HPE Aruba 5400 zl Switch Series: технические характеристики и документация

Aruba 5400 zl Switch Series

HP 5406-48G zl Switch

1

Power and Fault LEDs

6

LED Mode Select button and indicator LEDs

2

Locator LED

7

Console Port

3

Reset and Clear buttons

8

Auxiliary Port

4

Self Test LED

9

Module Link and Mode LEDs

5

Status LEDs for the Fans, Power Supplies, and Switch Modules

10

Switch Modules and slots with Link and Mode LEDs for each port located on each module

HP 5406-48G zl Switch Rear View

1

Grounding lug mounting holes

3

AC power connector

2

Power and Fault LEDs

4

Slot for installing optional redundant power supply

5

External PoE power connectors

HP 5412-92G zl Switch

1

Power and Fault LEDs

6

LED Mode Select button and indicator LEDs

2

Locator LED

7

Console Port

3

Reset and Clear buttons

8

Auxiliary Port

4

Self Test LED

9

Module Link and Mode LEDs

5

Status LEDs for the Fans, Power Supplies, and Switch Modules

10

Switch Modules and slots with Link and Mode LEDs for each port located on each module

HP 5412-92G zl Switch Rear View

1

Grounding lug mounting holes

3

Slot for installing optional redundant power supply

2

Power and Fault LEDs

4

AC power connector

5

External PoE power connectors

Models

HP 5406 zl Switch with Premium Software

J9642A

HP 5412 zl Switch with Premium Software

J9643A

HP 5406-44G-PoE+-2XG v2 zl Switch with Premium Software

J9533A

HP 5412-92G-PoE+-2XG v2 zl Switch with Premium Software

J9532A

HP 5406-44G-PoE+-4G-SFP v2 zl Switch with Premium Software

J9539A

HP 5412-92G-PoE+-4G v2 zl Switch with Premium Software

J9540A

HP 5406 8p 10GBASE-T 8p 10GbE SFP+ v2 zl Switch with Premium Software

J9866A

Key Features

• Advanced access layer, distribution, and core
• Integrated L2-to-L4 intelligent edge feature set
• Enterprise-class performance and security
• AllianceOne integrated
• Scalable 10/100/1000 and 10GbE connectivity

Product overview

The Aruba 5400 zl Switch Series consists of advanced intelligent switches in the HPE modular chassis product line, which includes 6-slot and 12-slot chassis as well as associated zl modules and bundles. The foundation for the switch series is a purpose-built, programmable Hewlett Packard Enterprise ProVision ASIC that allows the most demanding networking features, such as quality of service (QoS) and security, to be implemented in a scalable, yet granular, fashion. With 10/100/1000 and 10GbE connectivity; PoE+ and non-PoE options; integrated L3 features; and Hewlett Packard Enterprise AllianceOne solutions, the 5400 zl Switch Series offers excellent investment protection, flexibility, and scalability as well as ease of deployment, operation, and maintenance.

Features and Benefits

Software-defined networking

• OpenFlow
  supports OpenFlow 1.0 and 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths

Unified Wired and Wireless

• HTTP redirect function
  supports HPE Intelligent Management Center (IMC) bring your own device (BYOD) solution

Quality of Service (QoS)

• Advanced classifier-based QoS
  classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis
• Layer 4 prioritization
  enables prioritization based on TCP/UDP port numbers
• Traffic prioritization
  allows real-time traffic classification into eight priority levels mapped to eight queues
• Bandwidth shaping

- Port-based rate limiting
provides per-port ingress-/egress-enforced increased bandwidth

- Classifier-based rate limiting
uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port

- Guaranteed minimum
provides per-port, per-queue egress-based reduced bandwidth

• Class of Service (CoS)
  sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ

Management

• Remote intelligent mirroring
  mirrors selected ingress/egress traffic based on an ACL, port, MAC address, or VLAN to a local or remote HPE 8200 zl, 6600, 6200 yl, 5400 zl, or 3500 switch anywhere on the network
• RMON, XRMON, and sFlow v5
  provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
  advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
• Uni-Directional Link Detection (UDLD)
  monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops
• Management simplicity
  provides common software features and CLI implementation across all HPE ProVision-based switches (including the zl and yl switches)
• Command authorization
  leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents activity
• Friendly port names
  allow assignment of descriptive names to ports
• Dual flash images
  provide independent primary and secondary operating system files for backup while upgrading
• Multiple configuration files
  can be stored to the flash image
• Comware CLI

- Comware-compatible CLI
bridges the experience of Hewlett Packard Enterprise Comware CLI users who are using the ProVision CLI

- Display and fundamental Comware CLI commands
are natively embedded in the switch CLI; display output is formatted as on Comware-based switches; fundamental commands provide Comware-familiar initial switch setup

- Configuration Comware CLI commands
when Comware commands are entered, CLI help is elicited to formulate the correct ProVision software CLI command

Connectivity

• IEEE 802.3az Energy Efficient Ethernet
  lowers power consumption in periods of low link usage (supported on v2 zl 10/100/1000 and 10/100 modules)
• IEEE 802.3af Power over Ethernet (PoE)
  provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
• IEEE 802.3at Power over Ethernet Plus
  provides up to 30 W per port to IEEE 802.3 for PoE- and PoE+-powered devices, such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras
• Prestandard PoE support
  detects and provides power to pre-standard PoE devices (refer to the list of supported devices in the product FAQs, which can be accessed at hpe.com/networking)
• High-density port connectivity
  provides up to 12 interface module slots and up to 288 wire-speed 10/100/1000 PoE-enabled ports or 96 10-GbE ports per system
• Jumbo frames
  on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster-recovery services
• Auto-MDIX
  automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
• IPv6

- IPv6 host
enables switches to be managed in an IPv6 network

- Dual stack (IPv4 and IPv6)
transitions from IPv4 to IPv6, supporting connectivity for both
protocols

