HPE ProLiant m400 Server Cartridge: технические характеристики и документация

HPE ProLiant m400 Server Cartridge

HPE Moonshot System with the HPE ProLiant m400 server cartridge is designed to enhance the performance of Dynamic Web Content Delivery by lowering the load on databases via in-memory key-value caching.  The ProLiant m400 server cartridge has one AppliedMicro X-Gene 64-bit ARM System on a Chip (SoC) server having eight cores, 64GB of memory, and 10Gb Ethernet along with one M.2 flash storage module for local OS booting. 

The HPE Moonshot System uses an innovative new architecture that results from one simple design tenet: to align purpose-built modules with the right workload to provide optimal results for your environment. Traditional servers rely on dedicated components, including management, networking, storage, power cords and cooling fans in a single chassis. In contrast, the Moonshot system shares these chassis components and is capable of supporting 45 servers cartridge per 4.3U chassis.
This gives you the ability to generate greater revenue from a smaller footprint while driving down your operational costs.

Front View:

Rear View:

1.

QR Code label

9.

Optional - one (1)  M.2 solid state device 

2.

Cartridge Link LED/button

10.

Four (4) DDR3 SODIMM memory slots

3.

Cartridge UID LED/button

4.

Drive LED

5.

Cartridge health LED

6.

Cartridge power LED/button

7.

Four (4) DDR3 SODIMM memory slots

8.

One (1) AppliedMicro® X-Gene^TM Processor

What's New

• BIOS with support for both UBoot and UEFI (switchable)  

Models

HPE ProLiant m400 1P 64GB Configure-to-order Server Cartridge

771717-B21

NOTE: For ordering the HPE ProLiant m400 Server Cartridge, please see Step 1 of the Configuration to Order section of this QuickSpecs.

NOTE: For information on Hewlett Packard Enterprise Moonshot Chassis, Switch and Uplink Modules, please see the following:
Chassis:

HPE Moonshot 1500 Chassis Opt OS

http://www8.hp.com/us/en/products/servers/moonshot/index.html

Switch:

FastPATH

HPE Moonshot-45G Switch Module

https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111070

HPE Moonshot-180G Switch Module

https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111290

Comware

HPE Moonshot-45Gc Switch Module

http://www8.hp.com/us/en/products/servers/moonshot/index.html

HPE Moonshot-45XGc Switch Module

https://www.hpe.com/h20195/v2/GetHtml.aspx?docname=c04384058

Uplink:

HPE Moonshot-6SFP+ Uplink Module
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111292  

HPE Moonshot-16SFP+ Uplink Module

https://www.hpe.com/h20195/v2/gethtml.aspx?docname=c04499458

HPE Moonshot-4QSFP+ Uplink Module

https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111291

Processor

AppliedMicro® X-Gene^TM 1 Processor, Eight ARM64-bit 2.4 GHz cores

Cache Memory

Each core has a 32KB L1 Instruction and a 32KB L1 data cache.  Also, each core pair has a 256KB L2 cache and all 8 cores share an 8MB L3 cache  

Memory Protection

ECC

Memory

Type

HPE 8GB (1x8GB) PC3L-12800 (DDR3-1600) SODIMM Low Voltage Memory

DIMM Slots Available

Eight (8) SODIMM Slots

Standard Configuration

64GB (8x8GB)

Network Controller

Mellanox Connect-X3 Pro
Dual 10Gbe NIC

Storage Controller

Integrated into the System on a Chip (SoC)

Maximum Internal Storage (per Moonshot Server)

M.2 2280 solid state SATA boot device

765479-B21

120GB

765481-B21

240GB

765483-B21

480GB

m400 may be purchased with zero M.2 storage.

Interfaces

Cartridge Link LED/button

Cartridge UID LED/button

Drive LED

Cartridge health LED

Industry Standard Compliance

PXE Support

PCIe 3.0

System BIOS

Supports user switching between U-Boot and UEFI boot modes

Operating Systems and Virtualization Software Support for ProLiant Servers

Canonical Ubuntu for 64-bit ARM 14.04 (requires U-Boot environmen

NOTE: Only 64-bit versions of these operating systems are supported.
NOTE: For more information on Hewlett Packard Enterprise's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server including how to purchase from Hewlett Packard Enterprise, please visit our OS Support Site at: http://www.hp.com/go/ossupport and our driver download page: http://www.hp.com/go/servers/Moonshot/download

Form Factor

HPE ProLiant m400 Server Cartridge is a server cartridge that plugs into the HPE Moonshot 1500 Chassis.

