HPE FlexNetwork 5120 SI Switch Series: технические характеристики и документация

HPE FlexNetwork 5120 SI Switch Series

Models

HPE FlexNetwork 5120 8G PoE+ (180W) SI Switch

JG309B

HPE FlexNetwork 5120 8G PoE+ (65W) SI Switch

JG310B

HPE FlexNetwork 5120 48G SI Switch

JE072B

HPE FlexNetwork 5120 16G SI Switch

JE073B

HPE FlexNetwork 5120 24G SI Switch

JE074B

HPE FlexNetwork 5120 24G PoE+ (370W) SI Switch

JG091B

Key features

• Full wire-speed, multi-layer switching
• High reliability with redundancy
• Comprehensive security control policies
• Diversified Quality of Service (QoS) policies
• Excellent manageability

Product overview

The HPE FlexNetwork 5120 SI Switch Series comprises intelligent, fully managed Gigabit Ethernet switches that provide high performance, high port density, and simplified installation to improve the value of your network infrastructure investment. The 5120 SI series is enhanced for the access layer in enterprise networks that require Gigabit Ethernet to the desktop or at the distribution layer in metropolitan area networks (MANs). Wirespeed forwarding delivers more effective throughput and the bandwidth necessary for mission-critical data and high-speed communications. As part of their comprehensive security control, 5120 SI switches employ IEEE 802.1X authentication to identify users who attempt to access the network. These switches are highly reliable, providing redundancy while eliminating loops in the network. They also offer a range of management protocols to simplify network administration.

Features and benefits

Quality of Service (QoS)

• Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
• Powerful QoS feature: supports the following congestion actions: strict priority (SP) queuing, SDWRR, and SP+SDWRR
• Advanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port basis

Management

• Friendly port names: allows assignment of descriptive names to ports
• Remote configuration and management: enables configuration and management through a secure Web browser or a CLI located on a remote device
• Manager and operator privilege levels: provides read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces
• Command authorization: leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents activity
• Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
• Dual flash images: provides independent primary and secondary operating system files for backup while upgrading
• Multiple configuration files: stores easily to the flash image
• Complete session logging: provides detailed information for problem identification and resolution
• SNMPv1, v2c, and v3: facilitate centralized discovery, monitoring, and secure management of networking devices
• Remote monitoring (RMON): uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private alarm extension group
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP): advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
• Management VLAN: segments traffic to and from management interfaces, including CLI/Telnet, a Web browser interface, and SNMP
• Device Link Detection Protocol (DLDP): monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, this prevents network problems such as loops
• Intelligent Resilient Fabric (IRF): allows configuration and management of a system of up to four devices by accessing a single switch connected with Gigabit Ethernet links; this has great advantages in reliability, distributed deployment, and easy management

Connectivity

• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports
• Flow control: provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
• Jumbo packet support: supports up to 10k byte frame size to improve performance of large data transfers
• High-density port connectivity: provides up to 48 fixed 10/100/1000BASE-T ports in an entry-level static Layer 3 switch
• Ethernet operations, administration and maintenance (OAM): detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the status of the link between two devices
• Power over Ethernet Plus (PoE+) support: provides 30 W power for connected devices, simplifies deployment, and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location
• IPv6:

- IPv6 Host: enables switches to be managed and deployed at the IPv6 network's edge

- Dual stack (IPv4 and IPv6 using BIS): allows IPv4 hosts to communicate with IPv6 hosts

- IPv6 ACL: for filtering IPv6 network traffic

Performance

• Nonblocking architecture: up to 104 Gb/s nonblocking switching fabric provides wirespeed switching with up to 77.4 million pps throughput
• Hardware-based wire-speed access control lists (ACLs): feature-rich ACL implementation (TCAM-based) helps ensure high levels of security and ease of administration without impacting network performance

Resiliency and high availability

• Separate data and control paths: increases security and performance
• Spanning Tree/MSTP, RSTP: provide redundant links while preventing network loops
• IEEE 802.3ad Link Aggregation Control Protocol (LACP): supports up to 26 trunks, each with 8 links per trunk; supports static or dynamic groups
• Smart link: allows 50 ms failover between links

