HPE Metered and Switched Power Distribution Units (PDU): технические характеристики и документация

HPE Metered and Switched Power Distribution Units (PDU)

Looking for a power distribution unit that meets the demands of high temperature operating environments and provides monitoring and switching capabilities? 

The HPE Metered and Switched Power Distribution Unit (PDU) provides both local and remote power management for your IT racks.  An advanced LCD screen provides local monitoring and alert indications, while remote access and configuration are available through secure Web, SNMP, CLI, or Telnet interfaces.  Remote outlet monitoring offers ±1% billing grade accuracy while remote switching capabilities support power on/off functionality to remotely reboot equipment or restrict outlet usage. The PDU features a low-profile, single-piece design that provides multiple mounting options with ease of access to rear devices for maintenance. It is compatible with all HPE Advanced and Enterprise Series racks, as well as with many non-Hewlett Packard Enterprise racks using standard button and keyhole mounting. Multiple options are available supporting vertical/0U configurations with both single and 3-phase models.

Half Height Model (H8B49A shown)

Full Height Model (H8B48A shown)

Full Height Model (H8B50A & H8B51A shown)

Full Height Model (H8B52A shown)

Full Height Model (H8B53A shown)

Full Height Model (H8B54A shown)

Full Height Model (H8B55A & H8B56A shown)

Single Phase, Half Height (22U)

HPE Metered Switched 3.6kVA/60320 C20 Detachable 16A/230V Outlets (7) C13 (1) C19/Vertical WW PDU

H8B49A

Single Phase, Full Height (42U)

HPE Metered Switched 2.8kVA/L5-30P 24A/120V Outlets (24) 5-20R /Vertical NA/JP PDU

H8B48A

HPE Metered Switched 4.9kVA/L6-30P 24A/208V Outlets (20) C13 (4) C19/Vertical NA/JP PDU

H8B50A

HPE Metered Switched 7.3kVA/60309 3-wire 32A/230V Outlets (20) C13 (4) C19/Vertical INTL PDU

H8B51A

Three Phase, Full Height (42U)

HPE Metered Switched 3Ph 8.6kVA/L15-30P 24A/208V Outlets (18) C13 (6) C19/Vertical NA/JP PDU

H8B52A

HPE Metered Switched 3Ph 8.6kVA/L2190-30P 24A/208V Outlets (23) C13 C19 (1) 520R/Vertical NA/JP PDU

H8B53A

HPE Metered Switched 3Ph 11kVA/60309 5-wire 16A/230V Outlets (21) C13 (3) C19/Vertical INTL PDU

H8B54A

HPE Metered Switched 3Ph 14.4kVA/CS8365C 40A/208V Outlets (12) C13 (12) C19/Vertical NA/JP PDU

H8B55A

HPE Metered Switched 3Ph 17.3kVA/60309 4-wire 48A/208V Outlets (12) C13 (12) C19/Vertical NA/JP PDU

H8B56A

Key Features
and Benefits

Local and remote power distribution management with billing grade accuracy

• An advanced LCD screen on HPE Metered and Switched Power Distribution Units (PDU) provides local monitoring and alert indications.
• Remotely access and configure each PDU through secure Web, SNMP, CLI, or Telnet Interfaces with the ability to daisy-chain up to four units to share the same network connection and IP address.
• Remote outlet monitoring within ±1% billing grade accuracy.
• Remote outlet switching provides power on/off capabilities to remotely reboot equipment or restrict outlet usage.
• Supports both Local and LDAP security with multiple access levels to provide enhanced security.

Flexible, simple installation and maintenance

• The HPE Metered and Switched Power Distribution Unit features a low-profile, single-piece design supporting multiple mounting options and ease of access to rear devices for maintenance.
• Each PDU can be installed on either side of the rack with outlets facing the back of the rack for easy access and improved clearance.
• Install PDU units side by side on both sides of the rack with the outlets facing in towards the center of the rack for high density configurations.
• Provides integrated power cord retention on all IEC receptacles that work with standard power cords.
• Add an optional environmental sensor which can measure air temperature and humidity in the front or rear of the rack, sending alerts over the network based on user-defined thresholds.

Compatible With a Wide Range of Hewlett Packard Enterprise and Non-Hewlett Packard Enterprise Rack Solutions

• HPE Metered and Switched Power Distribution Units are designed to provide complete compatibility with HPE Advanced and Intelligent Series racks.
• The PDU is also compatible with a wide range of non-Hewlett Packard Enterprise racks using standard button and keyhole mounting.
• Designed for vertical/0U rack configurations offering both half and full-height form factors.
• Support for a wide range of load capacities, from 2.8kVA to 17.3kVA, with both single and three-phase models.

