HPE FlexFabric 5820 Switch Series: технические характеристики и документация

HPE FlexFabric 5820 Switch Series

Models

HPE FlexFabric 5820X 14XG SFP+ 2-slot/1 OAA Slot Switch

JC106B

HPE FlexFabric 5820X 24XG SFP+ Switch

JC102B

HPE FlexFabric 5820AF 24XG Switch

JG219B

Key features

• For enterprise edge, or distribution/data center
• Up to 24-ports of 10GbE per unit/194 per stack
• Flex chassis—modular resiliency
• Cut-through switching for very low latency
• Hot-swappable I/O, power supplies, and fans

Product overview

The HPE FlexFabric 5820 Switch Series supports advanced features that deliver a unique combination of unmatched 10 Gigabit Ethernet; high-availability architecture; full Layer 2/3 dual-stack IPv4/IPv6; and line-rate, low-latency performance on all ports. Extensible embedded application capabilities enable these switches to integrate services into the network, consolidating devices and appliances to simplify deployment and reduce power consumption and rack space. Extremely versatile, the switches can be used in high-performance, high-density building or department cores as part of a consolidated network; for data center top-of-rack server access; or as high-performance Layer 3, 10GbE aggregation switches in campus and data center networks.

Features and benefits

Quality of Service (QoS)

• Powerful QoS feature
  creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR
• Integrated network services
  with support for open application architecture (OAA) modules, extends and integrates application capability into the network
• Ring Resiliency Protection Protocol (RRPP)
  provides fast recovery for ring Ethernet-based topology; helps ensure consistent application performance for applications such as VoIP

Management

• Remote configuration and management
  enables configuration and management through a secure Web browser or a CLI located on a remote device
• IEEE 802.1ab LLDP discovery
  advertises and receives management information from adjacent devices on a network
• USB support

- File copy
allows users to copy switch files to and from a USB flash drive

• DHCP options
  provides server (RFC 2131), client, snooping, and relay options
• SNMPv1, v2c, and v3
  facilitate centralized discovery, monitoring, and secure management of networking devices
• sFlow
  provides scalable ASIC-based network monitoring and accounting; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
• Network Time Protocol (NTP)
  synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all clock-dependent devices within the network so that the devices can provide diverse applications based on the consistent time

Connectivity

• High-density port connectivity
  194 10GbE ports with a 40 Gbps resilient backplane
• Auto-MDIX
  provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
• Jumbo frames
  on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster-recovery services
• IPv6 native support

- IPv6 host
enables switches to be managed and deployed at the IPv6 network's edge

- Dual stack (IPv4/IPv6)
transitions from IPv4 to IPv6, supporting connectivity for both protocols

- MLD snooping
forwards IPv6 multicast traffic to the appropriate interface

- IPv6 ACL/QoS
supports ACL and QoS for IPv6 network traffic, preventing traffic flooding

- IPv6 routing
supports IPv6 static routes and IPv6 versions of RIP, OSPF, IS-IS, and Border Gateway Protocol (BGP) routing protocols

Performance

• Hardware-based wire-speed access control lists (ACLs)
  helps provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation
• Unique versatile architecture
  supports the best of both fixed-port and modular configurations
• Cut-through switching
  delivers wire-speed, line-rate performance on all ports, as well as cut-through switching for low latency

Resiliency and high availability

• Data center-optimized design
  The HPE FlexFabric 5820AF 24XG Switch (JG219B) supports front-to-back/back-to-front airflow for hot/cold aisles, rear rack mounts, and redundant hot-swappable AC or DC power and fans.

Manageability

• Full-featured console
  provides complete control of the switch with a familiar CLI
• Web interface
  allows configuration of the switch from any Web browser on the network
• RMON and sFlow
  provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
• Multiple configuration files
  allow multiple configuration files to be stored to a flash image
• Troubleshooting

- Ingress and egress port monitoring
enable network problem solving

- Traceroute and ping
enable testing of network connectivity

- Virtual cable tests
provide visibility to cable problems

Layer 2 switching

• 32K MAC addresses
  provide access to many Layer 2 devices
• 4,094 port-based VLANs
  provide security between workgroups
• IEEE 802.1ad QinQ and Selective QinQ
  increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network
• Gigabit Ethernet port aggregation
  allows grouping of ports to increase overall data throughput to a remote device
• 10 GbE port aggregation
  allows grouping of ports to increase overall data throughput to a remote device
• Spanning Tree/MSTP, RSTP, and STP Root Guard
  prevent network loops
• sFlow
  allows traffic sampling
• GVRP VLAN Registration Protocol
  allows automatic learning and dynamic assignment of VLANs

Layer 3 services

• Address Resolution Protocol (ARP)
  determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
• Dynamic Host Configuration Protocol (DHCP)
  simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across subnets

Layer 3 routing

• Layer 3 IPv4 routing
  provides routing of IPv4 at media speed; supports static routes, RIP and RIPv2, OSPF, IS-IS, and BGP
• Routing Information Protocol (RIP) and RIPng support
  provides complete support of RIP for both IPv4 and IPv6
• OSPF and OSPFv3 support
  provides complete support of OSPF for both IPv4 and IPv6
• IS-IS and IS-ISv6 support
  provides complete support of IS-IS for both IPv4 and IPv6
• Layer 3 IPv6 routing
  provides routing of IPv6 at media speed; supports static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+
• Bidirectional Forwarding Detection (BFD)
  enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF
• Virtual Router Redundancy Protocol (VRRP) and VRRP Extended
  allow quick failover of router ports
• Policy-based routing
  makes routing decisions based on policies set by the network administrator
• IGMPv1, v2, and v3
  allow individual hosts to be registered on a particular VLAN
• PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6)
  support IP Multicast address management and inhibition of DoS attacks
• Equal-Cost Multipath (ECMP)
  enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth

Security

• Defense-in-depth security
  provides integrated and distributed security enforcement that can be managed from a central location, such as the HPE Intelligent Management Center (IMC)
• Advanced processor queuing mechanism
  helps prevent denial-of-service (DoS) attacks, while DHCP snooping helps ensure that devices can only receive an IP address from a legitimate DHCP server on the network
• RADIUS/HWTACACS
  eases switch management security administration by using a password authentication server
• Secure Shell (SSHv2)
  encrypts all transmitted data for secure, remote CLI access over IP networks
• IEEE 802.1X-based dynamic delivery of QoS, ACLs, and VLANs
  allows complete control over user network access
• Guest VLAN
  provides a browser-based environment to authenticated clients that is similar to IEEE 802.1X
• Port isolation
  secures and adds privacy, and prevents malicious attackers from obtaining user information
• Port security
  allows access only to specified MAC addresses, which can be learned or specified by the administrator
• MAC-based authentication
  allows or denies access to the switch based on a client MAC address
• IP Source Guard
  helps prevent IP spoofing attacks
• HTTPS management
  provides secure Web management
• Unicast Reverse Path Forwarding (URPF)
  limits malicious traffic on a network
• Multi-Customer Edge (MCE)-Multicast Virtual Routing and Forwarding (MVRF)
  provide MPLS Edge router support
• Public Key Infrastructure (PKI)
  is used to control access

Convergence

• Voice VLAN
  automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
• LLDP-MED
  is a standard extension that automatically configures network devices, including LLDP-capable IP phones
• Internet Group Management Protocol (IGMP)
  utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage IPv4 multicast networks; supports IGMPv1, v2, and v3
• Protocol Independent Multicast (PIM)
  defines modes of Internet multicasting to allow one-to-many and many-to-many transmission of information; supports PIM Dense Mode (DM), Sparse Mode (SM), and Source-Specific Multicast(SSM)

