HPE 425 802.11n Dual Radio Access Point Series: технические характеристики и документация

HPE 425 802.11n Dual Radio Access Point Series

Models

HP 425 Wireless Dual Radio 802.11n (AM) Access Point

JG653A

HP 425 Wireless Dual Radio 802.11n (WW) Access Point

JG654A

HP 425 Wireless Dual Radio 802.11n (JP) Access Point

JG655A

HP 425 Wireless Dual Radio 802.11n (IL) Access Point

JG656A

HP 425 Wireless Dual Radio 802.11n (AM) 8 unit Eco-pack Access Points

JG687A

HP 425 Wireless Dual Radio 802.11n (WW) 8 unit Eco-pack Access Points

JG688A

Key features

• Dual radio—two spatial stream access supporting 300 Mb/s per radio
• Supports embedded antennas as well as an optional external antenna
• Powered via IEEE 802.3af PoE or local power supply
• Comprehensive WLAN security
• Limited Lifetime Warranty

Introduction

The HPE 425 802.11n Dual Radio Access Point Series, designed to work in sync with HPE controllers, delivers high-performance networking solutions. The enhanced controller architecture scales to IEEE 802.11n—without requiring a controller replacement. The controllers provide advanced radio resource management (RRM), including client load balancing and interference mitigation. And the wireless controllers support a fast-roaming capability—an important feature, especially for VoIP communications.

The 425 Access Points work in a managed mode with HPE wireless LAN controllers. The access points (APs) provide RF spectrum analysis with detection and classification of non-IEEE 802.11 interference; and they have the ability to automatically resist interference. Wireless security is comprehensive with integrated wireless IDS (Intrusion Detection System) and support for internal and external authentication, authorization, and accounting (AAA) servers; built-in stateful firewalls; per-user VLAN mapping; and authentication.

Features and benefits

Management

• Wi-Fi Clear Connect
  provides a system-wide approach to improving WLAN reliability by proactively determining and adjusting to changing RF conditions; helps optimize WLAN performance by detecting interference from Wi-Fi and non-Wi-Fi sources using spectrum analysis capabilities built into the access points, identifying rogue activity, and making decisions at a system-wide level
• Advanced radio resource management
  • Automatic radio power adjustments
    include real-time power adjustments based on changing environmental conditions and signal coverage adjustment
  • Automatic radio channel
    provides intelligent channel switching and real-time Interference detection
  • Intelligent client load balancing
    determines number of clients across neighboring APs and adjusts
    client allocation to balance the load
  • Airtime fairness
    provides equal RF transmission time for wireless clients
• Spectrum analysis
  • Power/frequency spectrum analysis
    measures noise from IEEE 802.11 remote sources
  • Signal detection/classification
    identifies source of RF interference, for example, Bluetooth®, cordless phones, and microwave ovens
  • Evaluation of channel quality
    helps detect severe channel degradation and improves the reporting of poor RF performance
• Integrated IDS
  detects and locates unknown and rogue devices (see controller data sheet for details)
• Access point management
  provides secure Web browser (SSL and VPN), command-line interface, SNMP v2c, SNMP v3, MIB-II with traps, and RADIUS
  Authentication Client MIB (RFC 2618); offers embedded HTML management tool with secure access (SSL and VPN); implements scheduled configuration and firmware upgrades from a central controller
• HPE Intelligent Management Center and Wireless Services Manager Software
  Provide centralized discovery, logging, status, and configuration management
• Diagnostics
  records association, authentication, and DHCP events in client event log; packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format); includes data rate matrix
• Enhanced AP survivability
  continues to operate using the old IP address while the AP searches for a new controller
• Compatible with HPE controllers and Unified switches and modules
  • Refer to the HPE Access Point—Controller Compatibility Matrix at h20195.www2.hpe.com/V2/GetDocument.aspx?docname=4AA5-0345ENW&cc=us&lc=en
  • Refer to the release notes for minimum version numbers

Quality of Service (QoS)