- MLD snooping
forwards IPv6 multicast traffic to the appropriate interface

- IPv6 ACL/QoS
supports ACL and QoS for IPv6 network traffic

- IPv6 routing
supports static and OSPFv3 routing protocols

- 6in4 tunneling
supports encapsulation of IPv6 traffic in IPv4 packets

- Security
provides RA guard, DHCPv6 protection, dynamic IPv6 lockdown

Performance

• High-speed, high-capacity architecture
  1 Tbps crossbar switching fabric provides intra-module and inter-module switching with 585.6 million pps throughput on the purpose-built ProVision ASICs
• Selectable queue configurations
  allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications

Resiliency and high availability

• Virtual Router Redundancy Protocol (VRRP)
  allows groups of two routers to dynamically back each other up to create highly available routed environments for IPv4 and IPv6 networks
• IEEE 802.1s Multiple Spanning Tree Protocol
  provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE 802.1D Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol
• IEEE 802.3ad Link Aggregation Control Protocol (LACP) and Hewlett Packard Enterprise port trunking
  support up to 144 trunks, each with up to eight links (ports) per trunk
• Distributed trunking
  enables loop-free and redundant network topology without using Spanning Tree Protocol; allows a server or switch to connect to two switches using one logical trunk for redundancy and load sharing
• Optional redundant power supply (HPE 5400 series)
  provides uninterrupted power and allows hot-swapping of the redundant power supplies when installed
• Hot-swappable modules (5400 zl series)
  permits modules, mini-GBICs, and power supplies in a redundant power supply configuration to be added or swapped without interrupting the network
• Sparing simplicity
  includes HPE zl common accessories (interface modules and power supplies)
• Uplink Failure Detection
  provides active-standby network path redundancy for servers that are configured for active-standby NIC teaming
• SmartLink
  provides easy-to-configure link redundancy of active and standby links

Layer 2 switching

• VLAN support and tagging
  supports the IEEE 802.1Q standard and 2,048 VLANs simultaneously
• IEEE 802.1v protocol VLANs
  isolate select non-IPv4 protocols automatically into their own VLANs
• GARP VLAN Registration Protocol
  allows automatic learning and dynamic assignment of VLANs
• IEEE 802.1ad Q-in-Q
  increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high-speed campus or metro network
• MAC-based VLAN
  provides granular control and security; uses RADIUS to map a MAC
  address/user to specific VLANs (requires v2 modules)
• Rapid Per-VLAN Spanning Tree (RPVST+)
  allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+
• Hewlett Packard Enterprise switch meshing
  dynamically load balances across multiple active redundant links to increase available aggregate bandwidth; allows concurrent Layer 3 routing with v2 modules

Layer 3 services

• User Datagram Protocol (UDP) helper function
  allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
• Loopback interface address
  defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability
• Route maps
  provide more control during route redistribution; allow filtering and altering of route metrics
• DHCP server
  centralizes and reduces the cost of IPv4 address management

Layer 3 routing

• Static IP routing
  provides manually configured routing for both IPv4 and IPv6 networks
• Routing Information Protocol (RIP)
  provides RIPv1 and RIPv2 routing
• OSPF
  provides OSPFv2 for IPv4 routing and OSPFv3 for IPv6 routing
• Policy-based routing
  uses a classifier to select traffic that can be forwarded based on policy set by the network administrator (requires v2 or higher modules)
• Border Gateway Protocol (BGP)
  provides IPv4 Border Gateway Protocol routing, which is scalable, robust, and flexible

Security

• Access control lists (ACLs)
  provide filtering based on the IP field, source/destination IP address/subnet, and source/destination TCP/UDP port number on per-VLAN or per-port basis
• Multiple user authentication methods

- IEEE 802.1X users per port
provides authentication of multiple IEEE 802.1X users per port

- Web-based authentication
authenticates from a Web browser for clients that do not support IEEE 802.1X supplicant

- MAC-based authentication
client is authenticated with the RADIUS server based on the client's MAC address

- Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port
switch port accepts up to 32 sessions of IEEE 802.1X, Web, and MAC authentications

• Virus throttling
  detects traffic patterns typical of worm-type viruses and either throttles or entirely prevents the virus from spreading across the routed VLANs or bridged interfaces without requiring external appliances
• DHCP protection
  blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
• Secure management access
  securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
• Switch CPU protection
  provides automatic protection against malicious network traffic trying to shut down the switch
• ICMP throttling
  defeats ICMP denial-of-service attacks by enabling any switch port to automatically throttle ICMP traffic
• Identity-driven ACL
  enables implementation of a highly granular and flexible access security policy and VLAN assignment specific to each authenticated network user
• STP BPDU port protection
  blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
• Dynamic IP lockdown
  works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing
• Dynamic ARP protection
  blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
• STP Root Guard
  protects the root bridge from malicious attacks or configuration mistakes
• Detection of malicious attacks
  monitors 10 types of network traffic and sends a warning when an anomaly that potentially can be caused by malicious attacks is detected
• Port security
  allows access only to specified MAC addresses, which can be learned or specified by the administrator
• MAC address lockout
  prevents particular configured MAC addresses from connecting to the network
• Source-port filtering
  allows only specified ports to communicate with each other
• RADIUS/TACACS+
  eases switch management security administration by using a password authentication server
• Secure Shell
  encrypts all transmitted data for secure remote CLI access over IP networks
• Secure Sockets Layer (SSL)
  encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
• Secure FTP
  allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
• Management Interface Wizard
  helps secure management interfaces such as SNMP, telnet, SSH, SSL, Web, and USB at the desired level
• Switch management logon security
  can require either RADIUS or TACACS+ authentication for secure switch CLI logon
• Security banner
  displays a customized security policy when users log in to the switch

Convergence

• IP multicast routing
  includes PIM Sparse and Dense modes to route IP multicast traffic
• IP multicast snooping (data-driven IGMP)
  automatically prevents flooding of IP multicast traffic
• LLDP-MED (Media Endpoint Discovery)
  is a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
• PoE allocations
  support multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user specified) to allocate PoE power for more efficient energy savings
• Auto VLAN configuration for voice

- RADIUS VLAN: uses a standard RADIUS attribute and LLDP-MED to automatically configure a VLAN for IP phones

- CDPv2: uses CDPv2 to configure legacy IP phones

• Local MAC Authentication
  assigns attributes such as VLAN and QoS using locally configured profile that can be a list of MAC prefixes