Monitor and diagnostics

• Port mirroring
  enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
• OAM (802.3ah)
  operations, administration and maintenance (OAM) management capability detects data link layer problems that occurred in the "last mile"; monitors the status of the link between the two devices
• CFD (802.1ag)
  connectivity fault detection (CFD) provides a Layer 2 link OAM (operations, administration, and maintenance) mechanism used for link connectivity detection and fault locatin

Additional information

• Intelligent Resilient Fabric (IRF)

- Creates virtual resilient switching fabrics, where two or more switches perform as a single Layer 2 switch and Layer 3 router

- Does not require switches to be co-located and allows them to be part of a disaster-recovery system

- Allows servers or switches to be attached using standard LACP for automatic load balancing and high availability

- Simplifies network operation by eliminating the complexity of Spanning Tree Protocol, ECMP, or VRRP

• OAA modules
  support wireless network management and high-performance security applications; leverage network infrastructure investment
• Green IT and power
  improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes variable-speed fans, reducing energy costs
• High scalability with IRF
  Hewlett Packard Enterprise (HPE) Intelligent Resilient Fabric (IRF) technology simplifies the architecture of server access networks; up to nine HPE 5820/5820AF stackable switches can be combined to deliver unmatched scalability of virtualized access layer switches and flatter, two-tier FlexFabric networks using IRF, which reduces cost and complexity

Warranty and support

• 1-year warranty
  see http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
• Software releases
  to find software for your product, refer to http://www.hpe.com/networking/support ; for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary

Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

Standard Switch Chassis

HPE FlexFabric 5820X 14XG SFP+ 2-slot/1 OAA Slot Switch

JC106B

• 4 RJ-45 autosensing 10/100/1000 ports
• 2 module slots
• 14 fixed 1000/10000 SFP+ ports
• min=0 \ max=14 SFP+ Transceivers
• 1 Power Supply Required
• 2U - Height

See Configuration NOTE:1

HPE FlexFabric 5820X 24XG SFP+ Switch

JC102B

• 4 RJ-45 autosensing 10/100/1000 ports
• 24 fixed 1000/10000 SFP+ ports
• min=0 \ max=24 SFP+ Transceivers
• 1 Power Supply Required
• 1U - Height

See Configuration NOTE:1

HPE FlexFabric 5820AF 24XG Switch

JG219B

• 4 RJ-45 autosensing 10/100/1000 ports
• 24 fixed 1000/10000 SFP+ ports
• min=0 \ max=24 SFP+ Transceivers
• 1 Power Supply Required
• 2 Fan Trays Required
• 1U - Height

See Configuration NOTE:1

Configuration Rules:

Note 1

The following Transceivers install into this Switch (Max = 14 or 24 depending on Switch) (Use #0D1 or #B01 if switch is CTO):

HPE X130 10G SFP+ LC SR Transceiver

JD092B

HPE X130 10G SFP+ LC LRM Transceiver

JD093B

HPE X130 10G SFP+ LC LR Transceiver

JD094B

HPE X130 10G SFP+ LC SR Data Center Transceiver

JL437A

HPE X130 10G SFP+ LC LRM Data Center Transceiver

JL438A

HPE X130 10G SFP+ LC LR Data Center Transceiver

JL439A

HPE X130 10G SFP+ LC ER 40km Transceiver

JG234A

HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HPE X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Campus-Cable

JH693A

HPE X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Campus-Cable

JH694A

HPE X240 10G SFP+ to SFP+ 3m Direct Attach Copper Campus-Cable

JH695A

HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

HPE X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HPE X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HPE X125 1G SFP LC LH70 Transceiver

JD063B

HPE X120 1G SFP LC SX Transceiver

JD118B

HPE X120 1G SFP LC LX Transceiver

JD119B

HPE X120 1G SFP RJ45 T Transceiver

JD089B

Box Level Integration CTO Models

CTO Solution SKU

HPE FlexFabric 58xx Configure-to-order Switch Solution

JG478A

• SSP trigger SKU

CTO Base SKU

HPE FlexFabric 5820X 14XG SFP+ 2-slot/1 OAA Slot Switch

JC106B

• 4 RJ-45 autosensing 10/100/1000 ports
• 2 module slots
• 14 fixed 1000/10000 SFP+ ports
• min=0 \ max=14 SFP+ Transceivers
• 1 Power Supply Required
• 2U - Height

See Configuration NOTE:1,4

HPE FlexFabric 5820X 24XG SFP+ Switch

JC102B

• 4 RJ-45 autosensing 10/100/1000 ports
• 24 fixed 1000/10000 SFP+ ports
• min=0 \ max=24 SFP+ Transceivers
• 1 Power Supply Required
• 1U - Height

See Configuration NOTE:1,4

HPE FlexFabric 5820AF 24XG Switch

JG219B

• 4 RJ-45 autosensing 10/100/1000 ports
• 24 fixed 1000/10000 SFP+ ports (min=0 \ max=24 SFP+ Transceivers)
• 1 Power Supply Required
• 2 Fan Trays Required
• 1U - Height

See Configuration NOTE:1,4

Configuration Rules:

Note 1

The following Transceivers install into this Switch (Max = 14 or 24 depending on Switch): (Use #0D1 if switch is CTO)

HPE X130 10G SFP+ LC SR Transceiver

JD092B

HPE X130 10G SFP+ LC LRM Transceiver

JD093B

HPE X130 10G SFP+ LC LR Transceiver

JD094B

HPE X130 10G SFP+ LC SR Data Center Transceiver

JL437A

HPE X130 10G SFP+ LC LRM Data Center Transceiver

JL438A

HPE X130 10G SFP+ LC LR Data Center Transceiver

JL439A

HPE X130 10G SFP+ LC ER 40km Transceiver

JG234A

HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HPE X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Campus-Cable

JH693A

HPE X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Campus-Cable

JH694A

HPE X240 10G SFP+ to SFP+ 3m Direct Attach Copper Campus-Cable

JH695A

HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

HPE X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HPE X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HPE X125 1G SFP LC LH70 Transceiver

JD063B

HPE X120 1G SFP LC SX Transceiver

JD118B

HPE X120 1G SFP LC LX Transceiver

JD119B

HPE X120 1G SFP RJ45 T Transceiver

JD089B

Note 4

If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis and integrated to the JG478A - HPE 58xx CTO Enablement. (Max 1 switch per SSP)

Rack Level Integration CTO Models

Standard Switch Chassis

HPE FlexFabric 5820X 14XG SFP+ 2-slot/1 OAA Slot Switch

JC106B

• 4 RJ-45 autosensing 10/100/1000 ports
• 2 module slots
• 14 fixed 1000/10000 SFP+ ports
• min=0 \ max=14 SFP+ Transceivers
• 1 Power Supply Required
• 2U - Height

See Configuration NOTE:1, 11

HPE FlexFabric 5820X 24XG SFP+ Switch

JC102B

• 4 RJ-45 autosensing 10/100/1000 ports
• 24 fixed 1000/10000 SFP+ ports
• min=0 \ max=24 SFP+ Transceivers
• 1 Power Supply Required
• 1U - Height

See Configuration NOTE:1, 11

HPE FlexFabric 5820AF 24XG Switch

JG219B

• 4 RJ-45 autosensing 10/100/1000 ports
• 24 fixed 1000/10000 SFP+ ports (min=0 \ max=24 SFP+ Transceivers)
• 1 Power Supply Required
• 2 Fan Trays Required
• 1U - Height

See Configuration NOTE:1, 11

Configuration Rules:

Note 1

The following Transceivers install into this Switch (Max = 14 or 24 depending on Switch):

HPE X130 10G SFP+ LC SR Transceiver

JD092B

HPE X130 10G SFP+ LC LRM Transceiver

JD093B

HPE X130 10G SFP+ LC LR Transceiver

JD094B

HPE X130 10G SFP+ LC SR Data Center Transceiver

JL437A

HPE X130 10G SFP+ LC LRM Data Center Transceiver

JL438A

HPE X130 10G SFP+ LC LR Data Center Transceiver

JL439A

HPE X130 10G SFP+ LC ER 40km Transceiver

JG234A

HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HPE X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Campus-Cable

JH693A

HPE X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Campus-Cable

JH694A

HPE X240 10G SFP+ to SFP+ 3m Direct Attach Copper Campus-Cable

JH695A

HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

HPE X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HPE X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HPE X125 1G SFP LC LH70 Transceiver

JD063B

HPE X120 1G SFP LC SX Transceiver

JD118B

HPE X120 1G SFP LC LX Transceiver

JD119B

HPE X120 1G SFP RJ45 T Transceiver

JD089B

Note 11

If HPE CTO Switch Chassis is selected for Rack Level Integration, Then the Switch needs to integrate (with #0D1) to the HPE Rack.

Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.

Modules

Ethernet Modules

(JC106x and JG259x Switch Only ) System (std 0 // max 2) User Selection (min 0 // max 2) per chassis

HPE 5800 4-port 10GbE SFP+ Module

JC091A

• min=0 \ max=4 SFP + Transceivers

See Configuration NOTE:1

HPE 5800 2-port 10GbE SFP+ Module

JC092B

• min=0 \ max=2 SFP + Transceivers

See Configuration NOTE:1

Configuration Rules:

Note 1

The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO)

HPE X130 10G SFP+ LC SR Transceiver

JD092B

HPE X130 10G SFP+ LC LRM Transceiver

JD093B

HPE X130 10G SFP+ LC LR Transceiver

JD094B

HPE X130 10G SFP+ LC SR Data Center Transceiver

JL437A

HPE X130 10G SFP+ LC LRM Data Center Transceiver

JL438A

HPE X130 10G SFP+ LC LR Data Center Transceiver

JL439A

HPE X130 10G SFP+ LC ER 40km Transceiver

JG234A

HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HPE X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Campus-Cable

JH693A

HPE X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Campus-Cable

JH694A

HPE X240 10G SFP+ to SFP+ 3m Direct Attach Copper Campus-Cable

JH695A

HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

Access Control Modules

(JC106x and JG259x Switch Only ) System (std 0 // max 1) User Selection (min 0 // max 1) per chassis

HP 5820 VPN Firewall Module

JD255A

• No Transceivers

See Configuration NOTE:1 

Configuration Rules:

Note 1

This Module only installs into the following switches:

HPE 5820X-14XG-SFP+ Switch w 2 Intf Slts

JC106x

HPE 5820X-14XG-SFP+ TAA Switch w 2 Slots

JG259x

Transceivers

SFP+ Transceivers

HPE X130 10G SFP+ LC SR Transceiver

JD092B

HPE X130 10G SFP+ LC LRM Transceiver

JD093B

HPE X130 10G SFP+ LC LR Transceiver

JD094B

HPE X130 10G SFP+ LC SR Data Center Transceiver

JL437A

HPE X130 10G SFP+ LC LRM Data Center Transceiver

JL438A

HPE X130 10G SFP+ LC LR Data Center Transceiver

JL439A

HPE X130 10G SFP+ LC ER 40km Transceiver

JG234A

HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

HPE X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Campus-Cable

JH693A

HPE X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Campus-Cable

JH694A

HPE X240 10G SFP+ to SFP+ 3m Direct Attach Copper Campus-Cable

JH695A

SFP Transceivers

HPE X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HPE X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HPE X120 1G SFP LC SX Transceiver

JD118B

HPE X120 1G SFP LC LX Transceiver

JD119B

HPE X125 1G SFP LC LH70 Transceiver

JD063B

HPE X120 1G SFP RJ45 T Transceiver

JD089B

Internal Power Supplies

System (std 0 // max 2) User Selection (min 1 // max 2) per switch enclosure

HPE 5800 300W DC Power Supply

JC090A

See Configuration NOTE:1, 2

HPE 5800 300W AC Power Supply

JC087A

• includes 1 x c13,  300w

See Configuration NOTE:1, 2, 3

PDU Cable NA/MEX/TW/JP

JC087A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

JC087A#B2C

• C15 PDU Jumper Cord (ROW)

HPE 58x0AF 650W AC Power Supply

JC680A

• includes 1 x c13,  650w

See Configuration NOTE:1, 3, 5

PDU Cable NA/MEX/TW/JP

JC680A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

JC680A#B2C

• C15 PDU Jumper Cord (ROW)

HP 58x0AF 650W DC Power Supply

JC681A

See Configuration NOTE:1, 5

HPE A58x0AF Back (Power Side) to Front (Port Side) Airflow 300W AC Power Supply

JG900A

• includes 1 x c13,  300w

See Configuration NOTE:1, 3, 5

PDU Cable NA/MEX/TW/JP

JG900A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

JG900A#B2C

• C15 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord

JG900A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

HPE A58x0AF Back (Power Side) to Front (Port Side) Airflow 300W DC Power Supply

JG901A

See Configuration NOTE:1, 5, 6

HPE FlexFabric Switch 650W 48V Hot Plug NEBS-compliant DC Power Supply

JH336A

See Configuration NOTE:1, 5

Configuration Rules:

Note 1

If 2 power supplies are selected they must be the same SKU number.

Note 2

Supported only on the  JC102B,  JC106B,  JG243B and  JG259B Switches

Note 3

Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable option on the Switches/Routers.

Note 5

Supported only on the  JG219B Switch

Note 6

Watson Only - Add "(NEBS)" after the description on the PS table.

Remarks:

Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord -  #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)

NOTE* Switch  JG219B should default selection of Power Supply as JC680A but allow selection of JG900A, JG901A, and JC681A.

Switch Options

Fan Trays

(JG219B only) System (std 0 // max 2) User Selection (min 2 // max 2) per switch

HPE 58x0AF Back (Power Side) to Front (Port Side) Airflow Fan Tray

JC682A

See Configuration NOTE:1

HPE 58x0AF Front (Port Side) to Back (Power Side) Airflow Fan Tray

JC683A

See Configuration NOTE:1

Configuration Rules:

Note 1

Fan Trays cannot be mixed in the same switch enclosure

Remarks:

Watson Blue Text:
If there is any empty space below the switch in a rack when using Back to Front Fan Trays, JC682A, the rack will receive an Air Plenum kit that takes up 1U of additional space in the rack. The Air Plenum kit is not required on fully configured racks. This only applies for CTO Rack Level Integration. The Air Plenum Kit is a non-saleable SKU, and is brought in automatically for CTO Factory Rack Level Integration.

Opacity Shield Kit

System (std 0 // max 1) User Selection (min 0 // max 1)

HPE 5800 24XG SFP+ Opacity Shield Kit

JG564A

• Supported on  JG243B

See Configuration NOTE:1

Configuration Rules:

Note 1

If selected with a CTO Switch Solution, Quantity 1 of JG585A#B01 must also be ordered.

Tamper Evidence Labels

System (std 0 // max 1) User Selection (min 0 // max 1)

HPE 12mm x 60mm Tamper Evidence (30) Labels

JG585A

• Supported on  JG243B

See Configuration NOTE:1

Configuration Rules:

Note 1

If selected with a CTO Switch Solution, Quantity 1 of JG564A#B01 must also be ordered.