• Rate limiting
  supports per-wireless client ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums
• Centralized traffic
  maintains Layer 2 and Layer 3 QoS settings when using centralized traffic or guest access
• IEEE 802.1p prioritization
  delivers data to devices based on the priority and type of traffic
• Wireless
  • L2/L3/L4 classification
    IEEE 802.1p VLAN priority, SpectraLink SVP, and DiffServ
  • Virtual Service Community (VSC)
    assign Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware priority
  • VoIP call capacity
    supports 12 active calls per radio, maximum
• SpectraLink Voice Priority (SVP) support
  prioritizes SpectraLink voice IP packets sent from a SpectraLink NetLink SVP server to SpectraLink wireless voice handsets to help ensure excellent voice quality

Connectivity

• IEEE 802.3af Power over Ethernet (PoE) support
  simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
• Local power option
  offers 48V DC power connector for use with an optional power supply when PoE is not available
• Auto-MDIX
  adjusts automatically for straight-through or crossover cables on the Ethernet interface
• Console port
  aids problem resolution

Mobility

• Bandsteering
  redirects 5 GHz-capable clients automatically to the less-congested 5 GHz spectrum
• HPE 425 Antenna
  • Embedded antenna
    provides excellent coverage through use of embedded high-gain antennas (4 dBi antenna at 2.4 GHz and 5 dBi antenna at 5 GHz); no need for the added cost of external antennas
  • Optional external antenna
    includes four indoor RP-SMA connectors for use with optional external antennas
• Anywhere, anytime wireless coverage
  dual-radio IEEE 802.11b/g/n and 802.11a/n access point; per-radio software-selectable configuration of frequency bands; self-healing, self-optimizing local mesh that extends network availability; Wi-Fi Alliance Certifications for interoperability with all IEEE 802.11a/b/g/n client devices; and IEEE 802.3af PoE
• Medical standards
  meets the European EN60601-1-2 standard for healthcare
• Virtual Service Communities (VSCs)
  includes up to 16 SSIDs per radio, each with unique MAC address and configurable SSID broadcasts; individual security and QoS profiles per VSC; configurable DTIM and minimum data rate per VSC; VSCs that can be mapped to separate IEEE 802.1Q VLANs; WMM and/or WMM-PS; a security filter; and an IP filter
• AP client access control functions
  • offers IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP
  • delivers MAC address authentication using local or RADIUS access lists
  • provides RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2
  • supports RADIUS Client (RFC 2865 and 2866) with location-aware support
  • provides Layer 2 wireless client isolation

Security

• Integrated IDS support
  • Automated AP and client classification
    reduces manual effort (administrator can override AP classification)
  • Comprehensive detection capabilities
    detects a wide range of attacks
  • Flexible event reporting
    enables configuration of which events will result in notifications
  • Location tracking capabilities
    helps identify the rogue device location
  • Flexible deployment models
    supports time slicing or dedicating a radio to detect full-time (see the controller datasheet for details)
• IEEE 802.1X support
  provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5, TLS, TTLS, and PEAP with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic between authenticated clients and the access point
• Choice of IEEE 802.11i, WPA2, or WPA
  locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic
• TKIP/WEP encryption
  is supported only on legacy IEEE 802.11a/b/g clients as it has been deprecated from the IEEE 802.11n standard
• Local wireless bridge client traffic filtering
  prevents communication between wireless devices associated with the same access point

Additional information

• RFC support
  refer to the "Mobility Specification Sheet" for a list of RFCs and other industry standards supported by the MSM solution at
  http://h17007.www1.hp.com/docs/mobility/4AA3-3883ENW.pdf

Warranty and support

• Limited Lifetime Warranty v2.0
  See http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
• Software releases

to find software for your product, refer to http://www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary

Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

BTO Models

HP 425 Wireless Dual Radio 802.11n (AM) Access Point

JG653A

• 1 RJ-45 autosensing 10/100/1000 port

HP 425 Wireless Dual Radio 802.11n (AM) 8 unit Eco-pack Access Points

JG687A

• 1 RJ-45 autosensing 10/100/1000 port (Each)

HP 425 Wireless Dual Radio 802.11n (WW) Access Point

JG654A

• 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE: 2

HP 425 Wireless Dual Radio 802.11n (WW) 8 unit Eco-pack Access Points

JG688A

• 1 RJ-45 autosensing 10/100/1000 port (Each)

See Configuration NOTE: 2

HP 425 Wireless Dual Radio 802.11n (JP) Access Point

JG655A

• 1 RJ-45 autosensing 10/100/1000 port

HP 425 Wireless Dual Radio 802.11n (IL) Access Point

JG656A

• 1 RJ-45 autosensing 10/100/1000 port

See Configuration NOTE: 3

Configuration Rules:

Note 2

Not available Israel. (Warning in Clic only)

Note 3

Only available in Israel. (Warning in Clic only)

Access Point Options

External Power Supplies

HP 1-port Power Injector

J9407B

See Configuration NOTE: 1, 2

HPE Gigabit Intellijack 48V Power Supply

JD055B

See Configuration NOTE: 1, 2

HP Single-Port 802.3at Gigabit PoE In-Line Power Supply

J9867A

See Configuration NOTE: 2, 3

Configuration Rules:

Note 1

This power supply is supported on the following Access Points:

HP 425 Wireless Dual Radio 802.11n (AM) Access Point

JG653A

HP 425 Wireless Dual Radio 802.11n (AM) 8 unit Eco-pack Access Points

JG687A

HP 425 Wireless Dual Radio 802.11n (WW) Access Point

JG654A

HP 425 Wireless Dual Radio 802.11n (WW) 8 unit Eco-pack Access Points

JG688A

HP 425 Wireless Dual Radio 802.11n (JP) Access Point

JG655A

HP 425 Wireless Dual Radio 802.11n (IL) Access Point

JG656A

Note 2

Localization required. (See Localization Menu)

Note 3

This power supply is supported on the following Access Points:

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (AM)

J9715A

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (WW)

J9716A

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (JP)

J9717A

External Antenna

HP Indoor Omnidirectional Dual Band 2.5/6dBi MIMO 6 Element Antenna

J9659A

See Configuration NOTE: 1

HP Indoor Omnidirectional Dual Band 3/4dBi MIMO 3 Element Antenna

J9171A

See Configuration NOTE: 1

HP Indoor-Outdoor Narrow Sector Dual Band 8/10dBi MIMO 3 Element Antenna

J9169A

See Configuration NOTE: 1, 4

HP Indoor-Outdoor Point-to-Point Dual Band 10/13dBi MIMO 3 Element Antenna

J9170A

See Configuration NOTE: 1, 4

HP Antenna Lightning Arrester

J8996A

See Configuration NOTE: 1

HP Outdoor Omnidirectional 6dBi at 2.4GHz MIMO 3 Element Antenna

J9719A

See Configuration NOTE: 2, 3

HP Outdoor Omnidirectional 8dBi at 5GHz MIMO 3 Element Antenna

J9720A

See Configuration NOTE: 2, 3

HP Indoor Omnidirectional Dual Band 2.5/6dBi MIMO 4 Element Antenna

JG696A

See Configuration NOTE: 5

Configuration Rules:

Note 1

This Antenna is supported on the following Access Points:

HP MSM466 Dual Radio 802.11n Access Point (JP)

J9620A

HP MSM466 Dual Radio 802.11n Access Point (AM)

J9621A

HP MSM466 Dual Radio 802.11n Access Point (WW)

J9622A

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (AM)

J9715A

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (WW)

J9716A

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (JP)

J9717A

HP MSM466 Dual Radio 802.11n Access Point (IL)

J9619A

Note 2

This Antenna is supported on the following Access Points:

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (AM)

J9715A

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (WW)

J9716A

HP MSM466-R Dual Radio Outdoor 802.11n Access Point (JP)

J9717A

Note 3

If this Antenna is selected, then THREE of the following Lightning Arresters per sku ordered is required:

HP Antenna Lightning Arrester

J8996A

Note 4

If this Antenna is selected, then THREE of the following Lightning Arresters per sku ordered is required for Outdoor use (Not required if the antenna is used indoors):

HP Antenna Lightning Arrester

J8996A

Note 5

This Antenna is supported on the following Access Points:

HP 425 Wireless Dual Radio 802.11n (AM) Access Point

JG653A

HP 425 Wireless Dual Radio 802.11n (AM) 8 unit Eco-pack Access Points

JG687A

HP 425 Wireless Dual Radio 802.11n (WW) Access Point

JG654A

HP 425 Wireless Dual Radio 802.11n (WW) 8 unit Eco-pack Access Points

JG688A

HP 425 Wireless Dual Radio 802.11n (JP) Access Point

JG655A

HP 425 Wireless Dual Radio 802.11n (IL) Access Point

JG656A

Remarks

If you plan on connecting an outdoor antenna to the unit make sure that proper lightning surge protection and grounding precautions are taken according to local electrical code.

HP 425 Wireless Dual Radio 802.11n (AM) Access Point (JG653A)
HP 425 Wireless Dual Radio 802.11n (WW) Access Point (JG654A)
HP 425 Wireless Dual Radio 802.11n (JP) Access Point (JG655A)
HP 425 Wireless Dual Radio 802.11n (IL) Access Point (JG656A)
HP 425 Wireless Dual Radio 802.11n (AM) 8 unit Eco-pack Access Points (JG687A)
HP 425 Wireless Dual Radio 802.11n (WW) 8 unit Eco-pack Access Points (JG688A)

Ports

1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
1 RJ-45 serial console port

AP characteristics

Radios (built-in)

802.11 a/n, b/g/n

Radio operation modes

Client access, Local mesh, Packet capture

AP operation modes

Controlled

Wi-Fi Alliance Certification

a/b/g/n Wi-Fi Certified

Antenna

(2) 4 dBi 2.4 GHz and (2) 5 dBi 5 GHz omnidirectional antennas

Number of internal antennas

4

Number of external antennas

4

Physical characteristics

Dimensions

7.43(w) x 7.43(d) x 2(h) in (18.86 x 18.86 x 5.08 cm)

Weight

1.65 lb (.75 kg) mounting bracket

Memory and processor

Single core @ 560 MHz, 128 MB flash, 128 MB SDRAM

Mounting and enclosure

Indoor, plenum rated;Includes ceiling/wall mount kei as well as two ceiling mounting

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

5% to 95%, noncondensing

Non-operating/
Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/
Storage relative humidity

5% to 95%, noncondensing

Electrical characteristics

Description

IEEE 802.3af PoE compliant for Gigabit Ethernet

Maximum power rating

12.9 W

Frequency band and Operating channels

Americas

2.412 - 2.462 GHz (1 - 11 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5670 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)

European Union

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)

Rest of World (Actual channels designated by selecting country in UI)

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)
5.745 - 5.825 GHz (149 - 165 channels)

Taiwan

2.412 - 2.462 GHz (1 - 11 channels)
5.280 - 5.320 GHz (56 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-5670 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)

Japan

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)

Israel

2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)

Radio

FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; ARIB STD-T66; IDA Registration (Singapore); RCR STD-33; ARIB STD-T71 (Japan); EN 301 893 (EU); KCC approval (Korea)

Safety

UL 2043; UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Medical

EN60601-1-2

RF Exposure

FCC Bulletin OET-65C; RSS-102; CFR 47, Part 2, Subpart J; ANSI/IEEE C95.1 (99); Ministry of Health Safety Code 6; Australian Radiation Protection Std.