Billing Grade
Accuracy

All HPE Metered and Switched Power Distribution Units (PDU) meet IEC 62053-21, Class 1 standards for ±1% or better accuracy in power monitoring of:

• Amperage
• Voltage
• Wattage
• Kilowatts per hour

Accurate outlet and load segment power monitoring improves circuit utilization and provide information that can help balance power throughout the data center to maximize efficiency and cooling.

Remote Access
Support

• Easy to use CLI and web interfaces
• Local and LDAP security with multiple access levels
• HTTP, HTTPS, Telnet/SSH protocols
• IPv4 and IPv6 compatible
• SNMPv1 and SNMPv3 compatible
• Email alert notifications
• User settable alert thresholds
• Event logs

Flexible Installation

The HPE Metered and Switched Power Distribution Units (PDU) are available in two form factors supporting a variety of vertical/0U rack configurations. All HPE Metered and Switched Power Distribution Units (PDU) can be mounted to stay completely out of the critical rear maintenance path needed to service IT equipment in the rack. All vertical models use industry standard button and keyhole mounting for simple drop in installation in HPE Advanced and Intelligent Series racks, as well as many non-Hewlett Packard Enterprise racks.

• Mount vertically on either side in the rear of the rack using industry standard button and keyhole mounting.
• Standard mounting faces the outlet towards the rear of the rack. This configuration fully prevents interference in the maintenance zone between rear RETMA rails.
• Using the optional configuration of facing the outlets into the rack, multiple PDUs can be mounted on one side of the rack for higher power density.

NOTE: Facing the outlets into the rack will interfere with the lower few rack U spaces of the rear maintenance zone due to breakers on the PDUs.

PDU Form Factors

• Half Height PDU
  • Designed to fit in 22U and taller racks
  • Up to 4 Half Height PDUs can be mounted on one side of a 42U or 47U rack using the optional inward facing configuration.
• Full Height PDUs
  • Designed for 42U and taller racks.

NOTE: When mounted in the standard rear facing configuration only 1 Full Height PDU can be mounted per side of the rack. Up to 2 Half Height PDUs can be mounted per side in the standard rear facing configuration in a 42U or taller rack.

Environmental monitoring

An optional environmental sensor attaches to the HPE Metered and Switched Power Distribution Units (PDU) and can measure air temperature and humidity in the front or rear of the rack. The environmental sensor will send alerts over the network based on user defined thresholds.

Warranty

HPE Metered and Switched Power Distribution Units (PDU) are backed by a limited 3-year warranty.
HPE Metered and Switched Power Distribution Units (PDU) automatically assume the Foundation Care coverage level of any covered ProLiant server in the same rack.

HPE Support Services

Support services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical.

A full range of Hewlett Packard Enterprise support services for hardware and software are available including:

• Installation and start up
• Education courses
• Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair
• Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMWare-based IT solutions helping to deliver high level of application availability. Response times range from 30 mins for critical problems to 2 hours.
• System Management, Performance Services and Mission Critical Support Solution

NOTE: For more complete information on Hewlett Packard Enterprise Services offerings, customers and resellers, please visit us at: http://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

HPE Environmental
Sensor

HP Environmental Sensor for Remote Monitored and Managed PDUs

E2D53A

• Hot installable and hot swappable
• User selectable alarm thresholds
• Measure temperature from 32˚F to 158˚F (0˚C to 70˚C) with an accuracy of ±3.6˚F (±2˚C)
• Measures relative humidity from 10% to 90% with an accuracy of ±5%
• Supports normally open and normally closed contact devices

NOTE: The HPE Environmental Sensor comes with a 6 foot RJ45-RJ45 cable and can be mounted in various locations within the rack using the supplied Velcro strips or mounting screw. RJ45 cables up to 30 feet (9.1m) long may be used.
NOTE: One environmental sensor may be installed per HPE Metered and Switched PDU.