Warranty and support

• Limited Lifetime Warranty v2.0
  see http://www.hpe.com/networking/warrantysummary for warranty and support information included with your product purchase.
• Software releases
  to find software for your product, refer to http://www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary

Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

HP 5406 zl Switch with Premium Software

J9642A

• 1 Power Supply required
• 4U - Height

HP 5406-44G-PoE+-2XG v2 zl Switch with Premium Software

J9533A

• 44 autosensing 10/100/1000 port
• 1 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module  included (min=0 \ max=2 SFP+  Transceivers)
• 1 - J9534A  HP 24-port Gig-T PoE+ v2 zl Module  included
• 4U - Height

See Configuration NOTE:1, 5, 9

PDU Cable NA/MEX/TW/JP

J9533A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9533A#B2C

• C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9533A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5406-44G-PoE+-4G-SFP v2 zl Switch with Premium Software

J9539A

• 44 autosensing 10/100/1000 port
• 1 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9535A HP 20-port GT PoE+/4-port SFP v2 zl Mod  included (min=0 \ max=4 SFP  Transceivers)
• 1 - J9534A  HP 24-port Gig-T PoE+ v2 zl Module  included
• 4U - Height

See Configuration NOTE:2, 5, 9

PDU Cable NA/MEX/TW/JP

J9539A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9539A#B2C

• C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9539A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5406 8p 10GBASE-T 8p 10GbE SFP+ v2 zl Switch with Premium Software

J9866A

• 8 RJ-45 10GbE ports
• 1 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9546A HP 8-port 10GBASE-T v2 zl Module included
• 1 - J9538A HP 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers)
• 4U - Height

See Configuration NOTE:1, 5, 9

PDU Cable NA/MEX/TW/JP

J9866A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9866A#B2C

• C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9866A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5412 zl Switch with Premium Software

J9643A

• 2 Power Supplies required
• 7U - Height

HP 5412-92G-PoE+-2XG v2 zl Switch with Premium Software

J9532A

• 92 autosensing 10/100/1000 port
• 2 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module  included(min=0 \ max=2 SFP+  Transceivers)
• 3 - J9534A  HP 24-port Gig-T PoE+ v2 zl Module  included
• 7U - Height

See Configuration NOTE:1, 5, 9

PDU Cable NA/MEX/TW/JP

J9532A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9532A#B2C

• C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9532A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5412-92G-PoE+-4G v2 zl Switch with Premium Software

J9540A

• 92 autosensing 10/100/1000 port
• 2 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9535A HP 20-port Gig-T PoE+ / 4-port SFP v2 zl Module  included  (min=0 \ max=4 SFP  Transceivers)
• 3 - J9534A  HP 24-port Gig-T PoE+ v2 zl Module  included
• 7U - Height

See Configuration NOTE:2, 5, 9

PDU Cable NA/MEX/TW/JP

J9540A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9540A#B2C

• C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9540A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

Configuration Rules:

Note 1

The following Transceivers install into this Chassis:

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE X121 1G SFP LC LX Transceiver

J4859C

HPE X121 1G SFP LC LH Transceiver

J4860C

HPE X121 1G SFP RJ45 T Transceiver

J8177C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HPE X132 10G SFP+ LC ER Transceiver

J9153A

HPE X132 10G SFP+ LC LR Transceiver

J9151A

HPE X132 10G SFP+ LC LRM Transceiver

J9152A

HPE X132 10G SFP+ LC SR Transceiver

J9150A

HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable

J9281B

HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

J9283B

HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable

J9285B

HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable

J9300A

HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable

J9301A

HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable

J9302A

Note 2

The following Transceivers install into this switch:

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE X121 1G SFP LC LX Transceiver

J4859C

HPE X121 1G SFP LC LH Transceiver

J4860C

HPE X121 1G SFP RJ45 T Transceiver

J8177C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HPE X111 100M SFP LC FX Transceiver

J9054C

Note 5

If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch .   (Offered only in North America, Mexico Taiwan, and  Japan)

Note 9

Localization required on orders without #B2B, #B2C or #B2E options.

 Box Level Integration CTO Models

CTO Solution Sku

HP 54xx Configure-to-order Switch

J9809A

• SSP trigger sku

CTO Switch Chassis

HP 5406 zl Switch with Premium Software

J9642A

• 1 Power Supply required
• 4U - Height

See Configuration NOTE:4, 10

HP 5406-44G-PoE+-2XG v2 zl Switch with Premium Software

J9533A

• 44 autosensing 10/100/1000 port
• 1 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module  included (min=0 \ max=2 SFP+  Transceivers)
• 1 - J9534A  HP 24-port Gig-T PoE+ v2 zl Module  included
• 4U - Height

See Configuration NOTE:1, 4, 8, 10, 12

PDU Cable NA/MEX/TW/JP

J9533A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9533A#B2C

• C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9533A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5406-44G-PoE+-4G-SFP v2 zl Switch with Premium Software

J9539A

• 44 autosensing 10/100/1000 port
• 1 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9535A HP 20-port GT PoE+/4-port SFP v2 zl Mod  included (min=0 \ max=4 SFP  Transceivers)
• 1 - J9534A  HP 24-port Gig-T PoE+ v2 zl Module  included
• 4U - Height

See Configuration NOTE: 2, 4, 8, 10, 12

PDU Cable NA/MEX/TW/JP

J9539A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9539A#B2C

• C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9539A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5406 8p 10GBASE-T 8p 10GbE SFP+ v2 zl Switch with Premium Software

J9866A

• 8 RJ-45 10GbE ports
• 1 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9546A HP 8-port 10GBASE-T v2 zl Module included
• 1 - J9538A HP 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers)
• 4U - Height

See Configuration NOTE:1, 4, 8, 10, 12

PDU Cable NA/MEX/TW/JP

J9866A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9866A#B2C

• C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9866A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5412 zl Switch with Premium Software