External Redundant Power Supplies

HPE RPS1600 Redundant Power System

JG136A

• Height = 1U
• includes 1 x c13,  1600w and Power Supply port

See Configuration NOTE:2, 3, 5

HPE RPS1600 1600W AC Power Supply

JG137A

• Installs into JG136A only

See Configuration NOTE:1, 3

Configuration Rules:

Note 1

If this power supply is selected, The JG136A - HPE A-RPS1600 Redundant Power System must be on order or onsite.

Note 2

Localization required.

Note 3

Each switch will only support 1 JG136A and 1 JG137A Power supply systems.

Note 5

This power supply only supported on switches JC102B and JC106B.

 Options for the HPE RPS1600 Redundant Power System

HPE X290 1000 A JD5 2m RPS Cable

JD187A

See Configuration NOTE:3

HPE X290 1000 B JD5 2m RPS Cable

JD189A

See Configuration NOTE:4

Remarks:

These cables are used to connect the External Power System to Switch. 

Configuration Rules:

Note 3

HPE RPS1600 Redundant Power System (JG136A).

Note 4

HPE RPS1600 Redundant Power System (JG136A)

HPE FlexFabric 5820X 14XG SFP+ 2-slot/1 OAA Slot Switch (JC106B)

Ports

14 SFP+ 10-GbE ports; Duplex: full only

2 extended module slots

1 open module slot

4 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

1 RJ-45 serial console port

Supports a maximum of 14 SFP+ ports plus 8 8/4/2 Gbps Fibre Channel SFP+ ports, with optional module

Additional ports and slots

1 RJ-45 serial console port

Power supplies

2 power-supply slots

1 minimum power-supplies required (ordered separately)

Fan tray

includes: 1 x JC096A

1 fan tray slot

Base product includes fan tray

Physical characteristics

Dimensions

17.32(w) x 18.39(d) x 3.39(h) in (43.99 x 46.7 x 8.61 cm) (2U height)

Weight

33.29 lb (15.1 kg)

Memory and processor

2048 MB SDRAM; Packet buffer size: 2 MB, 512 MB flash

Performance

Latency

2.02 µs (Cut Through) 2.02 µs, (Store and Forward) (64-byte packets)

Throughput

up to 363 Mpps (64-byte packets)

Routing/Switching capacity

488 Gbps

Routing table size

12000 entries (IPv4)

MAC address table size

32000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, noncondensing

Acoustic

Low-speed fan: 44.3 dB, High-speed fan: 54.1 dB

Electrical characteristics

Maximum heat dissipation

836 BTU/hr (881.98 kJ/hr)

Voltage

100 - 120 / 200 - 240 VAC, rated

-48 to -60 VDC, rated

(depending on power supply chosen

Maximum power rating

300 W

Notes

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance

Emissions

VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

Immunity

Generic

ETSI EN 300 386 V1.3.3

EN

EN 55024:1998+ A1:2001 + A2:2003

ESD

EN 61000-4-2; IEC 61000-4-2

Radiated

EN 61000-4-3; IEC 61000-4-3

EFT/Burst

EN 61000-4-4; IEC 61000-4-4

Surge

EN 61000-4-5; IEC 61000-4-5

Conducted

EN 61000-4-6; IEC 61000-4-6

Power frequency magnetic field

IEC 61000-4-8; EN 61000-4-8

Voltage dips and interruptions

EN 61000-4-11; IEC 61000-4-11

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet; HTTPS; RMON1; FTP

Notes

The customer must order a power supply, as the device does not come with a PSU. At least one JC087A or JC090A is required.

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexFabric 5820X 24XG SFP+ Switch (JC102B)

Ports

24 SFP+ 10-GbE ports; Duplex: full only

4 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

Supports a maximum of 24 SFP+ ports plus 4 autosensing 10/100/1000 ports

Additional ports and slots

1 RJ-45 serial console port

Power supplies

2 power-supply slots

1 minimum power-supplies required (ordered separately)

Fan tray

includes: 1 x JC098A

1 fan tray slot

Base product includes fan tray

Physical characteristics

Dimensions

17.32(w) x 16.81(d) x 1.73(h) in (44.0 x 42.7 x 4.4 cm) (1U height)

Weight

18.74 lb (8.5 kg)

Memory and processor

2048 MB SDRAM; Packet buffer size: 2 MB, 512 MB flash

Performance

Latency

2.02 µs (Cut Through) 2.02 µs, (Store and Forward) (64-byte packets)

Throughput

up to 363 Mpps (64-byte packets)

Routing/Switching capacity

488 Gbps

Routing table size

12000 entries (IPv4)

MAC address table size

32000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, noncondensing

Acoustic

Low-speed fan: 48.4 dB, High-speed fan: 59.7 dB

Electrical characteristics

Maximum heat dissipation

631 BTU/hr (665.71 kJ/hr)

Voltage

100 - 120 / 200 - 240 VAC, rated

-48 to -60 VDC, rated
(depending on power supply chosen)

Maximum power rating

300 W

Notes

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance

Emissions

VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

Immunity

Generic

ETSI EN 300 386 V1.3.3

EN

EN 55024:1998+ A1:2001 + A2:2003

ESD

EN 61000-4-2; IEC 61000-4-2

Radiated

EN 61000-4-3; IEC 61000-4-3

EFT/Burst

EN 61000-4-4; IEC 61000-4-4

Surge

EN 61000-4-5; IEC 61000-4-5

Conducted

EN 61000-4-6; IEC 61000-4-6

Power frequency magnetic field

IEC 61000-4-8; EN 61000-4-8

Voltage dips and interruptions

EN 61000-4-11; IEC 61000-4-11

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet; HTTPS; RMON1; FTP

Notes

The customer must order a power supply, as the device does not come with a PSU. At least one JC087A or JC090A is required.

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE FlexFabric 5820AF 24XG Switch (JG219B)

Ports

24 fixed 1000/10000 SFP+ ports

2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Additional ports and slots

1 RJ-45 serial console port
1 RJ-45 out-of-band management port
1 USB 2.0

Power supplies

2 power-supply slots

1 minimum power-supplies required (ordered separately)

Fan tray

2 fan tray slots

The customer must order fan trays, as fan trays are not included with the switch. This system requires two same-direction airflow fan trays to function properly. The system should not be operated with only one fan tray for more than 24 hours. The system should not be operated without a fan tray more than two minutes. The system should not be operated outside of the temperature range of 32°F (0°C) to 113°F (45°C). Failure to comply with these operating requirements may void the product warranty.

Physical characteristics

Dimensions

25.98(w) x 17.32(d) x 1.72(h) in (65.99 x 43.99 x 4.37 cm) (1U height)

Weight

22.05 lb (10 kg), Fully loaded

Memory and processor

2048 MB flash; Packet buffer size: 2 MB, 512 MB SDRAM

Performance

Latency

3 µs(64-byte packets)

Throughput

up to 360 Mpps

Routing/Switching capacity

484 Gbps

Routing table size

12000 entries (IPv4)

MAC address table size

32000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 90%, noncondensing

Acoustic

Low-speed fan: 60.1 dB, High-speed fan: 69.9 dB

Electrical characteristics

Maximum heat dissipation

607 BTU/hr (640.39 kJ/hr)

Voltage

100 - 120 / 200 - 240 VAC, rated

-48 to -60 VDC, rated
(depending on power supply chosen)

Maximum power rating

650 W

Notes

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance

Emissions

VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

Immunity

Generic

ETSI EN 300 386 V1.3.3

EN

EN 55024:1998+ A1:2001 + A2:2003

ESD

EN 61000-4-2; IEC 61000-4-2

Radiated

EN 61000-4-3; IEC 61000-4-3

EFT/Burst

EN 61000-4-4; IEC 61000-4-4

Surge

EN 61000-4-5; IEC 61000-4-5

Conducted

EN 61000-4-6; IEC 61000-4-6

Power frequency magnetic field

IEC 61000-4-8; EN 61000-4-8

Voltage dips and interruptions

EN 61000-4-11; IEC 61000-4-11

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet; HTTPS; RMON1; FTP

Notes

The customer must order power supply, as the device does not come with a PSU. At least one JC680A or JC681A is required

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

Standards and protocols
(applies to all products in series)

General protocols
IEEE 802.1ag Service Layer OAM

IEEE 802.1D MAC Bridges

IEEE 802.1p Priority

IEEE 802.1Q VLANs

IEEE 802.1s (MSTP)

IEEE 802.1v VLAN classification by Protocol and Port

IEEE 802.1w Rapid Reconfiguration of Spanning Tree

IEEE 802.3ad Link Aggregation Control Protocol (LACP)

IEEE 802.3ae 10-Gigabit Ethernet

IEEE 802.3x Flow Control

RFC 768 UDP

RFC 792 ICMP

RFC 793 TCP

RFC 826 ARP

RFC 854 TELNET

RFC 925 Multi-LAN Address Resolution

RFC 951 BOOTP

RFC 1058 RIPv1

RFC 1350 TFTP Protocol (revision 2)

RFC 1519 CIDR

RFC 1542 BOOTP Extensions

RFC 2131 DHCP

RFC 2453 RIPv2

RFC 3046 DHCP Relay Agent Information Option

RFC 3576 Ext to RADIUS (CoA only)

RFC 3768 VRRP

RFC 4675 RADIUS VLAN & Priority

RFC3323 A Privacy Mechanism for the Session Initiation Protocol (SIP)

802.1r - GARP Proprietary Attribute Registration Protocol (GPRP)

IP multicast
RFC 2934 Protocol Independent Multicast MIB for
IPv4
RFC 3376 IGMPv3 (host joins only)
RFC 3618 Multicast Source Discovery Protocol
(MSDP)
RFC 3973 Draft 2 PIM Dense Mode
RFC 4601 Draft 10 PIM Sparse Mode

IPv6
RFC 2080 RIPng for IPv6
RFC 2460 IPv6 Specification
RFC 2710 Multicast Listener Discovery (MLD) for
IPv6
RFC 2740 OSPFv3 for IPv6
RFC 2925 Remote Operations MIB (Ping only)
RFC 3019 MLDv1 MIB
RFC 3162 RADIUS and IPv6
RFC 3315 DHCPv6 (client and relay)
RFC 3315 DHCPv6 (client only)
RFC 3810 MLDv2 (host joins only)
RFC 4022 MIB for TCP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH

RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Auto-configuration

MIBs
IEEE8021-PAE-MIB
IEEE8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1657 BGP-4 MIB
RFC 1724 RIPv2 MIB
RFC 1850 OSPFv2 MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
RFC 2233 Interface MIB
RFC 2273 SNMP-NOTIFICATION-MIB
RFC 2452 IPV6-TCP-MIB
RFC 2454 IPV6-UDP-MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2688 MAU-MIB
RFC 2787 VRRP MIB
RFC 2819 RMON MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3621 Power Ethernet MIB
RFC 3826 AES for SNMP's USM MIB
RFC 4133 Entity MIB (Version 3)
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB

Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2
(history), 3 (alarm) and 9 (events)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3

OSPF
RFC 2328 OSPFv2
RFC 3101 OSPF NSSA

Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2865 RADIUS (client only)
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
SSHv2 Secure Shell

HPE FlexFabric 5820 Switch Series accessories

Transceivers

HPE X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HPE X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HPE X125 1G SFP LC LH70 Transceiver

JD063B

HPE X120 1G SFP RJ45 T Transceiver

JD089B

HPE X120 1G SFP LC SX Transceiver

JD118B

HPE X120 1G SFP LC LX Transceiver

JD119B

HPE X130 10G SFP+ LC SR Transceiver

JD092B

HPE X130 10G SFP+ LC LRM Transceiver

JD093B

HPE X130 10G SFP+ LC LR Transceiver

JD094B

HPE X130 10G SFP+ LC ER 40km Transceiver

JG234A

HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable

JG329A

HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable

JG330A

HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable

JG331A

Cables

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable

QK732A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable

QK733A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable

QK734A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable

QK735A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable

QK736A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable

QK737A

Power Supply

HPE RPS1600 Redundant Power System

JG136A

HPE RPS1600 1600W AC Power Supply

JG137A

HPE FlexFabric 5820X 24XG SFP+ Switch (JC102B)

HPE 5800 300W AC Power Supply

JC087A

HPE 5800 300W DC Power Supply

JC090A

HPE 5800 1RU Spare Fan Assembly

JC098A

HPE FlexFabric 5820X 14XG SFP+ 2-slot/1 OAA Slot Switch (JC106B)

HPE 5800 4-port 10GbE SFP+ Module

JC091A

HPE 5800 2-port 10GbE SFP+ Module

JC092B

HPE 5800 300W AC Power Supply (JC087A)

HPE 5800 300W DC Power Supply

JC090A

HPE 5800 2RU Spare Fan Assembly

JC096A

HPE 5820 VPN Firewall Module

JD255A

HPE FlexFabric 5820AF 24XG Switch (JG219B)

HPE 58x0AF 650W AC Power Supply

JC680A

HPE 58x0AF 650W DC Power Supply

JC681A

HPE 58x0AF Back (Power Side) to Front (Port Side) Airflow Fan Tray

JC682A

HPE 58x0AF Front (Port Side) to Back (Power Side) Airflow Fan Tray

JC683A

NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.

HPE X125 1G SFP LC LH40 1310nm Transceiver (JD061A)

A small form-factor pluggable SFP Gigabit LH40 transceiver that provides a full duplex Gigabit solution up to 40km on a single-mode fiber.

Ports

1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type

LC

Wavelength

1310 nm

Physical characteristics

Dimensions

2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)

Full configuration weight

0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical

0.8 W

Power consumption maximum

1.0 W

Cabling

Cable type:
Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

• 40km distance

Fiber type

Single Mode

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE X120 1G SFP LC LH40 1550nm Transceiver (JD062A)

A small form-factor pluggable (SFP) Gigabit LH40 transceiver that provides a full-duplex Gigabit solution up to 40 km on a single mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type

LC

Wavelength

1550 nm

Physical characteristics

Dimensions

2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)

Full configuration weight

0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical

0.8 W

Power consumption maximum

1.0 W

Cabling

Cable type:
Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

• 40km distance

Fiber type

Single Mode

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE X125 1G SFP LC LH70 Transceiver (JD063B)

A small form-factor pluggable (SFP) Gigabit LH70 transceiver that provides a full-duplex Gigabit solution up to 70km on a single-mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)

Connectivity

Connector type

LC

Wavelength

1550 nm

Physical characteristics

Dimensions

2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)

Full configuration weight

0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical

0.8 W

Power consumption maximum

1.0 W

Cabling

Cable type:
Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:
70km

Fiber type

Single Mode

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE X120 1G SFP RJ45 T Transceiver (JD089B)

A small form factor pluggable (SFP) Gigabit 1000Base-T transceiver that provides a full duplex Gigabit solution up to 100m on a Cat-5+ cable.

Ports

1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)

Connectivity

Connector type

RJ-45

Physical characteristics

Dimensions

2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)

Full configuration weight

0.07 lb. (0.03 kg)

Electrical characteristics

Power consumption typical

0.8 W

Power consumption maximum

1.0 W

Cabling

Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T;

Maximum distance:
100m

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE X120 1G SFP LC SX Transceiver (JD118B)

A small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550m on a Multimode fiber.

Ports

1 LC 1000BASE-SX port

Connectivity

Connector type

LC

Wavelength

850 nm

Physical characteristics

Dimensions

2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)

Full configuration weight

0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical

0.8 W

Power consumption maximum

1.0 W

Cabling

Maximum distance:
FDDI Grade distance = 220m
OM1 = 275m
OM2 = 500m
OM3 = Not Specified by standard

Cable length

up to 550m

Fiber type

Multi Mode

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE X120 1G SFP LC LX Transceiver (JD119B)

A small form-factor pluggable (SFP) Gigabig LX transceiver that provides a full duplex Gigabit solution up to 550m on MMF or 10Km on SMF

Ports

1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)

Connectivity

Connector type

LC

Wavelength

1300 nm

Physical characteristics

Dimensions

2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm)

Full configuration weight

0.04 lb. (0.02 kg)

Electrical characteristics

Power consumption typical

0.8 W

Power consumption maximum

1.0 W

Cabling

Cable type:
Either single mode or multimode;

Maximum distance:
550m for Multimode
10km for Singlemode

Fiber type

Both

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE RPS1600 Redundant Power System (JG136A)

Ports

8 redundant power supply ports
Restrictions: two -56V/25A DC(PoE); six -56V/8A DC(non-PoE)

Physical characteristics

Dimensions

15.63(d) x 17.32(w) x 1.74(h) in. (39.7 x 44 x 4.42 cm)

Weight

14.11 lb. (6.4 kg)

Full configuration weight

16.75 lb. (7.6 kg)

Environment

Operating temperature

14°F to 122°F (-10°C to 50°C)

Operating relative humidity

5% to 95%

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%

Altitude

up to 13,123 ft. (4 km)

Acoustic

Pressure: 53 dB; ISO 7779, ISO 9296

Electrical characteristics

Voltage

100-120/200-240 VAC

Current

30/60 A

Idle power

38 W

Maximum power rating

3550 W

RPS power

3200 W

PoE power

2800 W

RPS

-55 V

PoE

-55 V

Frequency

50/60 Hz

Notes

Idle power is the actual power consumption of the device with no ports connected.
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
With one RPS1600 Power Supply, the PRS1600 Redundant Power System can provide 1600W power output; With two PRS1600 Power Supplies, the output power is 3200W.

Safety

CE Labeled; UL 60950-1; IEC 60950-1; ICES-003; FCC Part 15, Subpart B; EU RoHS Compliant; EN 60950-1/A11; C-Tick; VCCI Class A; ROHS Compliance; EN 300386

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE RPS1600 1600W AC Power Supply (JG137A)

Physical characteristics

Dimensions

8.19(d) x 4.96(w) x 1.63(h) in. (20.8 x 12.6 x 4.15 cm)

Weight

3.02 lb. (1.37 kg)

Environment

Operating temperature

14°F to 122°F (-10°C to 50°C)

Operating relative humidity

5% to 95%

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%

Electrical characteristics

Voltage

100-120/200-240 VAC

Current

15/30 A

Maximum power rating

1600 W

Frequency

50/60 Hz

Notes

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP 5820 VPN Firewall Module (JD255A)

Ports

2 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

2 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP

1 RJ-45 serial console port

1 Compact Flash port

Physical characteristics

Dimensions

9.84(d) x 9.84(w) x 14.45(h) in. (25 x 25 x 36.7 cm)

Weight

7.72 lb. (3.5 kg)

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 95%, noncondensing

Management

IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; Telnet; HTTPS; RMON1; FTP

Features

Performance
- 6.5Gbps Firewall Throughput
- 1.8M Concurrent connection
- 50K New connection per second
- Max 20480 security policies
- 2Gbps 3DES/AES VPN Throughput
- 5000 IPSec tunnel
- 4K VLAN
Firewall operation mode
- Routing mode
- Transparent mode
- Hybrid mode
AAA service
- Local Authentication
- Standard Radius
- HWTACACS+
- RADIUS domain Authentication
ASPF
- General TCP / UDP application
- FTP/SMTP/HTTP/RTSP/H323 Protocol State Detection
- SIP/MGCP/QQ/MSN Protocol State Detection
- Java/ActiveX Blocking and Detection
- Port mapping
- Support for the fragmented packets
Virtualization
- 256 Virtual Firewall
- 4 default Security Zone
- Max 256 Security Zone
NAT
- NAPT
- PAT
- NAT Server
- Port mapping
- Bidirectional NAT
- Static NAT
Network Security
- Add blacklist by hand or automatically
- IP+MAC Binding
- ARP Reverse Query
- ARP Cheat Check
- Management ports closed by default
DDOS
- DNS Query Flood
- SYN Flood
- Auto start TCP Proxy when Detect SYN Flood
- ICMP Flood
- UDP Flood
- IP Spoofing
- SQL injection filter
L2TP VPN
- LNS,LAC
- L2TP Multi-instance
GRE
- GRE tunneling protocol
IPSec
- AH/ESP
- ESP
- Transport/tunnel
- NAT traversal
- Strategy template
IKE
- DH
- Pre-share Key authentication-method
- Support aggressive mode and main exchange mode
- IKE DPD, PKI / CA
Network Feature
- 802.1q VLAN
- 4K sub-interface
- Static and dynamic ARP
- Multicast, PIM
- IGMP v1/v2/v3
Routing
- RIP
- OSPF
- BGP
- Static Route
- policy Route
High Availability
- Active/Active mode
- Active/Passive mode
- Session Synchronization for Firewall
System management
- Web Management support IE/Firefox
- Command line interface (Console/Telnet/SSH)
- Classification Manager
- Unified management through iMC
- SNMPv1/v2c/v3
Administration
- Software Upgrades
- Configuration Backup and Restore
Logging/Monitoring
- Syslog
- Mini RMON
- NTP
- NAT/ASPF/firewall log stream(Binary log)
IPv6 Routing & Multicast
- RIPng
- OSPFv3
- BGP4+
- Static Route
- Policy Route
- PIM-SM/DM
IPv6 Security
- NAT-PT
- Manual tunnel
- IPV6 OVER ipv4 GRE tunnel
- 6to4 tunnel (RFC3056)
- ISATAP Tunnel
- IPv6 Packet Filter
- Radius
- NAT64

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

Standards and protocols

IPv6
RFC 1981 IPv6 Path MTU Discovery
RFC 2460 IPv6 Specification
RFC 2465 Management Information Base for IP
Version 6: Textual Conventions and General
Group(partially support, only "IPv6 Interface
Statistics table")
RFC 3484 Default Address Selection for IPv6
RFC 3513 IPv6 Addressing Architecture
RFC 3587 IPv6 Global Unicast Address Format
RFC 4007 IPv6 Scoped Address Architecture
RFC 4862 IPv6 Stateless Address Auto-configuration

Security
RFC 1321 The MD5 Message-Digest Algorithm
RFC 1334 PPP Authentication Protocols (PAP)
RFC 1994 PPP Challenge Handshake Authentication
Protocol (CHAP)
RFC 2104 Keyed-Hashing for Message
Authentication
RFC 2138 RADIUS Authentication
RFC 2618 RADIUS Authentication Client MIB
RFC 2620 RADIUS Accounting Client MIB
RFC 2716 PPP EAP TLS Authentication Protocol
RFC 2865 RADIUS Authentication
RFC 2866 RADIUS Accounting
RFC 2867 RADIUS Accounting Modifications for
Tunnel Protocol Support
RFC 2868 RADIUS Attributes for Tunnel Protocol
Support
RFC 2869 RADIUS Extensions
draft-grant-tacacs-02 (TACACS)

VPN
RFC 1701 Generic Routing Encapsulation (GRE)
RFC 1702 Generic Routing Encapsulation over IPv4
networks.
RFC 1828 IP Authentication using Keyed MD5
RFC 1829 The ESP DES-CBC Transform
RFC 1853 IP in IP Tunneling
RFC 2085 HMAC-MD5 IP Authentication with
Replay Prevention
RFC 2401 Security Architecture for the Internet
Protocol
RFC 2402 IP Authentication Header
RFC 2403 The Use of HMAC-MD5-96 within ESP
and AH
RFC 2404 The Use of HMAC-SHA-1-96 within ESP
and AH

RFC 2405 The ESP DES-CBC Cipher Algorithm With
Explicit IV
RFC 2406 IP Encapsulating Security Payload (ESP)
RFC 2410 The NULL Encryption Algorithm and Its
Use With IPsec
RFC 2411 IP Security Document Roadmap
RFC 2451 The ESP CBC-Mode Cipher Algorithms
RFC 2473 Generic Packet Tunneling in IPv6
Specification
RFC 2529 Transmission of IPv6 over IPv4 Domains
without Explicit Tunnels
RFC 2661 Layer Two Tunneling Protocol "L2TP"
RFC 2784 Generic Routing Encapsulation (GRE)
RFC 2868 RADIUS Attributes for Tunnel Protocol
Support
RFC 2893 Transition Mechanisms for IPv6 Hosts
and Routers
RFC 3602 The AES-CBC Cipher Algorithm and Its
Use with IPsec
RFC 4214 Intra-Site Automatic Tunnel Addressing
Protocol (ISATAP)

IKEv1
RFC 2407 The Internet IP Security Domain of
Interpretation for ISAKMP
RFC 2408 Internet Security Association and Key
Management Protocol (ISAKMP).
RFC 2409 The Internet Key Exchange (IKE)
RFC 2412 The OAKLEY Key Determination Protocol
RFC 3526 More Modular Exponential (MODP)
Diffie-Hellman groups for Internet Key Exchange
(IKE)
RFC 3706 A Traffic-Based Method of Detecting
Dead Internet Key Exchange (IKE) Peers

PKI
RFC 2510 Internet X.509 Public Key Infrastructure
Certificate Management Protocols
RFC 2511 Internet X.509 Certificate Request
Message Format
RFC 3279 Algorithms and Identifiers for the Internet
X.509 Public Key Infrastructure Certificate and
Certificate Revocation List (CRL) Profile
RFC 3280 Internet X.509 Public Key Infrastructure
Certificate and Certificate Revocation List (CRL)
Profile
draft-nourse-scep-06:
PKCS#1
PKCS#10
PKCS#12
PKCS#7

HPE 5820 4-port 8/4/2 Gbps FCoE SFP+ Module (JC530A)

Physical characteristics

Dimensions

8.27(d) x 6.3(w) x 1.46(h) in. (21 x 16 x 3.7 cm)

Weight

1.65 lb. (0.75 kg)

Full configuration weight

2.76 lb. (1.25 kg)

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

5% to 95%

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

5% to 95%

Shock and vibration

halt 30g rms

Altitude

up to 13,123 ft. (4 km)

Notes

FCoE Features
FCoE Compliance: Fibre Channel on Ethernet (FC-BB-5)/ IETF RFC 3643 draft standard
FCoE Support: FIP FCoE initialization protocol/ FIP snooping/ Auto negotiation, full-duplex FC operation/ NPIV transparent connections to FC fabrics
Ethernet Interface Compliance/Support: 10Gbps XAUI ports x 4 (internal)/ ETS - Enhanced transmission Selection (802.1Qaz)/ PFC - Class-based Flow Control (802.1Qbb)/ DCBX (802.1Qbb)
Electrical: Connected and Activity LED controls in Ethernet mode
Fibre Channel Standards: Physical Interface (FC-PI-3)/ Line Services (FC LS)/ Framing & Signaling (FC-FS-2)/ Virtual Interface Architecture Mapping (FC-VI)
Fibre Channel Standards Continued.: Fabric Element MIB Specification (RFC 2837)/ Fibre Alliance MIB Specification (Version 4.0)/ Methodologies for Interconnects (FC-MI-2)/ Device Attach (FC-DA)
Fibre Channel Classes of Service: Class 2/ Class 3/ Class F (inter-switch frames) connectionless Fibre Channel protocol support
NPIV support:FC-DA-2/ FC-MT/ FC-FS clause 5.2.41/ FC-LS table 141 clause 5.2.41/ 04-075v0/ 03-184v1/ 03-046
External Customer Interfaces: Four external SFP+ Flex Ports which configure to assume either of the following identities/ 10 Gigabit Converged Enhanced Ethernet (CEE)/ 8/4/2 Gbps Fibre Channel
External Customer Interfaces Continued: RJ-45 Ethernet management port/ Unit power and system status LEDs/ Port login and activity LEDs/Recessed reset switch
Media Support - Fibre Channel: Hot-pluggable/ 3.3 volt 8Gb SFP+ transceivers/ Also compatible with 4-Gbps and 2-Gbps SFPs/ Shortwave/ longwave optical
Media Support - Ethernet: Hot-pluggable, 3.3 volt 10 Gigabit SFP+ transceivers/ TwinAx copper cables
Other Features: SMI-S 1.1 support in firmware/ SAN boot support/Advanced Security (RADIUS, SSH, SSL)
Diagnostics: Telnet/ Web browser interface/ SNMP (status only)/ Telnet/ CLI/ Web browser interface/ API interface
Software/ Firmware Management Interfaces: Simple Network Management Protocol (SNMP)/ Management Information Base (MIB)/ CIM Provider/ Telnet/ CLI/Web Browser Management Interface/ API Interface
Safety: USA/ Canada/ EU/ Australia/ New Zealand/ China

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP 5800 Access Controller Module for 64-256 Access Points (JD441A)

Ports

1 RJ-45 out-of-band management port

Physical characteristics

Dimensions

9.57(d) x 9.84(w) x 1.38(h) in. (24.3 x 25 x 3.5 cm)

Weight

3.64 lb. (1.65 kg)

Memory and processor

Processor

Eight core @ 1000 MHz, 1 GB compact flash, 2 GB DDR2 SDRAM

Performance

Switch fabric speed

8 Gbps

MAC address table size

8,000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

5% to 95%, non-condensing

Non-operating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity

5% to 95%, non-condensing

Electrical characteristics

Maximum heat dissipation

273 BTU/hr (288.02 kJ/hr)

Maximum power rating

80 W

Safety

UL 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; GOST; C-Tick; NOM; IEC 60950-1(with CB report)

Emissions

EN 55022; VCCI; ICES-003; AS/NZS CISPR 22; EN 300 386; FCC Part 15; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC

Immunity

EN

EN 61000-4-2:1995+A1:1998+A2:2001; EN 61000-4-3:2006; EN 61000-4-4:2004; EN 61000-4-5:2006; EN 61000-4-6: 1996 +A1:2001:A2:2007; EN 61000-4-8:2001; EN 61000-4-11:2004; EN 55024:1998+ A1:2001 + A2:2003

Management

IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; SNMP Manager; Telnet; HTTPS; RMON1; FTP; in-line and out-of-band; IEEE 802.3 Ethernet MIB; Ethernet Interface MIB

Notes

Max. number of users: 4K. Max. number of users that are supported by local authentication: 1K. Max. number of SSIDs that can be configured: 256. Max. number of users that are supported by local portal authentication: 2K. Number of ACLs: 8K.

Services

Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

Standards and protocols

General protocols
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 855 Telnet Option Specification
RFC 858 Telnet Suppress Go Ahead Option
RFC 894 IP over Ethernet
RFC 950 Internet Standard Subnetting Procedure
RFC 959 File Transfer Protocol (FTP)
RFC 1122 Host Requirements
RFC 1141 Incremental updating of the Internet
checksum
RFC 1144 Compressing TCP/IP headers for
low-speed serial links
RFC 1256 ICMP Router Discovery Protocol (IRDP)
RFC 1321 The MD5 Message-Digest Algorithm
RFC 1334 PPP Authentication Protocols (PAP)
RFC 1350 TFTP Protocol (revision 2)
RFC 1812 IPv4 Routing
RFC 1944 Benchmarking Methodology for Network
Interconnect Devices
RFC 1994 PPP Challenge Handshake Authentication
Protocol (CHAP)
RFC 2104 HMAC: Keyed-Hashing for Message
Authentication
RFC 2246 The TLS Protocol Version 1.0
RFC 2284 EAP over LAN
RFC 2644 Directed Broadcast Control
RFC 2864 The Inverted Stack Table Extension to the
Interfaces Group MIB
RFC 2866 RADIUS Accounting
RFC 2869 RADIUS Extensions
RFC 3268 Advanced Encryption Standard (AES)
Ciphersuites for Transport Layer Security (TLS)
RFC 3619 Ethernet Automatic Protection Switching
(EAPS)
draft-ietf-capwap-protocol-specification-00.txt:CAPW
AP Protocol Specification
draft-ohara-capwap-lwapp-03.txt:Light Weight
Access Point Protocol

IP multicast
RFC 1112 IGMP
RFC 2236 IGMPv2
RFC 2934 Protocol Independent Multicast MIB for
IPv4

IPv6
RFC 1350 TFTP
RFC 1881 IPv6 Address Allocation Management
RFC 1887 IPv6 Unicast Address Allocation
Architecture
RFC 1981 IPv6 Path MTU Discovery
RFC 2292 Advanced Sockets API for IPv6
RFC 2373 IPv6 Addressing Architecture
RFC 2375 IPv6 Multicast Address Assignments
RFC 2460 IPv6 Specification
RFC 2461 IPv6 Neighbor Discovery
RFC 2462 IPv6 Stateless Address Auto-configuration
RFC 2463 ICMPv6
RFC 2464 Transmission of IPv6 over Ethernet
Networks
RFC 2526 Reserved IPv6 Subnet Anycast Addresses
RFC 2563 ICMPv6
RFC 2925 Definitions of Managed Objects for
Remote Ping, Traceroute, and Lookup Operations
(Ping only)
RFC 3484 Default Address Selection for IPv6
RFC 3587 IPv6 Global Unicast Address Format
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Auto-configuration
RFC 5095 Deprecation of Type 0 Routing Headers
in IPv6

MIBs
RFC 1229 Interface MIB Extensions
RFC 1643 Ethernet MIB
RFC 1757 Remote Network Monitoring MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2012 SNMPv2 MIB for TCP
RFC 2013 SNMPv2 MIB for UDP
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2613 SMON MIB
RFC 2863 The Interfaces Group MIB
RFC 2932IP (Multicast Routing MIB)
RFC 2933 IGMP MIB

Mobility
IEEE 802.11a High Speed Physical Layer in the 5
GHz Band
IEEE 802.11b Higher-Speed Physical Layer
Extension in the 2.4 GHz Band
IEEE 802.11d Global Harmonization
IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band
IEEE 802.11i Medium Access Control (MAC)
Security Enhancements
IEEE 802.11n WLAN Enhancements for Higher
Throughput

Network management
RFC 1155 Structure of Management Information
RFC 1905 SNMPv2 Protocol Operations
RFC 2573 SNMPv3 Applications
RFC 2574 SNMPv3 User-based Security Model
(USM)
RFC 2575 VACM for SNMP
SNMPv1/v2c

QoS/CoS
RFC 2474 DS Field in the IPv4 and IPv6 Headers
RFC 2475 DiffServ Architecture
RFC 3168 The Addition of Explicit Congestion
Notification (ECN) to IP

Security
IEEE 802.1X Port Based Network Access Control
RFC 3394 Advanced Encryption Standard (AES)
Key Wrap Algorithm
RFC 3579 RADIUS Support For Extensible
Authentication Protocol (EAP)
Access Control Lists (ACLs)
Guest VLAN for 802.1x
MAC Authentication
Secure Sockets Layer (SSL)
SSHv1.5 Secure Shell
SSHv2 Secure Shell
Web Authentication
WPA (Wi-Fi Protected Access)/WPA2

IKEv1
RFC 3748 - Extensible Authentication Protocol (EAP)

Date

Version History

Action

Description of Change

01-Oct-2018

Version 32

Changed

Recommended and Extended markings removed from the document.

04-Sep-2018

Version 31

Changed

QuickSpecs updated with the current Recommended-Extended Options

18-Apr-2017

Version 30

Added

Transceivers added on the Configuration section: JH693A; JH694A; JH695A; JL437A; JL438A; JL439A

19-Aug-2016

Version 29

Changed

Minor edits made on Configuration section

27-May-2016

Version 28

Changed

Document name changed to HPE FlexFabric 5820 Switch Series
Product description updated.

08-Jan-2016

Version 27

Changed

Warranty and support updated

12-Oct-2015

Version 26

Added

Added new DC power supply: JH336A

Changed

Updated Overview and Configuration sections

29-May-2015

Version 25

Changed

Removed Rule 4 from Rack Level CTO Section Only on the Configuration Section

20-Mar-2015

Version 24

Changed

A to B Product Roll on the Switch Series, Features and benefits Technical Specifications and Configuration sections were updated.
Overview and Technical Specifications were updated
Accessories Section updated

03-Jul-2014

Version 23

Changed

Configuration menu updated.

10-Jun-2014

Version 22

Changed

Switch Options were revised in Configuration.

19-Mar-2014

Version 21

Changed

Fan Trays were revised in Configuration.

17-Fev-2014

Version 20

Changed

Transceivers were revised.

16-Jan-2014

Version 19

Changed

Notes were revised throughout Configuration and Configuration AF Model and External Redundant Power Supplies and Options for the HPE RPS1600 Redundant Power System were added to Configuration SF Model.

22-Nov-2013

Version 18

Changed

Configuration was completely revised.

31-Oct-2013

Version 17

Changed

Configuration AF Model was completely revised.

09-Oct-2013

Version 16

Removed

HPE X124 1G SFP LC SX and HPE X124 1G SFP LC LX Transceivers were removed.

11-Sep-2013

Version 15

Changed

Minor edit was made in Configuration

19-Aug-2013

Version 14

Changed

Notes sections were revised in Configuration

21-Jun-2013

Version 13

Changed

HPE 5820AF-24XG Switch was revised in Configuration

10-Jun-2013

Version 12

Removed

Accessory Product Details: Removed Hp 0.5 - 50 m PremierFlex 0M3+LC/LC Optical Cables.

Added

Added Configuration and Configurations AF Model sections.

Changed

Accessories: Updated HPE 5820 Switch Series accessories section.

24-Aug-2012

Version 11

Changed

Updated the Features and Benefits, Introduction and Accessories sections.

22-Mar-2012

Version 9

Changed

The formatting in one of the models in Specifications was updated.

16-Nov-2011

Version 8

Changed

Specifications were revised.

30-Sep-2011

Version 7

Added

Accessory Product Details was added.

26-Sep-2011

Version 6

Changed

Accessories was revised, a new model was added, and the verbiage in the other models, as well as the Features and Benefits section was updated.

20-Sep-2011

Version 5

Changed

Accessories was revised.

09-May-2011

Version 4

Changed

Accessories was revised.

19-Apr-2011

Version 3

Changed

Accessories was revised.

16-Mar-2011

Version 2

Changed

Monitor and Diagnostics was revised.

13-Sep-2010

Version 1

Created

Document creation