HPE Country specific
C19 PDU Inlet Cords
(required for H8B49A)

HP C19 - Nema L6-20P NA/JP 250V 20Amp High Voltage 3.6m Power Cord

AF593A

HP C19 - NBR-14136 BR 250V 16Amp 2.5m Power Cord

AF592A

HP C19 - GB-1002 CN 250V 16Amp 2.5m Power Cord

AF584A

HP C19 - IS-1293 IN/PK/BD 250V 16Amp 2.5m Power Cord

AF582A

HP C19 - ISI-32 IL 250V 16Amp 2.5m Power Cord

AF583A

HP C19 - AS3112-3 AU/NZ 250V 15Amp 3.6m Power Cord

AF577A

HP C19 - IEC-309 DK/SE/AR 250V 16Amp 3.6m Power Cord

AF581A

HP C19 - CEE-VII EU 250V 16Amp 3.6m Power Cord

AF576A

HP C19 - CEI-23-50 IT/CL 250V 16Amp 3.6m Power Cord

AF580A

HP C19 - SABS-164 ZA 250V 16Amp 3.6m Power Cord

AF579A

HP C19 - BS-1363/A UK/HK/SG 250V 13Amp  3.6m Power Cord

359615-031

HP 240 VAC 4.5M Unterminated End NA Power Cord

E7806A

HPE Jumper Cables

HP C13 - C14 WW 250V 10A Gray 0.7m Jumper Cord

A0K03A

HP C13 - C14 WW 250V 10Amp 0.7m Jumper Cord

142257-B28

HP C13 - C14 WW 250V 10Amp 1.4m Jumper Cord

142257-006

HP C13 - C14 WW 250V 10A Gray 1.37m Jumper Cord

A0K04A

HP C13 - C14 WW 250V 10Amp 1.4m 15 pc Jumper Cord

142257-007

HP C13 - C14 WW 250V 10Amp 2.0m Jumper Cord

A0K02A

HP C13 - C14 WW 250V 10Amp Flint Gray 2.0m Jumper Cord

AF573A

HP C13 - C14 WW 250V 10Amp 2.5m Jumper Cord

142257-002

HP C13 - C14 WW 250V 10Amp 3.0m Jumper Cord

142257-003

HP C13 - C14 WW 250V 10A Gray 3.0m Jumper Cord

A0K06A

HP C20 - C13 WW 250V 15Amp 2.0m Jumper Cord

AF590A

HP C19 - C20 WW 250V 16Amp Flint Gray 1.20m Jumper Cord

AF575A

HP C19 - C20 WW 250V 16Amp Flint Gray 2.0m Jumper Cord

AF574A

HP C19 - C20 WW 250V 16Amp 2.5m Jumper Cord

295633-B22

HP 200-250V 10A C15 to C14 .76m Jumper Cable

E7807A

HPE Mounting Brackets

HP Vertical PDU 10K G2 Mounting Kit

H6L32A

NOTE: Allows HPE Basic and Metered and Switched Power Distribution Units (PDU) vertical models to be mounted in HPE 10000 G2 series racks and in the HPE Basic Series rack. This bracket is not needed for mounting in the HPE Advanced or Enterprise Series racks. PDUs may interfere with the rear maintenance zone when using these brackets.

Half Height Vertical Models

Model

Part Number

Input Voltage

Current (Maximum)

Load Capacity

Input Connection

Output Circuit Breaker

Outlet Connections

3.6kVA PDU

H8B49A

100-240V

16A

3680VA
 @ 230V

Detachable cord with IEC 320-C20 inlet

N/A

7 x IEC C13
1 x IEC C19

NOTE: Model H8B49A includes an IEC320-C20 power inlet and does not include an inlet power cord.  Customers may choose from multiple Hewlett Packard Enterprise country specific C19 PDU inlet cords that are listed in the “Related Options” section of this QuickSpecs.

Full Height Vertical Models

Model

Part Number

Input Voltage

Current (Maximum)

