and WPA2, to help ensure multivendor interoperability
• Virtual Service Communities (VSCs)
  includes up to 16 SSIDs, each with unique MAC address and configurable SSID broadcasts; individual security and QoS profiles per VSC; configurable DTIM and minimum data rate per VSC; VSCs that can be mapped to separate IEEE 802.1Q VLANs; WMM and/or WMM-PS; a security filter; and an IP filter
• AP client access control functions

- IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP

- MAC address authentication using local or RADIUS access lists

- RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2

- RADIUS Client (RFC 2865 and 2866) with location-aware support

- Layer 2 wireless client isolation

Security

• Integrated IDS support (Premium Mobility version required)
• Automated AP and client classification
  reduces manual effort (administrator can override AP classification)
• Comprehensive detection capabilities
  detects a wide range of attacks
• Flexible event reporting
  enables configuration of which events will result in notifications
• Location tracking capabilities
  helps identify the location of the rogue device
• Flexible deployment models
  supports time slicing or dedicating a radio to detect fulltime
• IEEE 802.1X support
  provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5, TLS, TTLS, and PEAP with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic between authenticated clients and the access point
• Choice of IEEE 802.11i, WPA2, or WPA
  locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic
• TKIP/WEP encryption
  is supported only on legacy IEEE 802.11a/b/g clients as it has been deprecated from the IEEE 802.11n standard
• Local wireless bridge client traffic filtering
  when enabled, prevents communication between wireless devices associated with the same access point

Additional information

• RFC support
  refer to the "Mobility Specification Sheet" for a list of RFCs and other industry standards supported by the MSM solution at http://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=4AA5-5461ENW&cc=en&lc=en

Warranty and support

• Limited Lifetime Warranty v2.0
  See http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
• Software releases
  to find software for your product, refer to http://www.hpe.com/networking/support for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary

Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

HP MSM410 Access Point (US)

J9426B

• 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:1

HP MSM410 Access Point (WW)

J9427C

• 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:2

HP MSM410 Access Point (JP)

J9529B

• 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:4

HP MSM410 Single Radio 802.11n AP (IL)

J9616A

• 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE:3

Configuration Rules:

Note 1

Only available in US. (Warning in Clic only)

Note 2

Not available US and Israel. (Warning in Clic only)

Note 3

Only available in Israel. (Warning in Clic only)

Note 4

Only available in Japan. (Warning in Clic only)

Access Point Options

HP 1-port Power Injector

J9407B

• Not Racked

See Configuration NOTE:1

Configuration Rules:

Note 1

Localization required. (See Localization Menu)

HP MSM410 Access Point (JP) (J9529B)
HP MSM410 Access Point (WW) (J9427C)

Ports

1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

1 RJ-45 serial console port

AP characteristics

Radios

Single (a/b/g/n)

Radio operation modes

Client access, Local mesh, Packet capture

AP operation modes

Autonomous and controlled

Wi-Fi Alliance Certification

a/b/g/n Wi-Fi Certified

Physical characteristics

Dimensions

5.19(w) x 6.16(d) x 1.94(h) in (13.17 x 15.64 x 4.94 cm)

Weight

0.72 lb (0.33 kg) mounting bracket

Enclosure

Indoor, plenum rated

Memory and processor

Processor

Single core @ 384 MHz, 128 MB flash, 256 MB SDRAM

Mounting

Includes two mounting clips

Environment

Operating temperature

32°F to 122°F (0°C to 50°C)

Operating relative humidity

5% to 95%, noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Electrical characteristics

Description

IEEE 802.3af PoE compliant for Gigabit Ethernet

Maximum power rating

8 W

Antenna

(3) Integrated, dual-band 2.4/5 GHz omnidirectional antennas

Number of internal antennas

3

Frequency band and Operating channels

FCC

2.412 - 2.462 GHz (1 - 11 channels)
5.180 - 5.240 GHz (36 - 48 channels)
5.260 - 5.320 GHz (52 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 120, 124 and 128) channels)
5.745 - 5.825 GHz (149 - 165 channels)

European Union

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.240 GHz (36 - 48 channels)

Rest of World (Actual channels designated by selecting country in UI)

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.240 GHz (36 - 48 channels)
5.260 - 5.320 GHz (52 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)
5.745 - 5.825 GHz (149 - 165 channels)

Taiwan

2.412 - 2.462 GHz (1 - 11 channels)
5.280 - 5.320 GHz (56 - 64 channels)
5.745 - 5.825 GHz (149 - 165 channels)

Japan

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.240 GHz (36 - 48 channels)
5.260 - 5.320 GHz (52 - 64 channels)

Israel

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.240 GHz (36 - 48 channels)
5.260 - 5.320 GHz (52 - 64 channels)

European Union (J9427B)

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.240 GHz (36 - 64 channels)
5.260 - 5.320 GHz (52 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)

Radio

FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; ARIB STD-T66; IDA Registration (Singapore); RCR STD-33; ARIB STD-T71 (Japan); EN 301 893 (EU); KCC
approval (Korea)

Safety

UL 2043; UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Medical

EN60601-1-2

RF Exposure

FCC Bulletin OET-65C; RSS-102; CFR 47, Part 2, Subpart J; ANSI/IEEE C95.1 (99); Ministry of Health Safety Code 6; Australian Radiation Protection Std.