Layer 2 switching

• 8K MAC address table: provides access to many Layer 2 devices
• VLAN support and tagging: supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs
• IP multicast snooping: automatically prevents flooding of IP multicast traffic
• Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping: controls and manages the flooding of multicast packets in a Layer 2 network

Layer 3 services

• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses
• Dynamic Host Configuration Protocol (DHCP): simplifies the management of large IP networks; supports client; DHCP Relay enables DHCP operation across subnets
• Loopback interface address: defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability

Layer 3 routing

• Static IP routing: provides manually configured routing for both IPv4 and IPv6 networks

Security

• Access control lists (ACLs): provides IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port ACL, and IPv6 ACL
• Identity-driven security and access control:

- Per-user ACLs: permits or denies user access to specific network resources based on user identity and time of day, allowing multiple types of users on the same network to access specific network services without risking network security or allowing unauthorized access to sensitive data

- Automatic VLAN assignment: automatically assigns users to the appropriate VLAN based on their identities

• Secure management access: delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
• Secure FTP: allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
• Guest VLAN: provides a browser-based environment to authenticated clients that is similar to IEEE 802.1X
• Port isolation: secures and adds privacy, and prevents malicious attackers from obtaining user information
• STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
• STP Root Guard: protects the root bridge from malicious attacks or configuration mistakes
• DHCP protection: blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
• Dynamic ARP protection: blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
• IP Source Guard: helps prevent IP spoofing attacks
• Endpoint Admission Defense (EAD): provides security policies to users accessing a network
• RADIUS/HWTACACS: eases switch management security administration by using a password authentication server
• Port security: allows access only to specified MAC addresses, which can be learned or specified by the administrator
• MAC-based authentication: allows or denies access to the switch based on a client MAC address

Convergence

• IEEE 802.1AB Link Layer Discovery Protocol (LLDP): facilitates easy mapping using network management applications with LLDP automated device discovery protocol
• LLDP-MED: is a standard extension that automatically configures network devices, including LLDP-capable IP phones
• LLDP-CDP compatibility: receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
• Voice VLAN: automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
• IP multicast snooping (data-driven IGMP): prevents flooding of IP multicast traffic
• Multicast VLAN: reduces network bandwidth demand by eliminating multiple streams to each VLAN

Additional information

• Green IT and power: improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes variable-speed fans, reducing energy costs
• Green initiative support: provides support for RoHS and WEEE regulations

 Warranty and support 

• Limited Lifetime Warranty
  See http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
• Software releases
  to find software for your product, refer to http://www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary  

Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

HPE FlexNetwork 5120 16G SI Switch

JE073B

• 16 RJ-45 autosensing 10/100/1000 ports
• 4 fixed Gigabit Ethernet SFP ports
• min=0 \ max=4 SFP  Transceivers
• 1U - Height

See Configuration NOTE:1, 2

PDU Cable NA/MEX/TW/JP

JE073B#B2B

• C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable NA/MEX/TW/JP

JE073B#B2C

• C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord

JE073B#B2E

• HPE 2.3M C13 to NEMA L6-20P Power Cord(J9936A)

No Power Cord

JE073B#AC3

• No Localized Power Cord Selected

HPE FlexNetwork 5120 24G SI Switch

JE074B

• 24 RJ-45 autosensing 10/100/1000 ports
• 4 fixed Gigabit Ethernet SFP ports
• min=0 \ max=4 SFP  Transceivers
• 1U - Height

See Configuration NOTE:1, 2

PDU Cable NA/MEX/TW/JP

JE074B#B2B

• C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable NA/MEX/TW/JP

JE074B#B2C

• C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord

JE074B#B2E

• HPE 2.3M C13 to NEMA L6-20P Power Cord(J9936A)

