Главная Справочники HPE Networking Software

HPE IMC QoS Software: технические характеристики и документация

Нужна помощь с конфигурацией?

Пришлите SKU, спецификацию или список требований. Специалист Apltech проверит совместимость компонентов и найдёт актуальные артикулы

Получить консультацию →

HPE IMC QoS Software: технические характеристики и документация

HPE IMC QoS Software

Overview

Have feedback on QuickSpecs? We're listening

HPE IMC QoS Software QuickSpecs

Modular comprehensive resource management platform

With its extensive device support, IMC software provides true end-to-end management for the entire network, as well as the open operation cycle.

HPE IMC QoS software enhances visibility and control over QoS configurations on network devices and helps administrators focus on QoS service planning and the most economical and effective use of network resources by providing a rich set of QoS device and configuration management functions. IMC QoS software provides real-time network detection of QoS configurations as it identifies QoS network-wide configurations, enabling unified management of QoS policies.

In addition, IMC QoS software allows administrators to organize traffic into different classes based on the configured matching criteria (e.g., IP protocol type) to provide differentiated services. The software provides insight into committed access rate (CAR), generic traffic shaping (GTS), priority marking, queue scheduling, and congestion avoidance, which enables IT staff to more effectively control and allocate network resources.

Models
HPE Networking Intelligent Management Center QoS Manager License E-LTU	JF408AAE

Key features

- Traffic classification in QoS policy

- Flexible deployment scheme for QoS policies

- Broadcast and multicast support

- Automatic topology discovery

- Bandwidth-sharing fairness among stations

Features and Benefits

Quality of Service (QoS)

- Powerful QoS equipment management
in combination with the functions provided with the IMC platform, a QoS-enabled device can be added to IMC QoS Manager for managing QoS-specific functions; support for Cisco devices using IPSLA is now available

- Automatic discovery of existing QoS services
supplies predefined service identification character base; the QoS configuration on a device is automatically obtained by following the configuration guide and is saved on QoS Manager selectively; the QoS configuration, as a policy that is applied in a direction of the device interface or VLAN, includes the traffic classification, traffic behavior, traffic policy, and policy application

- Centralized traffic classification
administrators can set traffic classification policy in which the traffic is classified with certain rules, such as the source address, destination address, IP protocol, or the port number of the application; administrators can configure the features such as CAR, GTS, traffic policy, and WRED to control the data stream and reasonably allocate network resources; users can add, modify, delete, copy, and view classification or behavior

- Diversified QoS deployment guide
a traffic policy that is composed of the traffic classification and traffic behavior is bound to a device interface, VLAN, or VPN; users can configure different devices according to a deployment solution; a general QoS configuration and industry-customized QoS configuration guides are provided, such as VoIP service

- Integration of QoS management and network traffic analysis
administrators can clearly understand a network traffic model on the basis of traffic representation and discover the bandwidth utilization and application traffic use condition of a network interface or VLAN; according to the result of traffic analysis, a QoS policy is formulated across the whole network through the QoS Manager

- Integration of QoS management and network configuration
provides functions such as automatically performing device configuration backups at certain times, comparing the startup configuration with the running configuration of a device, and comparing the history configuration with the current startup or startup configuration of a device. QoS configurations and others can be standardized and managed uniformly

Warranty and support

- Electronic and telephone support
Limited electronic and business-hours telephone support is available from Hewlett Packard Enterprise; to reach our support centers, refer to http://www.hpe.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to Warranty and support summary

- Software releases
to find software for your product, refer to http://www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to Warranty and support summary

Technical Specifications

HPE Intelligent Management Center QoS Manager E-LTU (JF408AAE)
Platform required	Server: HPE Intelligent Management Center Enterprise Software HPE Intelligent Management Center Standard Software
Notes	Notes: See the HPE IMC Standard or Enterprise Platform data sheet for the required software environment. This component can be installed on the same server as the IMC platform. If the SLA module needs to collect large volumes of data, HPE recommends that customers install an SLA collector separately on the secondary server
Services	Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

Summary of Changes

Date	Version History	Action	Description of Change
16-Mar-2026	Version 11	Changed	Rebranding update applied to QuickSpecs.
17-June-2016	Version 10	Changed	Product descriptions updated.
01-Dec-2015	Version 9	Changed	QuickSpecs name changed to HPE IMC QoS Software Product overview, Features and benefits and Technical Specifications updated
29-Sep-2014	Version 8	Changed	Updated Product Overview, Features and Benefits and Technical Specifications
30-Sep-2013	Version 7	Changed	The Product overview, Key Features, Features and Benefits, model specifications and Options were updated.
30-Aug-2013	Version 6	Changed	The title was changed.
13-Jun-2013	Version 5	Removed	License models were removed.
25-Jun-2012	Version 4	Changed	Made changes throughout the QuickSpecs.
13-Feb-2012	Version 3	Changed	The Features and Benefits, model names and Options were updated.
06-Apr-2011	Version 2	Changed	The QuickSpecs was completely revised, including updating the title.
07-Oct-2010	Version 1	New	New QuickSpecs.

		Have feedback on QuickSpecs? We're listening

		Chat now
		© Copyright 2026 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. To learn more, visit http://www.hpe.com/networking Microsoft, Windows, and Windows Server are U.S. registered trademarks of the Microsoft group of companies. Oracle is a registered trademark of Oracle and/or its affiliates. Red Hat is a registered trademark of Red Hat, Inc. in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries. VMware is a registered trademark or trademark of VMware, Inc. in the United States and/or other jurisdictions. c04111572 - 13853 - Worldwide - V11 - 16-March-2026
		HEWLETT PACKARD ENTERPRISE HPE.com