Features

Single radio: IEEE 802.11n for high-throughput applications and IEEE 802.11a/b/g for legacy support
- Integrated antennas for both IEEE 802.11a/b/g (diversity) and 802.11n (3x3 MIMO)
- Will operate the radio at full power on IEEE 802.3af PoE for Gigabit Ethernet

Emissions

EN 55022 Class B, EN 301 489-1, EN 301 489-17, ICES-003 Class B, FCC Part 15, Class B

Notes

Maximum transmit power varies by country.

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

NOTE: These radio characteristics apply to all the products in this series.

IEEE 802.11n 5 GHz @ 20 MHz

Data rate

MCS0/MCS8 Mbps

MCS7/MCS15 Mbps

Receiver sensitivity

-95 dBm

-77 dBm

Transmit power

18 dBm

10 dBm

IEEE 802.11n 5 GHz @ 40 MHz

Data rate

MCS0/MCS8 Mbps

MCS7/MCS15 Mbps

Receiver sensitivity

-92 dBm

-74 dBm

Transmit power

17 dBm

10 dBm

IEEE 802.11n 2.4 GHz @ 20 MHz

Data rate

MCS0/MCS8 Mbps

MCS7/MCS15 Mbps

Receiver sensitivity

-96 dBm

-79 dBm

Transmit power

19 dBm

10 dBm

IEEE 802.11n 2.4 GHz @ 40 MHz

Data rate

MCS0/MCS8 Mbps

MCS7/MCS15 Mbps

Receiver sensitivity

-91 dBm

-75 dBm

Transmit power

17 dBm

10 dBm

IEEE 802.11a

Data rate

6 Mbps

54 Mbps

Receiver sensitivity

-95 dBm

-82 dBm

Transmit power

18 dBm

12 dBm

IEEE 802.11b

Data rate

1 Mbps

11 Mbps

Receiver sensitivity

-96 dBm

-92 dBm

Transmit power

18.5 dBm

18.5 dBm

IEEE 802.11g

Data rate

6 Mbps

54 Mbps

Receiver sensitivity

-96 dBm

-83 dBm

Transmit power

18 dBm

13 dBm

Standards and protocols
(applies to all products in series)

Mobility
IEEE 802.11a High Speed Physical Layer in the 5 GHz Band

IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band

IEEE 802.11d Global Harmonization

IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band

IEEE 802.11i Medium Access Control (MAC) Security Enhancements

IEEE 802.11n WLAN Enhancements for Higher Throughput

MCS Index

800 nS Guard Interval

400 nS Guard Interval

20 MHz Rate (Mbps)

40 MHz Rate (Mbps)

20 MHz Rate (Mbps)

40 MHz Rate (Mbps)

0

6.5

13.5

7.2

15

1

13

27

14.4

30

2

19.5

40.5

21.7

45

3

26

54

28.9

60

4

39

81

43.3

90

5

52

108

57.8

120

6

58.5

121.5

65

135

7

65

135

72.2

157.5

8

13

27

14.4

30

9

26

54

28.9

60

10

39

81

43.3

90

11

52

108

57.8

120

12

78

162

86.7

180

13

104

216

115.6

240

14

117

243

130

270

15

130

270

144.4

300

HPE MSM-802.11n Access Point Series accessories

Power Supply

HP 1-port Power Injector

J9407B

HP 1-port Power Injector (J9407B)

Physical characteristics

Dimensions

5.71(d) x 2.36(w) x 1.22(h) in. (14.5 x 6 x 3.1 cm)

Weight

1 lb. (0.45 kg)

Environment

Operating temperature

32°F to 104°F (0°C to 40°C)

Operating relative humidity

5% to 93%, noncondensing

Nonoperating/Storage temperature

-4°F to 158°F (-20°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Altitude

up to 10,000 ft. (3 km)

Electrical characteristics

Voltage

100-240 VAC

Current

0.3/0.2 A

Frequency

50/60 Hz

Notes

IEEE 802.3af compliant

Safety

UL 60950; EN 60950

Emissions

EN 55024; EN 55022 (CISPR 22) Class B with FTP Cabling; FCC Part 15, Class B with FTP cabling

Notes

The 1-port power converter has 1 AC power cord input, 1 RJ-45 10/100/1000 Mbps port for data coming from the network infrastructure, and 1 RJ-45 for data plus IEEE 802.3af-compliant PoE for Gigabit Ethernet to power the access point.

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

Date

Version History

Action

Description of Change

27-May-2016

From Version 12 to 13

Changed

Updates made on Overview and F&B
Product description updated.

13-Mar-2015

From Version 11 to 12

Changed

Added note SKUs J9616A and J9426B will be EOL 3/31/15

01-Dec-2014

From Version 10 to 11

Changed

Warranty and support updated

16-Oct-2014

From Version 9 to 10

Removed

Removed optional external antennas from the Configuration

20-Dec-2013

From Version 8 to 9

Changed

External Power Supplies were revised in Configuration.

21-Oct-2013

From Version 7 to 8

Changed

Warranty and Support was revised in Features and benefits.

Configuration was added.

12-Jul-2013

From Version 6 to 7

Changed

Wi-Fi Clear Connect was revised in Features and Benefits.

25-Mar-2013

From Version 5 to 6

Changed

Updates were made throughout the document, including updated the dimensions and weight in Technical Specifications, the models, Introduction statement, and Features and Benefits.

04-Dec-2012

From Version 4 to 5

Changed

Changes were made to Features and Benefits and the Radio specifications.

27-Sep-2012

From Version 3 to 4

Changed

Changes were made to Accessories and Features and Benefits.

01-Nov-2011

From Version 2 to 3

Added

Accessory Product Details was added.