HPE Smart Array S100i Software RAID: технические характеристики и документация
|
Have feedback on QuickSpecs? We're listening | |
|
HPE Smart Array S100i SR Gen10 Software RAID QuickSpecs
The HPE Smart Array S100i SR Gen10 provides embedded, entry-level SATA RAID for ProLiant Gen10 servers, delivering essential performance and data protection. HPE Smart Array S100i SR Gen10 Software RAID, supporting 6Gb/s SATA, is an ideal entry-level solution for supporting RAID 0, 1, 5, and 10. Smart Array Software (SW) RAID is a driver-based solution that enables RAID on up to 14 SATA drives connected to the embedded SATA ports on the system board. This software RAID solution is available for HPE ProLiant Gen10 servers and HPE Synergy Gen10 compute modules and provides the efficiency needed to address your evolving data storage needs. HPE Smart Array S100i SR Gen10 SW RAID is only supported on Windows. |
|
|
Key Features - Storage interface (SATA)
- RAID 0, 1, 5, and 10 - UEFI System Utilities (storage configuration) - Up to 14 physical drives - Up to 14 logical drives - Seamless upgrades to HPE Smart Array controllers |
|
|
|
Ports - Internal: Up to 14 SATA lanes (dependent on server) |
|
|
|
Performance - 6Gb/s SATA (600 MB/s theoretical bandwidth per physical lane) - PCI Express 3.0 x4 link width
|
|
|
|
Fault Prevention The following features offer detection of possible failures before they occur: - Predictive drive failure detects possible drive failure before it occurs, allowing replacement of the component before failure occurs. - Background surface scan checks drives during inactive periods and automatically remaps bad sectors, ensuring data integrity. - HPE SmartSSD Wear Gauge reports the amount of lifetime remaining on your SSDs. |
|
|
|
Storage Management Software Suite HPE Smart Storage Administrator (SSA) GUI HPE Smart Storage Administrator (SSA) CLI HPE Smart Storage Administrator (SSA) Scripting HPE Intelligent Provisioning UEFI System Utilities (storage configuration) Notes: For additional information see the HPE Smart Array SR Gen10 Configuration Guide at: http://www.hpe.com/info/SmartArrayGen10-docs. |
|
|
|
Server Compatibility HPE Smart Array S100i SR Gen10 Software RAID is offered on all ProLiant Gen10 servers and Synergy Gen10 compute modules. HPE Smart Array S100i SR Gen10 Software RAID is not supported with any MR Storage Controllers. |
|
|
|
Operating Systems Microsoft Windows Server Microsoft Windows Hyper-V Server Notes: S100i Software RAID only supports Windows. For Linux users, HPE offers a solution that uses in-distro open-source software to create a two-disk RAID 1 boot volume. For more information visit: https://downloads.linux.hpe.com/SDR/project/lsrrb/. Notes: Customers using Linux and VMware can use the embedded SATA ports in AHCI mode. In AHCI mode S100i Software RAID is not enabled. Notes: For more information on HPE's server operating systems and virtualization software, please visit: http://www.hpe.com/info/ossupport. |
|
|
|
Date |
Version History |
Action |
Description of Change |
|
20-Jul-2026 |
Version 9 |
Changed |
Service and Support Section was updated. |
|
16-Feb-2026 |
Version 8 |
Changed |
New branding applied to document. |
|
27-May-2025 |
Version 7 |
Changed |
Server compatibility note was added (page 2). |
|
04-Dec-2023 |
Version 6 |
Changed |
Service and Support Section was updated. |
|
15-Nov-2021 |
Version 5 |
Changed |
Service and Support Section was updated. |
|
07-May-2018 |
Version 4 |
Changed |
Updated a note in the Operating Systems section. |
|
12-Feb-2018 |
Version 3 |
Changed |
Updated Service and Support; added note on embedded SATA ports being used in AHCI mode. |
|
04-Dec-2017 |
Version 2 |
Changed |
QuickSpecs name updated. |
|
17-Jul-2017 |
Version 1 |
New |
New QuickSpecs. |
|
|
|
Have feedback on QuickSpecs? We're listening |
|
|
|
|
|
|
|
|
|
Chat now |
|
|
|
|
© Copyright 2026 Hewlett Packard Enterprise Development L.P. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
a00019427enw - 16020 - Worldwide - V9 - 20-July-2026 |
|
|
|
|
HEWLETT PACKARD ENTERPRISE HPE.com |
|
