Главная Справочники HPE Managed Switches

HPE Altoline 6940 Switch Series: технические характеристики и документация

Нужна помощь с конфигурацией?

Пришлите SKU, спецификацию или список требований. Специалист Apltech проверит совместимость компонентов и найдёт актуальные артикулы

Получить консультацию →

HPE Altoline 6940 Switch Series: технические характеристики и документация

В архиве

HPE Altoline 6940 Switch Series

Overview

HPE Altoline 6940 Switch Series


Models
HPE Altoline 6940 32QSFP+ PPC ONIE AC Front-to-Back Switch	JL114A
HPE Altoline 6940 32QSFP+ PPC ONIE AC Back-to-Front Switch	JL115A
HPE Altoline 6940 32QSFP+ x86 ONIE AC Front-to-Back Switch	JL165A
HPE Altoline 6940 32QSFP+ x86 ONIE AC Back-to-Front Switch	JL166A

Key features
High 40GbE port density and low latency for demanding applications. ONIE boot loader for choice of network OS and easy installation. Open-networking and disaggregated solution for customer choice. VXLAN for efficient network virtualization overlay solutions. 40GbE and redundant fans and power supplies for data center deployments.

Product overview
The HPE Altoline 6940 Switch Series are top-of-rack (TOR) or spine switches for high-performance data centers. In a compact 1RU form factor, the switch provides line-rate L2 and L3 switching across up to 32 x QSFP ports, supporting 10GbE or 40GbE server connections as a ToR switch, or 10GbE or 40GbE spine interconnects as a spine switch. The 32 fixed QSFP ports support up to 32 x 40GbE connections or 96 x 10GbE with 8 x 40GbE uplink connections. The HPE Altoline 6940 Switch Series are bare-metal switches loaded with the Open Network Install Environment (ONIE), which supports the installation of compatible independent switch OS offerings.

Features and benefits

Data center optimized

Flexible high port density
the HPE Altoline 6940 Switch Series enables scaling of the server edge with 40GbE spine and ToR deployments to new heights with high-density 32-port solutions delivered in a 1RU design. Up to 24 40GbE QSFP+ ports can also be configured as four 10GbE ports by using a 40GbE-to-10GbE splitter cable providing up to 96 10GbE ports with eight 40GbE uplinks.
High-performance switching
cut-through and nonblocking architecture delivers low latency (600 - 720 nanosecond for 40GbE) for very demanding enterprise applications; the switch delivers high-performance switching capacity and wire-speed packet forwarding
Hot/cold aisle support
models available with front-to-back (port-to-power) or back-to-front (power-to-port) airflow
Redundant fans and power supplies
1+1 internal redundant and hot-pluggable power supplies and N+1 redundant fan trays enhance reliability and availability
VXLAN hardware support
supports VXLAN VTEP overlay technologies

Manageability

Out-of-band interface
isolates management traffic from user data plane traffic for complete isolation and total reachability, no matter what happens in the data plane
ONIE bootloader
switch is loaded with Open Network Install Environment (ONIE) software installer

Layer 2 switching

VLAN support
provides support for 4,096 VLAN IDs

Additional information

Low power consumption
typical operation uses just 267W of AC power

Warranty and support

1-year Warranty
See http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
Software releases
to find software for your product, refer to http://www.hpe.com/networking/support ; for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary

Configuration

Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

HPE Altoline 6940 32QSFP+ x86 ONIE AC Front-to-Back Switch		JL165A
32 QSFP+ 40GbE ports (min=0 \ max=32 QSFP+ Transceivers) Each Switch: 2 Power Supplies Standard (min=2 \ max=2) 5 Front to Back Fan Trays Standard (min=5 \ max=5) 1U - Height		See Configuration NOTE: 1, 2, 5

PDU Cable NA/MEX/TW/JP		JL165A#B2B
C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW		JL165A#B2C
C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord		JL165A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)

No Power Cord		JL165A#AC3
No Localized Power Cord Selected

HPE Altoline 6940 32QSFP+ x86 ONIE AC Back-to-Front Switch		JL166A
32 QSFP+ 40GbE ports (min=0 \ max=32 QSFP+ Transceivers) Each Switch: 2 Power Supplies Standard (min=2 \ max=2) 5 Back to Front Fan Trays Standard (min=5 \ max=5) 1U - Height		See Configuration NOTE: 1, 2, 5

PDU Cable NA/MEX/TW/JP		JL166A#B2B
C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable NA/MEX/TW/JP		JL166A#B2C
C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord		JL166A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)

No Power Cord		JL166A#AC3
No Localized Power Cord Selected

Configuration Rules:

Note 1	Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) or #B2E. (See Localization Menu)

Note 2	The following QSFP+ Transceivers install into this Switch:
	HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver	JG661A
	HPE X140 40G QSFP+ MPO SR4 Transceiver	JG325B
	HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver	JG709A
	HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver	JL251A
	HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable	JG326A
	HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable	JG327A
	HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable	JG328A
	HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable	JG329A
	HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable	JG330A
	HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable	JG331A

Note 5	The following DAC Splitter Cables install into this Switch:
	HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable	JG329A
	HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable	JG330A
	HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable	JG331A

Rack Level Integration CTO Models

CTO Switch Chassis

HPE Altoline 6940 32QSFP+ x86 ONIE AC Front-to-Back Switch		JL165A
32 QSFP+ 40GbE ports (min=0 \ max=32 QSFP+ Transceivers) Each Switch: 2 Power Supplies Standard (min=2 \ max=2) 5 Front to Back Fan Trays Standard (min=5 \ max=5) 1U - Height		See Configuration NOTE: 1, 2, 5

PDU Cable NA/MEX/TW/JP		JL165A#B2B
C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW		JL165A#B2C
C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord		JL165A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)

HPE Altoline 6940 32QSFP+ x86 ONIE AC Back-to-Front Switch		JL166A
32 QSFP+ 40GbE ports (min=0 \ max=32 QSFP+ Transceivers) Each Switch: 2 Power Supplies Standard (min=2 \ max=2) 5 Back to Front Fan Trays Standard (min=5 \ max=5) 1U - Height		See Configuration NOTE: 1, 2, 5

PDU Cable NA/MEX/TW/JP		JL166A#B2B
C13 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable NA/MEX/TW/JP		JL166A#B2C
C13 PDU Jumper Cord (ROW)

High Volt Switch/Router to Wall Power Cord		JL166A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)

Configuration Rules:

Note 1	Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) or #B2E. (See Localization Menu)

Note 2	The following QSFP+ Transceivers install into this Switch:
	HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver	JG661A
	HPE X140 40G QSFP+ MPO SR4 Transceiver	JG325B
	HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver	JG709A
	HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver	JL251A
	HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable	JG326A
	HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable	JG327A
	HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable	JG328A
	HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable	JG329A
	HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable	JG330A
	HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable	JG331A

Note 5	The following DAC Splitter Cables install into this Switch:
	HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable	JG329A
	HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable	JG330A
	HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable	JG331A

Transceivers

SFP Transceivers

HPE X120 1G SFP RJ45 T Transceiver		JD089B
HPE X120 1G SFP LC SX Transceiver		JD118B
HPE X120 1G SFP LC LX Transceiver		JD119B
HPE X120 1G SFP LC LH40 1550nm Transceiver		JD062A

SFP+ Transceivers

HPE X130 10G SFP+ LC SR Transceiver		JD092B
HPE X130 10G SFP+ LC LR Transceiver		JD094B
HPE X130 10G SFP+ LC SR Data Center Transceiver		JL437A
HPE X130 10G SFP+ LC LR Data Center Transceiver		JL439A
HPE X130 10G SFP+ LC LH 80km Transceiver		JG915A
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable		JD095C
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable		JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable		JD097C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable		JG081C
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable		JC784C

QSFP+ Transceivers

HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver		JL251A
HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver		JG661A
HPE X140 40G QSFP+ MPO SR4 Transceiver		JG325B
HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver		JG709A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable		JG326A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable		JG327A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable		JG328A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable		JG329A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable		JG330A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable		JG331A

Switch Enclosure Options

Rack Mount Kit
System (std 0 // max 1) User Selection (min 0 // max 1)

HPE Altoline Gen2 Rackmount Kit		JL198A
		See Configuration NOTE: 1, 3

Configuration Rules:

Note 1	This rack mount kit is only supported on the following switches:
	HPE Altoline 6940 32QSFP+ x86 ONIE AC Front-to-Back Switch	JL165A
	HPE Altoline 6940 32QSFP+ x86 ONIE AC Back-to-Front Switch	JL166A
	HPE Altoline 6920 48XG 6QSFP+ x86 ONIE AC Front-to-Back Switch	JL167A
	HPE Altoline 6920 48XG 6QSFP+ x86 ONIE AC Back-to-Front Switch	JL168A
	HPE Altoline 6960 32QSFP28 x86 ONIE AC Front-to-Back Switch	JL279A
	HPE Altoline 6960 32QSFP28 x86 ONIE AC Back-to-Front Switch	JL280A

Note 3	If a switch is ordered and factory racked, then this rackmount must be #0D1

Technical Specifications

HPE Altoline 6940 32QSFP+ PPC ONIE AC Front-to-Back Switch (JL114A)
I/O ports and slots	32 QSFP+ 40GbE ports
Additional ports and slots	1 RJ-45 serial console port 1 RJ-45 out-of-band management port 1 USB 2.0
Power supplies	2 power supply slots 1 minimum power supply required includes: 2 x PSUs
Fan tray	5 fan tray slots Switch comes with five (5) fan trays (port to power airflow)
Physical characteristics	Dimensions	17.32(w) x 18.5(d) x 1.72(h) in (44.00 x 47.0 x 4.4 cm)
Physical characteristics	Weight	18.52 lb (8.4 kg)
Memory and processor	Freescale PPC @ 1.2 GHz, 2 GB DDR3 SDRAM; Packet buffer size: 12 MB, 8 GB SD Card
Performance	40 Gbps Latency	> .6 µs
	Throughput	up to 1440 Mpps
	Routing/Switching capacity	2560 Gbps
	Routing table size	64000 entries (IPv4), 20000 entries (IPv6)
	MAC address table size	320000 entries
Environment	Operating temperature	32°F to 104°F (0°C to 40°C)
	Operating relative humidity	5% to 95%, noncondensing
	Nonoperating/Storage temperature	-40°F to 158°F (-40°C to 70°C)
Electrical characteristics	Frequency	50/60 Hz
	Voltage	90 - 264 VAC, rated (depending on power supply chosen)
	Maximum power rating	315 W
	Idle power	267 W
	Notes	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PSU Efficiency: Up to 93% for AC PSUs
Safety	cUL Certified; EN 60950; EN 55022 Class A; VCCI Class A; ROHS Compliance; FCC Class A: Regulations for Radio Frequency Devices for Electromagnetic Compliance; UL
Emissions	FCC part 15 Class A; EN 55022 Class A; VCCI
Immunity	ESD	EN 60950
Immunity	EFT/Burst	IEC 68-2-14
Management	Command-line interface; Out-of-band management; SNMP manager; Telnet; FTP
Services	Refer to the Hewlett Packard Enterprise website at: http://www.hp.com/networking/services or details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE Altoline 6940 32QSFP+ PPC ONIE AC Back-to-Front Switch (JL115A)
I/O ports and slots	32 QSFP+ 40GbE ports
Additional ports and slots	1 RJ-45 serial console port 1 RJ-45 out-of-band management port 1 USB 2.0
Power supplies	2 power supply slots 1 minimum power supply required includes: 2 x PSUs
Fan tray	5 fan tray slots Switch comes with five (5) fan trays (power to port airflow)
Physical characteristics	Dimensions	17.32(w) x 18.5(d) x 1.72(h) in (44.00 x 47.0 x 4.4 cm)
Physical characteristics	Weight	18.52 lb (8.4 kg)
Memory and processor	Freescale PPC @ 1.2 GHz, 2 GB DDR3 SDRAM; Packet buffer size: 12 MB, 8 GB SD Card
Performance	40 Gbps Latency	> .6 µs
	Throughput	up to 1440 Mpps
	Routing/Switching capacity	2560 Gbps
	Routing table size	64000 entries (IPv4), 20000 entries (IPv6)
	MAC address table size	320000 entries
Environment	Operating temperature	32°F to 104°F (0°C to 40°C)
	Operating relative humidity	5% to 95%, noncondensing
	Nonoperating/Storage temperature	-40°F to 158°F (-40°C to 70°C)
Electrical characteristics	Frequency	50/60 Hz
	Voltage	90 - 264 VAC, rated (depending on power supply chosen)
	Maximum power rating	315 W
	Idle power	267 W
	Notes	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PSU Efficiency: Up to 93% for AC PSUs
Safety	cUL Certified; EN 60950; EN 55022 Class A; VCCI Class A; ROHS Compliance; FCC Class A: Regulations for Radio Frequency Devices for Electromagnetic Compliance; UL
Emissions	FCC part 15 Class A; EN 55022 Class A; VCCI
Immunity	ESD	EN 60950
Immunity	EFT/Burst	IEC 68-2-14
Management	Command-line interface; Out-of-band management; SNMP manager; Telnet; FTP
Services	Refer to the Hewlett Packard Enterprise website at: http://www.hp.com/networking/services or details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE Altoline 6940 32QSFP+ x86 ONIE AC Front-to-Back Switch (JL165A)
I/O ports and slots	32 QSFP+ 40GbE ports
Additional ports and slots	1 RJ-45 serial console port 1 RJ-45 out-of-band management port 1 USB 2.0
Power supplies	2 power supply slots 1 minimum power supply required includes: 2 x PSUs
Fan tray	5 fan tray slots Switch comes with five (5) fan trays (port to power airflow)
Physical characteristics	Dimensions	17.32(w) x 18.5(d) x 1.72(h) in (44.00 x 47.0 x 4.4 cm)
Physical characteristics	Weight	18.52 lb (8.4 kg)
Memory and processor	Intel Atom C2538 quad-core x86 processor @ 2.4 GHz, 8 GB DDR3 SDRAM; Packet buffer size: 12 MB, 16 GB SD Card
Performance	40 Gbps Latency	> .6 µs
	Throughput	up to 1440 Mpps
	Routing/Switching capacity	2560 Gbps
	Routing table size	64000 entries (IPv4), 20000 entries (IPv6)
	MAC address table size	320000 entries
Environment	Operating temperature	32°F to 104°F (0°C to 40°C)
	Operating relative humidity	5% to 95%, noncondensing
	Nonoperating/Storage temperature	-40°F to 158°F (-40°C to 70°C)
Electrical characteristics	Frequency	50/60 Hz
	Voltage	90 - 264 VAC, rated
	Maximum power rating	315 W
	Idle power	267 W
	Notes	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PSU Efficiency: Up to 93% for AC PSUs
Safety	cUL Certified; EN 60950; EN 55022 Class A; VCCI Class A; ROHS Compliance; FCC Class A: Regulations for Radio Frequency Devices for Electromagnetic Compliance; UL
Emissions	FCC part 15 Class A; EN 55022 Class A; VCCI
Immunity	ESD	EN 60950
Immunity	EFT/Burst	IEC 68-2-14
Management	Command-line interface; Out-of-band management; SNMP manager; Telnet; FTP
Services	Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services or details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE Altoline 6940 32QSFP+ x86 ONIE AC Back-to-Front Switch (JL166A)
I/O ports and slots	32 QSFP+ 40GbE ports
Additional ports and slots	1 RJ-45 serial console port 1 RJ-45 out-of-band management port 1 USB 2.0
Power supplies	2 power supply slots 1 minimum power supply required includes: 2 x PSUs
Fan tray	5 fan tray slots Switch comes with five (5) fan trays (power to port airflow)
Physical characteristics	Dimensions	17.32(w) x 18.5(d) x 1.72(h) in (44.00 x 47.0 x 4.4 cm)
Physical characteristics	Weight	18.52 lb (8.4 kg)
Memory and processor	Intel Atom C2538 quad-core x86 processor @ 2.4 GHz, 8 GB DDR3 SDRAM; Packet buffer size: 12 MB, 16 GB SD Card
Performance	40 Gbps Latency	> .6 µs
	Throughput	up to 1440 Mpps
	Routing/Switching capacity	2560 Gbps
	Routing table size	64000 entries (IPv4), 20000 entries (IPv6)
	MAC address table size	320000 entries
Environment	Operating temperature	32°F to 104°F (0°C to 40°C)
	Operating relative humidity	5% to 95%, noncondensing
	Nonoperating/Storage temperature	-40°F to 158°F (-40°C to 70°C)
Electrical characteristics	Frequency	50/60 Hz
	Voltage	90 - 264 VAC, rated
	Maximum power rating	315 W
	Idle power	267 W
	Notes	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PSU Efficiency: Up to 93% for AC PSUs
Safety	cUL Certified; EN 60950; EN 55022 Class A; VCCI Class A; ROHS Compliance; FCC Class A: Regulations for Radio Frequency Devices for Electromagnetic Compliance; UL
Emissions	FCC part 15 Class A; EN 55022 Class A; VCCI
Immunity	ESD	EN 60950
Immunity	EFT/Burst	IEC 68-2-14
Management	Command-line interface; Out-of-band management; SNMP manager; Telnet; FTP
Services	Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services or details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

Accessories

HPE Altoline 6940 Switch Series accesories

Transceivers
HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable	JG326A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable	JG327A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable	JG328A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable	JG329A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable	JG330A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable	JG331A
HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver	JG661A
HPE X140 40G QSFP+ MPO SR4 Transceiver	JG325B
HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver	JG709A

Summary of Changes

Date	Version History	Action	Description of Change:
05-Feb-2018	Version 9	Added	Missing SKUs were added for these series.
18-Apr-2017	Version 8	Added	Transceivers added on the Configuration section: JL437A, JL439A
23-Sep-2016	Version 7	Changed	Warranty and support updated.
01-Aug-2016	Version 6	Changed	Several updates on Configuration section including the addition of the #AC3 Option
15-Apr-2016	Version 5	Changed	SKU descriptions updated (Accessories), Configuration section updated.
01-Apr-2016	Version 4	Changed	Minor changes on Technical Specifications
18-Mar-2016	Version 3	Changed	Product Number Descriptions updated Configuration section added
16-Feb-2016	Version 2	Changed	QuickSpecs name changed from HP Altoline 6712 Switch Series to HPE Altoline 6940 Switch Series
29-Jun-2015	Version 1	Created	Document creation


Sign up for updates

© Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.

To learn more, visit: http://www.hpe.com/networking

c04680995 - 15279 - Worldwide - V9 - 05-February-2018