HPE FlexNetwork 3100 SI Switch Series: технические характеристики и документация

HPE FlexNetwork 3100 SI Switch Series

Models

HPE 3100 8 v2 SI Switch

JG221A

HPE 3100 16 v2 SI Switch

JG222A

HPE 3100 24 v2 SI Switch

JG223A

Key features

• Suitable for enterprise networks and MANs
• 8-, 16-, 24- 10/100 downlink ports.
• Gigabit Ethernet uplinks
• Link aggregation
• Small size with noise-free design

Product overview

The HPE FlexNetwork 3100 SI Switch Series is a low-cost Fast Ethernet switch line that enables organizations to do more with less. Stackable and affordable, this series comprises intelligent, network-manageable Layer 2 Fast Ethernet switches that offer high performance, high port density, and easy installation. These switches provide 10/100 Mbps downlinks and Gigabit Ethernet uplinks, and offer link aggregation that expands bandwidth and enhances connection reliability. In enterprise networks, they can serve as access devices for 100 Mbps-to-desktop applications. In metropolitan area networks (MANs) or industry networks, they can connect end users or aggregate low-end switches through 100 Mbps electrical interfaces in the downlink direction, converging at an IP switching center or a large-capacity Layer 3 switch in the uplink direction via a GbE interface or link aggregation.

Features and benefits

Quality of Service (QoS)

• Powerful QoS feature
  supports the following congestion actions: weighted round robin queuing and HQ+WRR
• Broadcast control
  allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic

Management

• Friendly port names
  allow assignment of descriptive names to ports
• Remote configuration and management
  is available through a secure Web browser or a CLI
• Manager and operator privilege levels
  enable read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces
• Command authorization
  leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents activity
• Secure Web GUI
  provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
• Multiple configuration files
  can be stored to the flash image
• Complete session logging
  provides detailed information for problem identification and resolution
• SNMPv1, v2c, and v3
  facilitate centralized discovery, monitoring, and secure management of networking devices
• Remote monitoring (RMON)
  uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private
  alarm extension group
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
  advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
• Management VLAN
  segments traffic to and from management interfaces, including CLI/Telnet, a Web browser interface, and SNMP
• Troubleshooting
  ingress and egress port monitoring enable network problem solving; virtual cable tests provide visibility into cable problems
• Stacking capability
  single IP address management for a stack of up to 16 switches

Connectivity

• Auto-MDIX
  automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
• Flow control
  provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations
• Gigabit Ethernet uplinks
  are dual-personality ports for either 10/100/1000 or mini-GBIC SFP connectivity for increased connectivity flexibility

Performance

• Gigabit Ethernet interface
  provides a connection to the network that eliminates the network as a bottleneck

Resiliency and high availability

• Separate data and control paths
  increase security and performance
• Spanning Tree/MSTP, RSTP
  provides redundant links while preventing network loops
• Port trunking
  provides higher switch-to-switch throughput and link-level redundancy, with support for standards-based link aggregation (IEEE 802.3ad)

Layer 2 switching

• 8K MAC addresses
  provide access to many Layer 2 devices
• VLAN support and tagging
  support IEEE 802.1Q with 4,094 simultaneous VLAN IDs
• GARP VLAN Registration Protocol
  allows automatic learning and dynamic assignment of VLANs
• Gigabit Ethernet port aggregation
  allows grouping of ports to increase overall data throughput to a remote device
• IEEE 802.1ad QinQ
  increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high-speed campus or metro network

Security

• IEEE 802.1X
  industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS erver
• MAC-based authentication
  client is authenticated with the RADIUS server based on the client's MAC address
• Secure management access
  securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
• Secure FTP
  allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
• Guest VLAN
  similar to IEEE 802.1X, it provides a browser-based environment to authenticated clients
• Port security
  allows access only to specified MAC addresses, which can be learned or specified by the administrator
• Port isolation
  secures and adds privacy, and prevents malicious attackers from obtaining user information
• STP BPDU port protection
  blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
• STP Root Guard
  protects the root bridge from malicious attacks or configuration mistakes
• RADIUS/HWTACACS
  eases switch management security administration by using a password authentication server
• HTTPS management
  provides secure Web management

Convergence

• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
  is an automated device discovery protocol that provides easy mapping of network management applications
• LLDP-MED
  is a standard extension that automatically configures network devices, including LLDP-capable IP phones
• IP multicast snooping (data-driven IGMP)
  automatically prevents flooding of IP multicast traffic
• Multicast VLAN
  allows multiple VLANs to receive the same multicast traffic, reducing network bandwidth demand by eliminating multiple streams to each VLAN

Flexibility

• Fanless design
  enables quiet operation for deployment in open spaces (selected models)

Additional information

• Green initiative support
  provides support for RoHS and WEEE regulations
• Green IT and power
  uses the latest advances in silicon development and shuts off unused ports to improve power efficiency