No Power Cord

JE074B#AC3

• No Localized Power Cord Selected

HPE FlexNetwork 5120 24G PoE+ (370W) SI Switch

JG091B

• 24 RJ-45 autosensing 10/100/1000 ports
• 4 fixed Gigabit Ethernet SFP ports
• min=0 \ max=4 SFP  Transceivers
• 1U - Height

See Configuration NOTE:1, 2

PDU Cable NA/MEX/TW/JP

JG091B#B2B

• C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable NA/MEX/TW/JP

JG091B#B2C

• C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord

JG091B#B2E

• HPE 2.3M C13 to NEMA L6-20P Power Cord(J9936A)

No Power Cord

JG091B#AC3

• No Localized Power Cord Selected

HPE FlexNetwork 5120 48G SI Switch

JE072B

• 48 RJ-45 autosensing 10/100/1000 ports
• 4 fixed Gigabit Ethernet SFP ports
• min=0 \ max=4 SFP  Transceivers
• 1U - Height

See Configuration NOTE:1, 2

PDU Cable NA/MEX/TW/JP

JE072B#B2B

• C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable NA/MEX/TW/JP

JE072B#B2C

• C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord

JE072B#B2E

• HPE 2.3M C13 to NEMA L6-20P Power Cord(J9936A)

No Power Cord

JE072B#AC3

• No Localized Power Cord Selected

HPE FlexNetwork 5120 8G PoE+ (180W) SI Switch

JG309B

• 48 RJ-45 autosensing 10/100/1000 ports
• 1 fixed Gigabit Ethernet SFP ports
• min=0 \ max=1 SFP  Transceivers
• 1U - Height

See Configuration NOTE:1, 2

PDU Cable NA/MEX/TW/JP

JG309B#B2B

• C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable NA/MEX/TW/JP

JG309B#B2C

• C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord

JG309B#B2E

• HPE 2.3M C13 to NEMA L6-20P Power Cord(J9936A)

No Power Cord

JG309B#AC3

• No Localized Power Cord Selected

HPE FlexNetwork 5120 8G PoE+ (65W) SI Switch

JG310B

• 48 RJ-45 autosensing 10/100/1000 ports
• 1 fixed Gigabit Ethernet SFP ports
• min=0 \ max=1 SFP  Transceivers
• 1U - Height

See Configuration NOTE:1, 2

PDU Cable NA/MEX/TW/JP

JG310B#B2B

• C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable NA/MEX/TW/JP

JG310B#B2C

• C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord

JG310B#B2E

• HPE 2.3M C13 to NEMA L6-20P Power Cord(J9936A)

No Power Cord

JG310B#AC3

• No Localized Power Cord Selected

Configuration Rules:

Note 1

The following Transceivers install into this Module:

HPE X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HPE X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HPE X120 1G SFP LC SX Transceiver

JD118B

HPE X120 1G SFP LC LX Transceiver

JD119B

HPE X125 1G SFP LC LH70 Transceiver

JD063B

HPE X120 1G SFP LC BX 10-U Transceiver

JD098B

HPE X120 1G SFP LC BX 10-D Transceiver

JD099B

HPE X120 1G SFP RJ45 T Transceiver

JD089B

Note 2

Localization required. (See Localization Menu for list.)

Remarks:

Drop down under power supply should offer the following options and results:

Switch/Router to PDU Power Cord -  #B2B in NA, Mexico, Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)

Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)

High Volt Switch/Router/Power Supply to Wall Power Cord -  #B2E Option. (Offered only in North America, Mexico, Taiwan, and  Japan)

No Localized Power Cord Selected - #AC3 Option

 Rack Level Integration CTO Models

HPE FlexNetwork 5120 16G SI Switch

JE073B

• 16 RJ-45 autosensing 10/100/1000 ports
• 4 fixed Gigabit Ethernet SFP ports
• min=0 \ max=4 SFP  Transceivers
• 1U - Height