J9643A

• 2 Power Supplies required
• 7U - Height

See Configuration NOTE:4, 10

HP 5412-92G-PoE+-2XG v2 zl Switch with Premium Software

J9532A

• 92 autosensing 10/100/1000 port
• 2 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module  included(min=0 \ max=2 SFP+  Transceivers)
• 3 - J9534A  HP 24-port Gig-T PoE+ v2 zl Module  included
• 7U - Height

See Configuration NOTE:1, 4, 8, 10, 12

PDU Cable NA/MEX/TW/JP

J9532A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9532A#B2C

• C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9532A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5412-92G-PoE+-4G v2 zl Switch with Premium Software

J9540A

• 92 autosensing 10/100/1000 port
• 2 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9535A HP 20-port Gig-T PoE+ / 4-port SFP v2 zl Module  included  (min=0 \ max=4 SFP  Transceivers)
• 3 - J9534A  HP 24-port Gig-T PoE+ v2 zl Module  included
• 7U - Height

See Configuration NOTE:2, 4, 8, 10, 12

PDU Cable NA/MEX/TW/JP

J9540A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9540A#B2C

• C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9540A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

Configuration Rules:

Note 1

The following Transceivers install into this Chassis : (Use #0D1 or #B01 if switch is CTO) - if applicable

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE X121 1G SFP LC LX Transceiver

J4859C

HPE X121 1G SFP LC LH Transceiver

J4860C

HPE X121 1G SFP RJ45 T Transceiver

J8177C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HPE X132 10G SFP+ LC ER Transceiver

J9153A

HPE X132 10G SFP+ LC LR Transceiver

J9151A

HPE X132 10G SFP+ LC LRM Transceiver

J9152A

HPE X132 10G SFP+ LC SR Transceiver

J9150A

HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable

J9281B

HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

J9283B

HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable

J9285B

HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable

J9300A

HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable

J9301A

HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable

J9302A

Note 2

The following Transceivers install into this Chassis : (Use #0D1 if switch is CTO) - if applicable

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE X121 1G SFP LC LX Transceiver

J4859C

HPE X121 1G SFP LC LH Transceiver

J4860C

HPE X121 1G SFP RJ45 T Transceiver

J8177C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HPE X111 100M SFP LC FX Transceiver

J9054C

Note 4

Localization required on orders without #B2B, #B2C or #B2E options.

Note 8

If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch . (Offered only in North America, Mexico Taiwan, and  Japan)

Note 10

If the Switch Chassis is to be Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis and integrated to the J9809A - HPE 5400 CTO Enablement. (Min 1/Max 1 Switch per SSP)

Note 12

If this Switch is selected, Then a Minimum of 1 factory integrated accessory must be ordered and integrated to CTO chassis.  See Menu below, option must have a #0D1 to be integrated to the CTO Chassis. 

 Rack Level Integration CTO Models

CTO Switch Chassis

HP 5406 zl Switch with Premium Software

J9642A

• 1 Power Supply required
• 4U - Height

See Configuration NOTE:11

HP 5406-44G-PoE+-2XG v2 zl Switch with Premium Software

J9533A

• 44 autosensing 10/100/1000 port
• 1 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module  included (min=0 \ max=2 SFP+  Transceivers)
• 1 - J9534A  HP 24-port Gig-T PoE+ v2 zl Module  included
• 4U - Height

See Configuration NOTE:1, 4, 11

PDU Cable NA/MEX/TW/JP

J9533A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9533A#B2C

• C15 PDU Jumper Cord (ROW)

HP 5406-44G-PoE+-4G-SFP v2 zl Switch with Premium Software

J9539A

• 44 autosensing 10/100/1000 port
• 1 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9535A HP 20-port GT PoE+/4-port SFP v2 zl Mod  included (min=0 \ max=4 SFP  Transceivers)
• 1 - J9534A  HP 24-port Gig-T PoE+ v2 zl Module  included
• 4U - Height

See Configuration NOTE:2, 4, 11

PDU Cable NA/MEX/TW/JP

J9539A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9539A#B2C

• C15 PDU Jumper Cord (ROW)

HP 5406 8p 10GBASE-T 8p 10GbE SFP+ v2 zl Switch with Premium Software

J9866A

• 8 RJ-45 10GbE ports
• 1 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9546A HP 8-port 10GBASE-T v2 zl Module included
• 1 - J9538A HP 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers)
• 4U - Height

See Configuration NOTE:1, 4, 11

PDU Cable NA/MEX/TW/JP

J9866A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9866A#B2C

• C15 PDU Jumper Cord (ROW)

HP 5412 zl Switch with Premium Software

J9643A

• 2 Power Supplies required
• 7U - Height

See Configuration NOTE:11

HP 5412-92G-PoE+-2XG v2 zl Switch with Premium Software

J9532A

• 92 autosensing 10/100/1000 port
• 2 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module  included(min=0 \ max=2 SFP+  Transceivers)
• 3 - J9534A  HP 24-port Gig-T PoE+ v2 zl Module  included
• 7U - Height

See Configuration NOTE:1, 4, 11

PDU Cable NA/MEX/TW/JP

J9532A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9532A#B2C

• C15 PDU Jumper Cord (ROW)

HP 5412-92G-PoE+-4G v2 zl Switch with Premium Software

J9540A

• 92 autosensing 10/100/1000 port
• 2 - J9306A  HP 1500 W PoE+ zl Power Supply included
• 1 - J9535A HP 20-port Gig-T PoE+ / 4-port SFP v2 zl Module  included  (min=0 \ max=4 SFP  Transceivers)
• 3 - J9534A  HP 24-port Gig-T PoE+ v2 zl Module  included
• 7U - Height

See Configuration NOTE:2, 4, 11

PDU Cable NA/MEX/TW/JP

J9540A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9540A#B2C

• C15 PDU Jumper Cord (ROW)

Configuration Rules:

Note 1

The following Transceivers install into this Chassis : (Use #0D1 or #B01 if switch is CTO) - if applicable

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE X121 1G SFP LC LX Transceiver

J4859C

HPE X121 1G SFP LC LH Transceiver

J4860C

HPE X121 1G SFP RJ45 T Transceiver

J8177C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HPE X132 10G SFP+ LC ER Transceiver

J9153A

HPE X132 10G SFP+ LC LR Transceiver

J9151A

HPE X132 10G SFP+ LC LRM Transceiver

J9152A

HPE X132 10G SFP+ LC SR Transceiver

J9150A

HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable

J9281B

HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

J9283B

HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable

J9285B

HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable

J9300A

HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable

J9301A

HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable

J9302A

Note 2

The following Transceivers install into this Chassis : (Use #0D1 if switch is CTO) - if applicable

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE X121 1G SFP LC LX Transceiver

J4859C

HPE X121 1G SFP LC LH Transceiver

J4860C

HPE X121 1G SFP RJ45 T Transceiver

J8177C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HPE X111 100M SFP LC FX Transceiver

J9054C

Note 4

Localization required on orders without #B2B, #B2C or #B2E options.

Note 11

If the CTO Switch Chassis needs to be racked, Then the CTO Base Model needs to integrate (with #0D1) to the HPE Rack. 

Modules

 J9642A only - System (std 0 // max=6) User Selection (min 0 / max=6) per Chassis

 J9643A  only - System (std 0 // max=12) User Selection (min 0 / max=12) per Chassis

 J9533A, J9539A, J9866A only - System (std 2 // max=6) User Selection (min 0 / max=4) per Chassis

J9532A, J9540A  only - System (std 4 // max=12) User Selection (min 0 / max=8) per Chassis

I/O Modules

HPE 20-port Gig-T PoE+/4-port SFP v2 zl Module

J9535A

• min=0 \ max=4 SFP  Transceivers

See Configuration NOTE:1

HPE 24-port SFP v2 zl Module

J9537A

• min=0 \ max=24 SFP  Transceivers

See Configuration NOTE:1

HPE 12-port Gig-T PoE+/12-port SFP v2 zl Module

J9637A

• min=0 \ max=12 SFP  Transceivers

See Configuration NOTE:1

HPE 20-port Gig-T/4-port SFP v2 zl Module

J9549A

• min=0 \ max=4 SFP  Transceivers

See Configuration NOTE:1

HPE 8-port 10GbE SFP+ v2 zl Module

J9538A

• min=0 \ max=8 SFP+  Transceivers

See Configuration NOTE:5

HPE 20-port Gig-T PoE+/2-port 10GbE SFP+ v2 zl Module

J9536A

• min=0 \ max=2 SFP+  Transceivers

See Configuration NOTE:5

HPE 20-port Gig-T/2-port 10GbE SFP+ v2 zl Module

J9548A

• min=0 \ max=2 SFP+  Transceivers

See Configuration NOTE:5

HPE 8-port 10GbE SFP+ v2 zl Module

J9546A

• No Transceivers

HP 20-port Gig-T / 4-port Mini-GBIC zl Module

J8705A

• min=0 \ max=4 SFP  Transceivers

See Configuration NOTE:12

HPE 24-port Gig-T PoE+ v2 zl Module

J9534A

• No Transceivers

HP 24-port 10/100 PoE+ zl Module

J9478A

• No Transceivers

HPE 24-port 10/100 PoE+ v2 zl Module

J9547A

• No Transceivers

HPE 24-port Gig-T v2 zl Module

J9550A

• No Transceivers

HP MSM775 zl Premium Controller Module

J9840A

• No Transceivers

See Configuration NOTE:10

HP Survivable Branch Communication zl Module powered by Microsoft Lync

J9485A

• No Transceivers. Double Height Module, takes up 2 Vertical slots*

See Configuration NOTE:4, 6, 7, 8, 9

HPE Advanced Services v2 zl Module with HDD

J9857A

• No Transceivers

See Configuration NOTE:11

HPE Advanced Services v2 zl Module with SSD

J9858A

• No Transceivers

See Configuration NOTE:11

Configuration Rules:

Note 1

The following Transceivers install into this Module:  (Use #0D1 if switch is CTO) - if applicable

HPE X111 100M SFP LC FX Transceiver

J9054C

HPE X121 1G SFP LC LH Transceiver

J4860C

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE X121 1G SFP LC LX Transceiver

J4859C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HPE X121 1G SFP RJ45 T Transceiver

J8177C

Note 2

The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO) - if applicable

HPE X132 10G SFP+ LC ER Transceiver

J9153A

HPE X132 10G SFP+ LC LR Transceiver

J9151A

HPE X132 10G SFP+ LC LRM Transceiver

J9152A

HPE X132 10G SFP+ LC SR Transceiver

J9150A

HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable

J9281B

HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

J9283B

HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable

J9285B

HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable

J9300A

HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable

J9301A

HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable

J9302A

Note 3

The following Transceivers install into this Module: (Use #0D1 if switch is CTO) - if applicable

HP X131 10G X2 SC LR Transceiver

J8437A

Note 4

The following Upgrades install into this Module:

Sangoma 2-port T1/E1/J1 Telephony Card

J9488A

 Sangoma 4-port T1/E1/J1 Telephony Card

J9489A

Sangoma 4-port FXO Telephony Card

J9516A

Sangoma 4-port FXS Telephony Card

J9482A

Sangoma 2-p FXO / 2-p FXS Telephony Card

J9518A

Sangoma 1-port T1/E1/J1 Telephony Card

J9487A

Note 5

The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO) - if applicable

HPE X121 1G SFP LC LH Transceiver

J4860C

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE X121 1G SFP LC LX Transceiver

J4859C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HPE X121 1G SFP RJ45 T Transceiver

J8177C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HPE X132 10G SFP+ LC ER Transceiver

J9153A

HPE X132 10G SFP+ LC LR Transceiver

J9151A

HPE X132 10G SFP+ LC LRM Transceiver

J9152A

HPE X132 10G SFP+ LC SR Transceiver

J9150A

HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable

J9281B

HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

J9283B

HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable

J9285B

HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable

J9300A

HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable

J9301A

HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable

J9302A

Note 6

For Switches: J9643A, J9532A, J9540A; If this module is selected, Then Max = 4 Modules of any combination or pairing of the following modules: J9485A.  Double Height Modules occupy 2 vertical slots.

Note 7

If this module is selected, Then show following message:
For better airflow, This module must be located on left side only in the following Switches: J9642A, J9533A, J9539A, J9866A
For better airflow, It is preferred, but not required, that This module be located on left side only in the following Switches: J9643A, J9532A, J9540A.

Note 8

For Switches J9642A, J9533A, J9539A, J9866A; If this module is selected, Then Max = 3 SLOTS on left side of chassis only, of any combination or pairing of the following modules: J9485A. Double Height Modules occupy 2 vertical slots.

Note 9

This module occupies 2 Vertical Slots.

Note 10

Maximum of this Module per Chassis:
J9642A min=0\max=5 per Chassis
J9533A,  J9539A, J9866A,  min=0\max=4 per Chassis
J9643A,  J9532A, J9540A,   min=0\max=6 per Chassis
There are no restrictions on which slots these modules may go in.

Note 11

Maximum of this Module per Chassis:
J9642A, J9533A, J9539A, J9866A,  min=0\max=4 per Chassis
J9643A,  J9532A, J9540A,  min=0\max=6 per Chassis
There are no restrictions on which slots these modules may go in.

Note 12

The following Transceivers install into this Module:  (Use #0D1 if switch is CTO) - if applicable

HPE X111 100M SFP LC FX Transceiver

J9054C

HPE X121 1G SFP LC LH Transceiver

J4860C

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE X121 1G SFP LC LX Transceiver

J4859C

HPE X121 1G SFP RJ45 T Transceiver

J8177C

Transceivers

SFP Transceivers

HPE X111 100M SFP LC FX Transceiver

J9054C

HPE X121 1G SFP LC LH Transceiver

J4860C

HPE X121 1G SFP LC LX Transceiver

J4859C

HPE X121 1G SFP LC SX Transceiver

J4858C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HPE X121 1G SFP RJ45 T Transceiver

J8177C

SFP+ Transceivers

HPE X132 10G SFP+ LC ER Transceiver

J9153A

HPE X132 10G SFP+ LC LR Transceiver

J9151A

HPE X132 10G SFP+ LC LRM Transceiver

J9152A

HPE X132 10G SFP+ LC SR Transceiver

J9150A

HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable

J9281B

HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

J9283B

HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable

J9285B

HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable

J9300A

HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable

J9301A

HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable

J9302A

X2 Transceivers

HP X131 10G X2 SC LR Transceiver

J8437A

Internal Power Supplies

J9642ASystem (std 0 // max 2) User Selection (min 1 / max 2)

J9533A, J9866A and J9539A System (std 1 // max 2) User Selection (min 0 / max 1)

J9643A System (std 0 // max 4) User Selection (min 2 / max 4)

J9532A and J9540A System (std 2 // max 4) User Selection (min 0 / max 2)

HPE 1500W PoE+ zl Power Supply

J9306A

• includes 1 x c15, 1500w

See Configuration NOTE:1, 2, 6

PDU Cable NA/MEX/TW/JP

J9306A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J9306A#B2C

• C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9306A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

HPE 875W zl Power Supply

J8712A

• includes 1 x c15, 875w

See Configuration NOTE:1, 2, 5, 6

PDU Cable NA/MEX/TW/JP

J8712A#B2B

• C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

J8712A#B2C

• C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J8712A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

HPE 1500W zl Power Supply

J8713A

• includes 1 x c19

See Configuration NOTE:1, 2, 5, 6

PDU Cable NA/MX/TW/JP

J8713A#B2B

• C19 PDU Jumper Cord (NA/MX/TW/JP)

PDU Cable ROW

J8713A#B2C

• C19 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J8713A#B2E

• NEMA L6-20P Cord (NA/MEX/JP/TW)

Configuration Rules:

Note 1

Power Supplies cannot be mixed for a switch enclosure

Note 2

Localization required on orders without #B2B, #B2C or #B2E options.

Note 5

This power supply is not supported on the J9533A, J9539A, J9532A, J9866A and J9540A switches.  

Note 6

If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch .   (Offered only in NA, Mexico, Taiwan, and  Japan)

Remarks:

If Power Supply is added to switch with power supply, then Switch and Power Supply localization must match.

Drop down under power supply should offer the following options and results:

Switch/Router/Power Supply to PDU Power Cord -  #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)

Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)

High Volt Switch/Router/Power Supply to Wall Power Cord -  #B2E Option. (Offered only in North America, Mexico, Taiwan, and  Japan)

Cables

Multi-Mode Cables

HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable

AJ833A

HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable

AJ834A

HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable

AJ835A

HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable

AJ836A

HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable

AJ837A

HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable

AJ838A

HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable

AJ839A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable

QK732A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable

QK733A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable

QK734A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable

QK735A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable

QK736A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable

QK737A

Switch Enclosure Options

External Redundant Power Supplies

HP zl Power Supply Shelf

J8714A

• Height = 3U

See Configuration NOTE:1

Configuration Rules:

Note 1

This power supply is not supported on the J9821A, J9868A, J9823A, J9824A, J9822A, J9825A and J9826A switches.

Remarks:

This shelf allows the addition of 2 extra J9306A - HPE 1500 W PoE+ zl Power Supply in order to increase the number of POE+ ports. 

Cables included: includes two 2 m PoE (EPS) cables; cables can be used to carry PoE power to the connected switch; no extra cables are needed for a complete solution. Flexible mounting: the power shelf can be mounted forward or rear facing in a rack; in a four-post rack, two power shelves can be mounted front to front, requiring only 3U of rack space.

Survivable Branch Communication Upgrades

Sangoma 2-port T1/E1/J1 Telephony Card

J9488A

Sangoma 4-port T1/E1/J1 Telephony Card

J9489A

Sangoma 4-port FXO Telephony Card

J9516A

Sangoma 4-port FXS Telephony Card

J9482A

Sangoma 2-p FXO / 2-p FXS Telephony Card

J9518A

Sangoma 1-port T1/E1/J1 Telephony Card

J9487A

Remarks:

The Sangoma Telephony Cards are accessories to the J9485A.

US Federal Government certifications

HP zl Chassis FIPS 10K Rack Mounting Kit

J9708A

See Configuration NOTE:1

HP 16mm x 32mm Tmpr-Evidence (20) Labels

J9740A

See Configuration NOTE:1

HP 16mm x 32mm Tmpr-Evidence (120) Label

J9709A

See Configuration NOTE:1

HP 5406 zl FIPS Opacity Shield Kit     

J9710A

See Configuration NOTE:1

HP 5412 zl FIPS Opacity Shield Kit    

J9711A

See Configuration NOTE:1

HPE 5406 zl High Performance Fan Tray

J9721A

See Configuration NOTE:1

HPE 5412 zl High Performance Fan Tray

J9722A

See Configuration NOTE:1

Configuration Rules:

Note 1

Do not display in Watson. 

HP 5406 zl Switch with Premium Software
(J9642A)

I/O ports and slots

6 open module slots

Supports a maximum of 48 10-GbE ports or 144 autosensing 10/100/1000 ports or 144 mini-GBICs, or a combination

Power supplies

2 power supply slots
1 minimum power supply required (ordered separately)

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 6.9(h) in (44.45 x 45.09 x 17.53 cm) (4U height)

Weight

23.55 lb (10.68 kg)

Memory and processor

Gigabit Module

ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM

10G module

ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM

Management Module

Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); Horizontal surface mounting only

Performance

1000 Mb Latency

< 3.7 µs (FIFO 64-byte packets)

10 Gbps Latency

< 2.1 µs (FIFO 64-byte packets)

Throughput

up to 282.1 Mpps

Routing/Switching capacity

379.2 Gbps

Switch fabric speed

379.2 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 131°F (0°C to 55°C); 0°C to 40°C with J8706A or J8707A modules installed

Operating relative humidity

15% to 95% @ 131°F (55°C), noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 57 dB, Pressure: 40.2 dB ISO 7779, ISO
9296

Electrical characteristics

Frequency

50/60 Hz

Achieved Miercom Certified Green Award

Description

Chassis ships without power supplies. Two power supply slots are available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

2450 BTU/hr (2584 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr) (max. using PoE)

Voltage

100 - 127 / 200 - 240 VAC, rated

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity

EN

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC

Conducted

IEC 61000-4-6; 3 V

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

HPE PCM+; HPE PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C)

Notes

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; For example, J9142B, J8177C)

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP 5412 zl Switch with Premium Software
(J9643A)

I/O ports and slots

12 open module slots

Supports a maximum of 96 10-GbE ports or 288 autosensing 10/100/1000 ports or 288 mini-GBICs, or a combination

Power supplies

4 power supply slots
2 minimum power supplies required (ordered separately)

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 12.1(h) in (44.45 x 45.09 x 30.73 cm) (7U height)

Weight

34.94 lb (15.85 kg)

Memory and processor

Gigabit Module

ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM

10G module

ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM

Management Module

Freescale PowerPC 8540 @ 666 MHz, 4 MB flash Mb, 128 MB compact flash, 256 MB DDR SDRAM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); Horizontal surface mounting only

Performance

1000 Mb Latency

< 3.7 µs (FIFO 64-byte packets)

10 Gbps Latency

< 2.1 µs (FIFO 64-byte packets)

Throughput

up to 564.2 Mpps

Routing/Switching capacity

758.4 Gbps

Switch fabric speed

758.4 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 131°F (0°C to 55°C); 0°C to 40°C with J8706A or J8707A modules installed

Operating relative humidity

15% to 95% @ 131°F (55°C), noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 64 dB, Pressure: 57.5 dB ISO 7779, ISO 9296

Electrical characteristics

Frequency

50/60 Hz

Description

Chassis ships without power supplies. Four power supply slots are available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

4900 BTU/hr (5169 kJ/hr), (max. non-PoE); 7400 BTU/hr (7,807 kJ/hr) (max. using PoE)

Voltage

100 - 127 / 200 - 240 VAC, rated

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity

EN

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC

Conducted

IEC 61000-4-6; 3 V

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

HPE PCM+; HPE PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C)

Notes

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; For example, J9142B, J8177C).

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP 5406-44G-PoE+-2XG v2 zl Switch with Premium Software (J9533A)

Included accessories

1 HP 20-port Gig-T PoE+ / 2-port 10GbE SFP+ v2 zl Module (J9536A)
1 HP 1500W PoE+ zl Power Supply (J9306A)
1 HP 24-port Gig-T PoE+ v2 zl Module (J9534A)

Ports

44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

2 open 10-GbE SFP+ transceiver slots

4 open module slots

Supports a maximum of 16 10-GbE ports or 140 autosensing 10/100/1000 ports or 100 mini-GBICs, or a combination

Power supplies

2 power supply slots
1 minimum power supply required
includes: 1 x J9306A (HP 1500W PoE+ zl Power Supply)

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 6.9(h) in (44.45 x 45.09 x 17.53 cm) (4U height)

Weight

46.08 lb (20.9 kg)

Memory and processor

Gigabit Module

ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM

10G module

ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM

Management Module

Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); Horizontal surface mounting only

Performance

1000 Mb Latency

< 3.7 µs (FIFO 64-byte packets)

10 Gbps Latency

< 2.1 µs (FIFO 64-byte packets)

Throughput

up to 282.1 Mpps

Routing/Switching capacity

379.2 Gbps

Switch fabric speed

379.2 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 131°F (0°C to 55°C); 0°C to 40°C with J8706A or J8707A modules installed

Operating relative humidity

15% to 95% @ 131°F (55°C), noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 57 dB, Pressure: 40.2 dB ISO 7779, ISO 9296

Electrical characteristics

Frequency

50/60 Hz

Description

One J9306A installed. One open power supply slot is available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE);
3700 BTU/hr (3903 kJ/hr) (max. using PoE)

Voltage

110 - 127 / 200 - 240 VAC, rated

Idle power

215 W

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity

EN

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC

Conducted

IEC 61000-4-6; 3 V

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

HPE PCM+; HPE PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C)

Notes

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; For example, J9142B, J8177C

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP 5412-92G-PoE+-2XG v2 zl Switch with Premium Software (J9532A)

Included accessories

3 HP 24-port Gig-T PoE+ v2 zl Module (J9534A)
1 HP 20-port Gig-T PoE+ / 2-port 10GbE SFP+ v2 zl Module (J9536A)
2 HP 1500W PoE+ zl Power Supply (J9306A)

I/O ports and slots

92 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

2 open 10-GbE SFP+ transceiver slots

8 open module slots

Supports a maximum of 32 10-GbE ports or 284 autosensing 10/100/1000 ports or 196 mini-GBICs, or a combination

Power supplies

4 power supply slots
2 minimum power supplies required
includes: 2 x J9306A (HP 1500W PoE+ zl Power Supply)

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 12.1(h) in (44.45 x 45.09 x 30.73 cm) (7U height)

Weight

75.36 lb (34.18 kg)

Memory and processor

Gigabit Module

ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM

10G module

ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM

Management Module

Freescale PowerPC 8540 @ 666 MHz, 4 MB flash Mb, 128 MB compact flash, 256 MB DDR SDRAM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); Horizontal surface mounting only

Performance

1000 Mb Latency

< 3.7 µs (FIFO 64-byte packets)

10 Gbps Latency

< 2.1 µs (FIFO 64-byte packets)

Throughput

up to 564.2 Mpps

Routing/Switching capacity

758.4 Gbps

Switch fabric speed

758.4 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 131°F (0°C to 55°C); 0°C to 40°C with J8706A or J8707A modules installed

Operating relative humidity

15% to 95% @ 131°F (55°C), noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 64 dB, Pressure: 57.5 dB ISO 7779, ISO 9296

Electrical characteristics

Frequency

50/60 Hz

Description

Two J9306A installed. Two open power supply slots are available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

4900 BTU/hr (5169.5 kJ/hr), (max. non-PoE);
7400 BTU/hr (7807 kJ/hr) (max. using PoE)

Voltage

110 - 127 / 200 - 240 VAC, rated

Idle power

312 W

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity

EN

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC

Conducted

IEC 61000-4-6; 3 V

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

HPE PCM+; HPE PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C)

Notes

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; For example, J9142B, J8177C).

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP 5406-44G-PoE+-4G-SFP v2 zl Switch with Premium Software (J9539A)

Included accessories

1 HP 24-port Gig-T PoE+ v2 zl Module (J9534A)
1 HP 20-port Gig-T PoE+ / 4-port SFP v2 zl Module (J9535A)
1 HP 1500W PoE+ zl Power Supply (J9306A)

Ports

44 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 open mini-GBIC slots

4 open module slots

Supports a maximum of 16 10-GbE ports or 140 autosensing 10/100/1000 ports or 100 mini-GBICs, or a combination

Power supplies

2 power supply slots
1 minimum power supply required
includes: 1 x J9306A (HP 1500W PoE+ zl Power Supply)

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 6.9(h) in (44.45 x 45.09 x 17.53 cm) (4U height)

Weight

45.58 lb (20.68 kg)

Memory and processor

Gigabit Module

ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM

10G module

ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM

Management Module

Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); Horizontal surface mounting only

Performance

1000 Mb Latency

< 3.7 µs (FIFO 64-byte packets)

10 Gbps Latency

< 2.1 µs (FIFO 64-byte packets)

Throughput

up to 282.1 Mpps

Routing/Switching capacity

379.2 Gbps

Switch fabric speed

379.2 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 131°F (0°C to 55°C); 0°C to 40°C with J8706A or J8707A modules installed

Operating relative humidity

15% to 95% @ 131°F (55°C), noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 57 dB, Pressure: 40.2 dB ISO 7779, ISO 9296

Electrical characteristics

Frequency

50/60 Hz

Description

One J9306A installed. One open power supply slot is available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE);
3700 BTU/hr (3903 kJ/hr) (max. using PoE)

Voltage

110 - 127 / 200 - 240 VAC, rated

Idle power

215 W

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity

EN

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC

Conducted

IEC 61000-4-6; 3 V

Power frequency magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

HPE PCM+; HPE PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C)

Notes

Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; For example, J9142B, J8177C).

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

HP 5412-92G-PoE+-4G v2 zl Switch with Premium Software (J9540A)

Included accessories

HP 24-port Gig-T PoE+ v2 zl Module (J9534A)
1 HP 20-port Gig-T PoE+ / 4-port SFP v2 zl Module (J9535A)
2 HP 1500W PoE+ zl Power Supply (J9306A)

Ports

92 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 open mini-GBIC slots

8 open module slots

Supports a maximum of 32 10-GbE ports or 284 autosensing 10/100/1000 ports or 196 mini-GBICs, or a combination

Power supplies

4 power supply slots
2 minimum power supplies required
includes: 2 x J9306A (HP 1500W PoE+ zl Power Supply)

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 12.1(h) in (44.45 x 45.09 x 30.73 cm) (7U height)

Weight

74.86 lb (33.96 kg)

Memory and processor

Gigabit Module

ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM

10G module

ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM

Management Module

Freescale PowerPC 8540 @ 666 MHz, 4 MB flash Mb, 128 MB compact flash, 256 MB DDR SDRAM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); Horizontal surface mounting only

Performance

1000 Mb Latency

< 3.7 µs (FIFO 64-byte packets)

10 Gbps Latency

< 2.1 µs (FIFO 64-byte packets)

Throughput

up to 564.2 Mpps

Routing/Switching capacity

758.4 Gbps

Switch fabric speed

758.4 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 131°F (0°C to 55°C); 0°C to 40°C with J8706A or J8707A modules installed

Operating relative humidity

15% to 95% @ 131°F (55°C), noncondensing

Nonoperating/Storage temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 64 dB, Pressure: 57.5 dB ISO 7779, ISO 9296

Electrical characteristics

Frequency

50/60 Hz

Description

Two J9306A installed. Two open power supply slots are available; three different power supplies are available. See power supply products for additional specifications.

Maximum heat dissipation

4900 BTU/hr (5169.5 kJ/hr), (max. non-PoE);
7400 BTU/hr (7807 kJ/hr) (max. using PoE)

Voltage

110 - 127 / 200 - 240 VAC, rated

Idle power

312 W

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity

EN

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC

Conducted

IEC 61000-4-6; 3 V