Warranty and support

• Limited Lifetime Warranty
  See http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
• Software releases
  to find software for your product, refer to http://www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary

HPE 3100 8 v2 SI Switch (JG221A)

Ports

1 dual-personality 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
8 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full
1 RJ-45 serial console port

Physical characteristics

Dimensions

9.06(w) x 6.3(d) x 1.72(h) in (23.01 x 16 x 4.37 cm) (1U height)

Weight

6.61 lb (3 kg)

Memory and processor

128 MB SDRAM, 16 MB flash; packet buffer size: 384 KB

Mounting

Requires angle mounting set if rack mounted (not included)

Performance

100 Mb Latency

< 6 µs

1000 Mb Latency

< 5 µs

Throughput

up to 2.7 million pps

Routing/Switching capacity

3.6 Gbps

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, non-condensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

5% to 95%, non-condensing

Electrical characteristics

Maximum heat dissipation

31 BTU/hr (32.71 kJ/hr)

Voltage

100 - 240 VAC, rated

(depending on power supply chosen)

Maximum power rating

9 W

Frequency

50/60 Hz

Notes

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

Management

IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE 3100 16 v2 SI Switch (JG222A)

Ports

2 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
16 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full
1 RJ-45 serial console port

Physical characteristics

Dimensions

14.17(w) x 6.3(d) x 1.72(h) in (35.99 x 16 x 4.37 cm) (1U height)

Weight

6.61 lb (3 kg)

Memory and processor

128 MB SDRAM, 16 MB flash; packet buffer size: 384 KB

Mounting

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)

Performance

100 Mb Latency

< 6 µs

1000 Mb Latency

< 5 µs

Throughput

5.4 million pps

Routing/Switching capacity

7.2 Gbps

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, non-condensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

5% to 95%, non-condensing

Electrical characteristics

Maximum heat dissipation

41 BTU/hr (43.26 kJ/hr)

Voltage

100 - 240 VAC, rated

(depending on power supply chosen)

Maximum power rating

12 W

Frequency

50/60 Hz

Notes

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

Management

IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE 3100 24 v2 SI Switch (JG223A)

Ports

2 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
24 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full
1 RJ-45 serial console port

Physical characteristics

Dimensions

17.32(w) x 6.3(d) x 1.72(h) in (43.99 x 16 x 4.37 cm) (1U height)

Weight

6.61 lb (3 kg)

Memory and processor

128 MB SDRAM, 16 MB flash; packet buffer size: 384 KB

Mounting

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)

Performance

100 Mb Latency

< 6 µs

1000 Mb Latency

< 5 µs

Throughput

6.6 million pps

Routing/Switching capacity

8.8 Gbps

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, non-condensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

5% to 95%, non-condensing

Electrical characteristics

Maximum heat dissipation

44 BTU/hr (46.42 kJ/hr)

Voltage

100 - 240 VAC, rated

(depending on power supply chosen)

Maximum power rating

13 W

Frequency

50/60 Hz

Notes

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003; ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

Management

IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

Standards and protocols
(applies to all products in series)

General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-X
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 951 BOOTP

MIBs
IEEE 8021-PAE-MIB
IEEE 8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
RFC 2233 Interface MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2618 RADIUS Authentication Client MIB
RFC 2620 RADIUS Accounting Client MIB
RFC 2665 Ethernet-Like-MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2819 RMON MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3826 AES for SNMP's USM MIB
RFC 4113 UDP MIB
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB

Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 1157 SNMPv1
RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)
ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)
SNMPv1/v2c/v3

HPE FlexNetwork 3100 SI Switch Series accessories

HPE 3100 8 v2 SI Switch (JG221A)

HPE 3100/4210 9 Rackmount Kit

JD322A

HPE 3100 16 v2 SI Switch (JG222A)

HPE 3100/4210 16 Rackmount Kit

JD321A

Date

Version History

Action

Description of Change:

30-Sep-2016

From Version 10 to 11

Changed

Document name updated.

01-August-2016

From Version 9 to 10

Changed

Adding #AC3 Option on Configuration section

27-May-2016

From Version 8 to 9

Changed

Product description updated.

01-Dec-2015

From Version 7 to 8

Changed

Overview and Technical Specifications updated

01-Dec-2014

From Version 6 to 7

Changed

Warranty and support updated

05-Oct-2012

From Version 5 to 6

Changed

Features and benefits was revised as were the listing of models (removed 3), and the weight and dimensions in each model specification.

15-Mar-2012

From Version 4 to 5

Changed

Features and benefits was revised and new Models and Accessories were added.

07-Nov-2011

From Version 3 to 4

Changed

The product name was updated throughout the document.

15-Apr-2011

From Version 2 to 3

Removed

Removed the remaining mentions of ProCurve from the QS.

07-Mar-2011

From Version 1 to 2

Changed

Accessories product descriptions and notes and services in Models were revised.