Features

Dual radio: IEEE 802.11a/n for high-throughput applications and IEEE 802.11b/g/n for legacy support applications
- Integrated antennas for both IEEE radios, supporting two spatial streams and 2x2 MIMO
- Four embedded antennas
- Both radios operate at full power and full performance on IEEE 802.3af PoE/Gigabit Ethernet
- External antenna, optional

Emissions

EN 55022 Class B; EN 301 489-1; EN 301 489-17; ICES-003 Class B; FCC Part 15, Class B

Notes

The HPE 425 access point power information listed excludes the embedded antenna. Review the HP documentation for your AP to understand the maximum output setting for your AP based on your country's regulations.
Two spatial stream AP, supporting 300 Mb/s per radio.
Maximum transmit power varies by country.
Regulatory model number: BJNGA-FB0002

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

Radio characteristics

NOTE: These radio characteristics apply to the HPE 425 access points, including the embedded antenna. Power is limited based on country of operation.

IEEE 802.11n 5 GHz @ 40 MHz channel

Data rate

MCS0, MCS8
30 Mbps

MCS7, MCS15
300 Mbps

Receiver sensitivity

-92 dBm

-70 dBm

Transmit power

25 dBm

20 dBm

IEEE 802.11n 5 GHz @ 20 MHz channel

Data rate

MCS0, MCS8
14.4 Mbps

MCS7, MCS15
144.4 Mbps

Receiver sensitivity

-95 dBm

-73 dBm

Transmit power

25 dBm

20 dBm

IEEE 802.11n 2.4 GHz @ 40 MHz channel

Data rate

MCS0, MCS8
30 Mbps

MCS7, MCS15
300 Mbps

Receiver sensitivity

-93 dBm

-73 dBm

Transmit power

24 dBm

22 dBm

IEEE 802.11n 2.4 GHz @ 20 MHz channel

Data rate

MCS0, MCS8
14.4 Mbps

MCS7, MCS15
144.4 Mbps

Receiver sensitivity

-96 dBm

-76 dBm

Transmit power

24 dBm

22 dBm

IEEE 802.11a 5 GHz

Data rate

6 Mbps

54 Mbps

Receiver sensitivity

-95 dBm

-76 dBm

Transmit power

25 dBm

22 dBm

IEEE 802.11b/g 2.4 GHz

Data rate

1 Mbps

11 Mbps

6 Mbps

54 Mbps

Receiver sensitivity

-99 dBm

-93 dBm

-96 dBm

-79 dBm

Transmit power

25 dBm

25 dBm

25 dBm

23 dBm

MCS Index

800 nS Guard Interval

400 nS Guard Interval

20 MHz Rate (Mbps)

40 MHz Rate (Mbps)

20 MHz Rate (Mbps)

40 MHz Rate (Mbps)

0

6.5

13.5

7.2

15

1

13

27

14.4

30

2

19.5

40.5

21.7

45

3

26

54

28.9

60

4

39

81

43.3

90

5

52

108

57.8

120

6

58.5

121.5

65

135

7

65

135

72.2

150

8

13

27

14.4

30

9

26

54

28.9

60

10

39

81

43.3

90

11

52

108

57.8

120

12

78

162

86.7

180

13

104

216

115.6

240

14

117

243

130

270

15

130

270

144.4

300

Standards and Protocols
(applies to all products in series)

Mobility
IEEE 802.11a High Speed Physical Layer in the 5 GHz Band
IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band
IEEE 802.11h Dynamic Frequency Selection
IEEE 802.11d Global Harmonization
IEEE 802.11i Medium Access Control (MAC) Security Enhancements
IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band

HPE 425 802.11n Dual Radio Access Point Series accessories

Power Supply

HP 1-port Power Injector

J9407B

HPE Gigabit Intellijack 48V Power Supply

JD055B

Date

Version History

Action

Description of Change:

08-Apr-2016

From Version 7 to 8

Changed

Configuration section fixed, SKUs descriptions updated.

01-Dec-2015

From Version 6 to 7

Changed

Overview and Technical Specifications updated

01-Dec-2014

From Version 5 to 6

Changed

Warranty and support updated

31-Mar-2014

From Version 4 to 5

Changed

Transceivers were revised.

20-Dec-2013

From Version 2 to 4

Changed

External Power Supplies was revised.

25-Oct-2013

From Version 1 to 2

Changed

Configuration was added

Accessories were removed