See Configuration NOTE:1, 2, 3

PDU Cable NA/MEX/TW/JP

JE073B#B2B

• C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable NA/MEX/TW/JP

JE073B#B2C

• C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord

JE073B#B2E

• HPE 2.3M C13 to NEMA L6-20P Power Cord(J9936A)

No Power Cord

JE073B#AC3

• No Localized Power Cord Selected

HPE FlexNetwork 5120 24G SI Switch

JE074B

• 24 RJ-45 autosensing 10/100/1000 ports
• 4 fixed Gigabit Ethernet SFP ports
• min=0 \ max=4 SFP  Transceivers
• 1U - Height

See Configuration NOTE:1, 2, 3

PDU Cable NA/MEX/TW/JP

JE074B#B2B

• C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable NA/MEX/TW/JP

JE074B#B2C

• C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord

JE074B#B2E

• HPE 2.3M C13 to NEMA L6-20P Power Cord(J9936A)

No Power Cord

JE074B#AC3

• No Localized Power Cord Selected

HPE FlexNetwork 5120 24G PoE+ (370W) SI Switch

JG091B

• 24 RJ-45 autosensing 10/100/1000 ports
• 4 fixed Gigabit Ethernet SFP ports
• min=0 \ max=4 SFP  Transceivers
• 1U - Height

See Configuration NOTE:1, 2, 3

PDU Cable NA/MEX/TW/JP

JG091B#B2B

• C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable NA/MEX/TW/JP

JG091B#B2C

• C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord

JG091B#B2E

• HPE 2.3M C13 to NEMA L6-20P Power Cord(J9936A)

No Power Cord

JG091B#AC3

• No Localized Power Cord Selected

HPE FlexNetwork 5120 48G SI Switch

JE072B

• 48 RJ-45 autosensing 10/100/1000 ports
• 4 fixed Gigabit Ethernet SFP ports
• min=0 \ max=4 SFP  Transceivers
• 1U - Height

See Configuration NOTE:1, 2, 3

PDU Cable NA/MEX/TW/JP

JE072B#B2B

• C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable NA/MEX/TW/JP

JE072B#B2C

• C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord

JE072B#B2E

• HPE 2.3M C13 to NEMA L6-20P Power Cord(J9936A)

No Power Cord

JE072B#AC3

• No Localized Power Cord Selected

Configuration Rules:

Note 1

The following Transceivers install into this Module:

HPE X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HPE X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HPE X120 1G SFP LC SX Transceiver

JD118B

HPE X120 1G SFP LC LX Transceiver

JD119B

HPE X125 1G SFP LC LH70 Transceiver

JD063B

HPE X120 1G SFP LC BX 10-U Transceiver

JD098B

HPE X120 1G SFP LC BX 10-D Transceiver

JD099B

HPE X120 1G SFP RJ45 T Transceiver

JD089B

Note 2

Localization required. (See Localization Menu for list.)

Note 3

If HPE CTO Switch Chassis is selected to be  Rack Level Integration, Then the CTO Switch Chassis needs to integrate (with #0D1) to the P9K48A HPE Universal Rack Only. (Default to the P9K48A)

Remarks:

Drop down under power supply should offer the following options and results:

Switch/Router to PDU Power Cord -  #B2B in NA, Mexico, Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)

Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)

High Volt Switch/Router/Power Supply to Wall Power Cord -  #B2E Option. (Offered only in North America, Mexico, Taiwan, and  Japan)

No Localized Power Cord Selected - #AC3 Option

Transceivers

SFP Transceivers

HPE X120 1G SFP LC SX Transceiver

JD118B

HPE X120 1G SFP LC LX Transceiver

JD119B

HPE X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HPE X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HPE X125 1G SFP LC LH70 Transceiver

JD063B

HPE X120 1G SFP LC BX 10-U Transceiver

JD098B

HPE X120 1G SFP LC BX 10-D Transceiver

JD099B

HPE X120 1G SFP RJ45 T Transceiver

JD089B

Cables

Multi-Mode Cables

HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable

AJ833A

HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable

AJ834A

HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable

AJ835A

HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable

AJ836A

HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable

AJ837A

HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable

AJ838A

HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable

AJ839A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable

QK732A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable

QK733A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable

QK734A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable

QK735A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable

QK736A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable

QK737A

HPE FlexNetwork 3600 Switch SFP Stacking Kit

JD324B

Switch Enclosure Options

External/Redundant Power Supplies

HPE RPS1600 Redundant Power System

JG136A

• Height = 1U
• includes 1 x c13,  1600w and Power Supply port

See Configuration NOTE:2, 3

HPE RPS1600 1600W AC Power Supply

JG137A

• Installs into JG136A only

See Configuration NOTE:1

No Power Cord

JG137A#AC3

• No Localized Power Cord Selected

Configuration Rules:

Note 1

If this power supply is selected, The JG136A - HPE A-RPS1600 Redundant Power System must be on ordered or onsite.

Note 2

Localization required. (See Localization Menu for list.)

Note 3

Only 1 JG136A can be connected per switch.

Rack Mount Kit

HPE 3100/4210 16/8 PoE Rackmount Kit

JD323A

See Configuration NOTE:1

Configuration Rules:

Note 1

This rack mount kit is only supported on the following switches:

HPE FlexNetwork 5120 8G PoE+ (180W) SI Switch

JG309B

HPE FlexNetwork 5120 8G PoE+ (65W) SI Switch

JG310B

Options for External/Redundant Power Supplies

HPE X290 1000 A JD5 2m RPS Cable

JD187A

HPE FlexNetwork 5120 8G PoE+ (180W) SI Switch (JG309B)

I/O ports and slots

8 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

1 SFP fixed Gigabit Ethernet SFP port

Additional ports and slots

1 RJ-45 serial console port

Physical characteristics

Dimensions

11.81(w) x 6.3(d) x 1.72(h) in (30.0 x 26 x 4.36 cm) (1U height)

Weight

6.61 lb (3 kg)

Memory and processor

128 MB flash, 128 MB SDRAM; Packet buffer size: 0.5 MB

Mounting and enclosure

Requires angle mounting set if rack mounted (not included)

Performance

1000 Mb Latency

< 3 µs

Throughput

up to 13.4 Mpps

Routing/Switching capacity

18 Gbps

Routing table size

32 entries (IPv4)

MAC address table size

8192 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Acoustic

Pressure: 39.4 dB, Low-speed fan: 39.4 dB, High-speed fan: 48.6 dB; ISO 7779

Electrical characteristics

Maximum heat dissipation

163 BTU/hr (171.97 kJ/hr)

Voltage

100 - 240 VAC, rated

(depending on power supply chosen)

Maximum power rating

230 W

Idle power

19 W

PoE power

180 W PoE+

Frequency

50/60 Hz

Notes

Idle power is the actual power consumption of the device with no ports connected.

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

PoE Power is the power supplied by the internal power supply, it is dependent on the type and quantity of power supplies and may be supplemented with the use of a External Power Supply (EPS).

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR 22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

Management

IMC - Intelligent Management Center; Command-line interface; Web browser; SNMP manager

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexNetwork 5120 8G PoE+ (65W) SI Switch (JG310B)

I/O ports and slots

8 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

1 SFP fixed Gigabit Ethernet SFP port

Additional ports and slots

1 RJ-45 serial console port

Physical characteristics

Dimensions

11.81(w) x 6.3(d) x 1.72(h) in (30.0 x 26.0 x 4.36 cm) (1U height)

Weight

6.61 lb (3 kg)

Memory and processor

128 MB flash, 128 MB SDRAM; Packet buffer size: 0.5 MB

Mounting and enclosure

Requires angle mounting set if rack mounted (not included)

Performance

1000 Mb Latency

< 3 µs

Throughput

up to 13.4 Mpps

Routing/Switching capacity

18 Gbps

Routing table size

32 entries (IPv4)

MAC address table size

8192 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Acoustic

N/A (fanless)

Electrical characteristics

Maximum heat dissipation

95 BTU/hr (100.23 kJ/hr)

Voltage

100 - 240 VAC, rated

(depending on power supply chosen)

Maximum power rating

93 W

Idle power

10 W

PoE power

65 W PoE+

Frequency

50/60 Hz

Notes

Idle power is the actual power consumption of the device with no ports connected.

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

PoE Power is the power supplied by the internal power supply, it is dependent on the type and quantity of power supplies and may be supplemented with the use of a External Power Supply (EPS).

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR 22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN

61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

Management

IMC - Intelligent Management Center; Command-line interface; Web browser; SNMP manager

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexNetwork 5120 48G SI Switch (JE072B)

I/O ports and slots

48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 fixed Gigabit Ethernet SFP ports

Additional ports and slots

1 RJ-45 serial console port

Physical characteristics

Dimensions

17.3(w) x 10.24(d) x 1.72(h) in (43.94 x 26.0 x 4.37 cm) (1U height)

Weight

11.02 lb (5 kg)

Memory and processor

128 MB flash, 128 MB SDRAM; Packet buffer size: 1 MB

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)

Performance

1000 Mb Latency

< 3 µs

Throughput

up to 77.4 Mpps

Routing/Switching capacity

104 Gbps

Routing table size

32 entries (IPv4)

MAC address table size

8192 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Acoustic

Pressure: 42.2 dB, Low-speed fan: 42.2 dB, High-speed fan: 50 dB; ISO 7779

Electrical characteristics

Maximum heat dissipation

204 BTU/hr (215.22 kJ/hr)

Voltage

100 - 240 VAC, rated

(depending on power supply chosen)

Maximum power rating

59.8 W

Idle power

25.7 W

Frequency

50/60 Hz

Notes

Idle power is the actual power consumption of the device with no ports connected.

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR 22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

Management

IMC - Intelligent Management Center; Command-line interface; Web browser; SNMP manager

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexNetwork 5120 16G SI Switch (JE073B)

I/O ports and slots

16 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 fixed Gigabit Ethernet SFP ports

Additional ports and slots

1 RJ-45 serial console port

Physical characteristics

Dimensions

17.3(w) x 6.3(d) x 1.72(h) in (43.94 x 16 x 4.37 cm) (1U height)

Weight

6.61 lb (3 kg)

Memory and processor

128 MB flash, 128 MB SDRAM; Packet buffer size: 0.5 MB

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)

Performance

1000 Mb Latency

< 3 µs

Throughput

up to 29.8 Mpps

Routing/Switching capacity

40 Gbps

Routing table size

32 entries (IPv4)

MAC address table size

8192 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Acoustic

Pressure: 44.4 dB; ISO 7779

Electrical characteristics

Maximum heat dissipation

85 BTU/hr (89.68 kJ/hr)

Voltage

100 - 240 VAC, rated

(depending on power supply chosen)

Maximum power rating

25.1 W

Idle power

11.9 W

Frequency

50/60 Hz

Notes

Idle power is the actual power consumption of the device with no ports connected.

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR 22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

Management

IMC - Intelligent Management Center; Command-line interface; Web browser; SNMP manager

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexNetwork 5120 24G SI Switch (JE074B)

I/O ports and slots

24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 fixed Gigabit Ethernet SFP ports

Additional ports and slots

1 RJ-45 serial console port

Physical characteristics

Dimensions

17.3(w) x 6.3(d) x 1.72(h) in (43.94 x 16 x 4.37 cm) (1U height)

Weight

6.61 lb (3 kg)

Memory and processor

128 MB flash, 128 MB SDRAM; Packet buffer size: 0.5 MB

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)

Performance

1000 Mb Latency

< 3 µs

Throughput

up to 41.7 Mpps

Routing/Switching capacity

56 Gbps

Routing table size

32 entries (IPv4)

MAC address table size

8192 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Acoustic

Pressure: 43.8 dB; ISO 7779

Electrical characteristics

Maximum heat dissipation

107 BTU/hr (112.89 kJ/hr)

Voltage

100 - 240 VAC, rated

(depending on power supply chosen)

Maximum power rating

31.5 W

Idle power

13.4 W

Frequency

50/60 Hz

Notes

Idle power is the actual power consumption of the device with no ports connected.

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR 22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

Management

IMC - Intelligent Management Center; Command-line interface; Web browser; SNMP manager

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexNetwork 5120 24G PoE+ (370W) SI Switch (JG091B)

I/O ports and slots

24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 fixed Gigabit Ethernet SFP ports

Additional ports and slots

1 RJ-45 serial console port

Physical characteristics

Dimensions

17.32(w) x 14.17(d) x 1.72(h) in (44.0 x 36 x 4.36 cm) (1U height)

Weight

15.43 lb (7 kg)

Memory and processor

128 MB flash, 128 MB SDRAM; Packet buffer size: 0.5 MB

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)

Performance

1000 Mb Latency

< 3 μs

Throughput

up to 41.7 Mpps

Routing/Switching capacity

56 Gbps

Routing table size

32 entries (IPv4)

MAC address table size

8192 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%, noncondensing

Acoustic

Low-speed fan: 51.8 dB, High-speed fan: 55.3 dB; ISO 7779

Electrical characteristics

Maximum heat dissipation

539 BTU/hr (568.65 kJ/hr)

Voltage

100 - 240 VAC, rated

(depending on power supply chosen)

Maximum power rating

832 W

Idle power

27.5 W

PoE power

720 W PoE+, optional

Frequency

50/60 Hz

Notes

Idle power is the actual power consumption of the device with no ports connected.

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

PoE power is the power supplied by the internal power supply and the optional redundant power unit.

With AC input, the maximum power consumption is 528 W (370 W for PoE).

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR 22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

Management

IMC - Intelligent Management Center; Command-line interface; Web browser; SNMP manager

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

Standards and protocols
(applies to all products in series)

General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.1X PAE
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X Gigabit Ethernet over fiber
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 951 BOOTP
RFC 1350 TFTP Protocol (revision 2)
RFC 2131 DHCP
RFC 2865 Remote Authentication Dial In User
Service (RADIUS)
RFC 2866 RADIUS Accounting

IPv6
RFC 1350 TFTP

RFC 1886 DNS Extension for IPv6

RFC 1887 IPv6 Unicast Address Allocation Architecture

RFC 1981 IPv6 Path MTU Discovery

RFC 2292 Advanced Sockets API for IPv6

RFC 2373 IPv6 Addressing Architecture

RFC 2460 IPv6 Specification

RFC 2461 IPv6 Neighbor Discovery

RFC 2462 IPv6 Stateless Address Auto-configuration

RFC 2463 ICMPv6

RFC 2464 Transmission of IPv6 over Ethernet Networks

RFC 2475 IPv6 DiffServ Architecture

RFC 2553 Basic Socket Interface Extensions for IPv6

RFC 2711 IPv6 Router Alert Option

RFC 2893 Transition Mechanisms for IPv6 Hosts and Routers

RFC 2925 Definitions of Managed Objects for Remote Ping, Traceroute, and Lookup Operations (Ping only)

RFC 2925 Remote Operations MIB (Ping only)

RFC 3056 Connection of IPv6 Domains via IPv4 Clouds

RFC 3162 RADIUS and IPv6

RFC 3363 DNS support

RFC 3484 Default Address Selection for IPv6

RFC 3493 Basic Socket Interface Extensions for IPv6

RFC 3513 IPv6 Addressing Architecture

RFC 3542 Advanced Sockets API for IPv6

RFC 3587 IPv6 Global Unicast Address Format

RFC 3596 DNS Extension for IPv6

RFC 3736 Stateless Dynamic Host Configuration Protocol (DHCP) Service for IPv6

RFC 4007 IPv6 Scoped Address Architecture

RFC 4022 MIB for TCP

RFC 4113 MIB for UDP

RFC 4251 SSHv6 Architecture

RFC 4252 SSHv6 Authentication

RFC 4253 SSHv6 Transport Layer

RFC 4254 SSHv6 Connection

RFC 4291 IP Version 6 Addressing Architecture

RFC 4293 MIB for IP

RFC 4419 Key Exchange for SSH

RFC 4443 ICMPv6

RFC 4541 IGMP & MLD Snooping Switch

RFC 4861 IPv6 Neighbor Discovery

RFC 4862 IPv6 Stateless Address Auto-configuration

RFC 5095 Deprecation of Type 0 Routing Headers in IPv6

RFC 5722 Handling of Overlapping IPv6 Fragments

MIBs
IEEE8021-PAE-MIB
IEEE8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
RFC 2233 Interface MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Target MIB
RFC 2618 RADIUS Authentication Client MIB
RFC 2620 RADIUS Accounting Client MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2819 RMON MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 4133 Entity MIB (Version 3)
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB

Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3

HPE FlexNetwork 5120 SI Switch Series accessories

Transceivers

HPE X120 1G SFP LC SX Transceiver

JD118B

HPE X120 1G SFP LC LX Transceiver

JD119B

HPE X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HPE X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HPE X125 1G SFP LC LH70 Transceiver

JD063B

HPE X120 1G SFP LC BX 10-U Transceiver

JD098B

HPE X120 1G SFP LC BX 10-D Transceiver

JD099B

HPE X120 1G SFP RJ45 T Transceiver

JD089B

Cables

HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable

AJ833A

HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable

AJ834A

HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable

AJ835A

HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable

AJ836A

HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable

AJ837A

HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable

AJ838A

HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable

AJ839A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable

QK732A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable

QK733A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable

QK734A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable

QK735A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable

QK736A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable

QK737A

HPE FlexNetwork 3600 Switch SFP Stacking Kit

JD324B

HPE FlexNetwork 5120 24G PoE+ (370W) SI Switch (JG091B)

HPE RPS1600 Redundant Power System ¹

JG136A

HPE RPS1600 1600W AC Power Supply ¹

JG137A

HPE X290 1000 A JD5 2m RPS Cable

JD187A

¹ Products covered by 1 year warranty.  See details at http://www.hpe.com/networking/warrantyquickref

Date

Version History

Action

Description of Change

07-May-2018

Version 21

Added

SKU added: JD324B

15-Jan-2018

Version 20

Changed

Configuration section updated

25-Sep-2017

Version 19

Changed

Configuration section updated

10-Mar-2017

Version 18

Changed

SKU descriptions and Accessories updated

20-Jan-2017

Version 17

Changed

Minor edits on Features and benefits

06-May-2016

Version 16

Changed

Edits made on Technical Specifications and Accessories.
SKU descriptions updated.

05-Feb-2016

Version 15

Changed

Minor edits made on Configuration section

01-Dec-2015

Version 14

Added

SKUs added: JE072B, JE073B, JE074B, JG091B, JG309B, JG310B

Changed

QuickSpecs name changed from HP 5120 SI Switch Series to HPE FlexNetwork 5120 SI Switch Series.

Product overview, Features and benefits, Configuration and Technical Specification sections updated.

01-Dec-2014

Version 13

Changed

Warranty and support updated

12-Nov-2013

Version 12

Added

Configuration were added.

18-Jul-2013

Version 11

Changed

Standards and protocols was revised.

16-Jul-2013

Version 10

Changed

Updated the specifications and description for JD118B.

10-Jun-2013

Version 9

Added

OM4 cables were added.

30-Mar-2012

Version 8

Changed

Model names and Features and benefits were revised.

20-Mar-2012

Version 7

Changed

Model names were revised.

01-Dec-2011

Version 5

Changed

Features and Benefits and Standards and Protocols were revised.

30-Sep-2011

Version 3

Added

Accessory Product Details was added.

16-Mar-2011

Version 2

Added

HP A5120-24G-PoE+ SI Switch and HP A5120-24G-PPoE+ SI Switch Models were added.

13-Sep-2010

Version 1

Created

Document creation