Security

Power-on password

Setup password

Serial interface control

Power switch security

Administrator's password

Warranty

This product is covered by a global limited warranty and supported by Hewlett Packard Enterprise Services and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Pointnext operational services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE
Server Cartridge Warranty includes 3-Year Parts, 0-Year Labor, 0-Year Onsite support. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Factory Express Portfolio for Servers and Storage

HPE Factory Express offers configuration, customization, integration and deployment services for Hewlett Packard Enterprise servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as asset tagging, and custom packaging. Hewlett Packard Enterprise products supported through Factory Express include a wide array of servers and storage: HPE Moonshot, HPE Integrity, HPE ProLiant, HPE ProLiant Server Blades, and HPE BladeSystem, HPE 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.

Service and Support

To see recommended HPE Pointnext operational services for your HPE product (4 and 5 year Service offerings are also available) see HPE Moonshot 1500 Chassis Opt OS Quick Specs.

http://www8.hp.com/us/en/products/servers/moonshot/index.html  

For more information

To learn more on HPE Moonshot System, please contact your Hewlett Packard Enterprise sales representative.

Parts and Materials

Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements.

Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as part of these services.

The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by Hewlett Packard Enterprise due to malfunction.

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an Hewlett Packard Enterprise approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.

NOTE:  If you want to configure the HPE Moonshot 1500 Chassis Opt OS with cartridges, proceed to the HPE Moonshot 1500 Chassis Opt OS Quick Specs

http://www8.hp.com/us/en/products/servers/moonshot/index.html

NOTE:  If you want to configure a cartridge only, proceed to Step 1

Step 1: Base Configuration (Choose upgrade kit)

HPE Moonshot Server Upgrade Kit

HP Moonshot Server Multipack

NOTE:NOTE: up to 15 cartridges of any kind fit in this multipack

NOTE:NOTE:  Mixed Cartridge configuration is supported

814659-B21

Step 2: Pick Moonshot Servers

HPE Moonshot Server

HP ProLiant m400 1P X-Gene CPU 64GB Configure-to-order Server Cartridge

NOTE:NOTE:  Mixed Cartridge configuration is supported
NOTE:NOTE: Each Moonshot server comes preconfigured with eight 8 GB SODIMM pre-installed.
NOTE:NOTE: Each Moonshot cartridge is pre-configured with a single AppliedMicro® X-Gene^TM Processor running at 2.4 GHz. This processor is eight-core and contains 1 MB Cache shared per two cores. The X-Gene is 64-bit ARM and is compatible with the Cortex-A57 instruction set.

721717-B21

Step 4: To Select a different cartridge see details:

http://www8.hp.com/us/en/products/servers/moonshot/index.html

Server Cartridge

HPE Moonshot m400 Server Cartridge Dimensions
(H x W x D)

6.57 x 7.23 x 0.78in (16.71 x 18.37 x 1.98cm)

Typical Power

60W

Max Power

85.1W

System Inlet Temperature

Operating

50° to 95° F (10° to 35° C) at sea level with an altitude derating of 1.8°F per every 1000 ft (1.0°C per every 304.8 m) above sea level to a maximum of 10,000 ft (3048 m), no direct sustained sunlight. Maximum rate of change is 18°F/hr (10°C/hr). The upper limit may be limited by the type and number of options installed.
System performance may be reduced if operating with a fan fault or above 86°F (30°C).

Non-operating

-22° to 140° F (-30° to 60° C)
Maximum rate of change is 36°F/hr (20°C/hr).

Relative Humidity
(non-condensing)

Operating

10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing.

Non-operating

5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.

Altitude

Operating

10,000 ft (3048 m). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 1500 ft/min (457 m/min).

Non-operating

30,000 ft (9144 m). Maximum allowable altitude change rate is 1500 ft/min (457 m/min).

Environment-friendly Products and Approach

End-of-life Management and Recycling

Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest Hewlett Packard Enterprise sales office. Products returned to Hewlett Packard Enterprise will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard Enterprise web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HPE OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment.

Date

Version History

Action

Description of Change

23-Oct-2017

Version 11

Changed

Care Pack naming and Service and Support- Parts and Materials updated.

21-Oct-2016

From version 9 to 10

Updated

Update

28-Sept-2015

From version 8 to 9

Changed

Update several sections throughout the QS

17-Jul-2015

From version 7 to 8

Changed

Updates throughout the QuickSpecs

5-May-2015

From version 6 to 7

Update

Add chassis part number

17-Aug-2015

From version 5 to 6

Changed

Updates in configuration information and technical specifications

3-Feb-2015

From version 4 to 5

Changed

Changes throughout the QuickSpecs.

21-Jan-2015

From version 3 to 4

Changes

Changes in the configuration section

1-Dec-2014

From version 2 to 3

Changed

Changes throughout the QuickSpecs.

5-Nov-2014

From version 1 to 2

Changed

Changes in images and verbiage

29-Sept-2014

Version 1

Created

Create QS for the HPE ProLiant m400 Server Cartridge