Load Capacity

Input Connection

Output Circuit Breaker

Outlet Connections

2.8kVA PDU

H8B48A

100-127V

24A

2880VA
@ 120V

10ft(3m) cord with NEMA L5-30P

2 x 20A

24 x NEMA 5-20R

4.9kVA PDU

H8B50A

200-240V

24A

4992VA
@ 208V

10ft(3m) cord with NEMA L6-30P

2 x 20A

20 x IEC C13
4 x IEC C19

7.3kVA PDU

H8B51A

200-240V

32A

7360
@ 230V

10ft(3m) cord with IEC 60309 32A 3-wire

2 x 16A

20 x IEC C13
4 x IEC C19

8.6kVA PDU

H8B52A

200-240V
3 Phase Delta

24A

8646VA
@ 208V

10ft(3m) cord with NEMA L15-30P

3 x 20A

18 x IEC C13
6 x IEC C19

8.6kVA PDU

H8B53A

120/208V
3 Phase WYE

24A

8646VA
@ 208V

10ft(3m) cord with NEMA L21-30P

3 x 20A

20 x IEC C13
3 x IEC C19
1 x NEMA 5-20R

11kVA PDU

H8B54A

200-240/

346-415V
3 Phase WYE

16A

11040VA
@ 230V

10ft(3m) cord with IEC 60309 16A 5-wire

N/A

21 x IEC C13
3 x IEC C19

14.4kVA PDU

H8B55A

200-240V
3 Phase Delta

40A

14410VA
@ 208V

10ft(3m) cord with
CS8365C 50A 4-wire

6 x 20A

12 x IEC C13
12 x IEC C19

17.3kVA PDU

H8B56A

200-240V
3 Phase Delta

48A

17292VA @ 208V

10ft(3m) cord with IEC 60309 60A 4-wire Watertight

6 x 20A

12 x IEC C13
12 x IEC C19

Disclaimer: Hewlett Packard Enterprise makes no recommendations regarding power connectors. Please consult a licensed professional to determine the best connector or receptacle for your specific needs.

Voltage

Amps

# Wires

Plug Name

Sample Plug Image
(color may vary by manufacturer)

100-125V

Single Phase

20 A

3

NEMA L5-20P

30 A

3

NEMA L5-30P

200-240V

Single Phase

20 A

3

IEC C20

20 A

3

NEMA L6-20P

30 A

3

NEMA L6-30P

32 A

3

IEC 309 32A, 2Pole, 3Wire

20 A

5

NEMA L21-20P

208V

Three Phase

16 A

5

IEC 309 16 A, 3Pole, 5Wire

30 A

5

NEMA L21-30P

50 A

4

CS8365C

60 A

4

IEC 309 60A, 3Pole, 4Wire

400 - 415V

Three Phase

32 A

5

IEC 309 32 A, 3Pole, 5Wire

Operational Temperature (NA and NA/JPN models)

32° to 140° F (0° to 60° C)

Operating Temperature (INTL and WW models)

32° to 131° F (0° to 55° C) with an 8A maximum load/outlet
32° to 113° F (0° to 45° C) with outlet fully loaded

Operating Relative Humidity (%)

10% to 90%

Operating Elevation

0 to 10,000 ft (0 to 3048 m)

Storage Temperature

-4° to 140° F (-20° to 60° C)

Storage Relative Humidity (%)

5% to 95%

Storage Elevation

0 to 30,000 ft (0 to 9144 m)

Input Plug Length (attached cord units)

120 inches (304.8 cm)

Conformance Standards

NA/JPN models: UL or CSA, CB Test + FCC, ICES, VCCI
INTL models: CE, TUV, KC, EAC, +KCC, ACMA, Ukraine
WW Models: UL or CSA, CB Test + CE, TUV, EAC, FCC, ICES, KCC, KC, VCCI,     
  ACMA, Ukraine

Mechanical Dimensions (WxHxD) - Half Height model (H8B49A)

2.05 x 35.5 x 2.09 in (5.2 x 90.2 x 5.3 cm)

Mechanical Dimensions (WxHxD) - Full Height models (H8B50A/H8B51A/H8B53A/H8B54A)

2.05 x 66.5 x 2.09 in (5.2 x 168.9 x 5.3 cm)

Mechanical Dimensions (WxHxD) - Full Height models (H8B48A/H8B52A/H8B55A/H8B56A)

2.05 x 66.5 x 2.56 in (5.2 x 168.9 x 6.5 cm)

Unit Weight

H8B48A: 11.55 lbs (5.24 kg); H8B49A: 4.06 lbs (1.84 kg);
H8B50A: 11.75 lbs (5.33 kg); H8B51A: 10.85 lbs (4.92 kg);

H8B52A: 13.74 lbs (6.23 kg); H8B53A: 13.23 lbs (6.00 kg)

H8B54A: 10.14 lbs (4.60 kg); H8B55A: 21.91 lbs (9.94 kg);

H8B56A: 23.08 lbs (10.47kg)

Kit Contents - All Metered and Switched PDUs

All models ship with:

• Mounting buttons or hardware
• Tie wraps for cable retention
• 6ft RJ45-RJ45 communications cable
• 6ft RJ45-DB9 Serial cable
• Documentation

Environment-friendly Products and Approach

End-of-life Management and Recycling

Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest Hewlett Packard Enterprise sales office. Products returned to Hewlett Packard Enterprise will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard Enterprise web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as Hewlett Packard Enterprise OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment.