HPE ProLiant DL360 Gen10 Plus - Carrier Grade Supplement: технические характеристики и документация
В архивеOverview
|
HPE ProLiant DL360 Gen10 Plus - Carrier Grade Supplement |
|
NEBS Level 3 and ETSI Certified This section lists some of the steps required to configure a Factory Integrated Model compliant with typically requested telecom carrirer NEBS and ETSI requirements. In addition to the worldwide compliance criteria applied to the commercial version of the product, all components listed in this document have been evaluated to the following criteria: SR-3580, Level 3, NEBS Criteria Levels
To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for information on configurable product offerings and requirements. Factory Integrated Models must start with a CTO Server. FIO indicates that this option is only available as a factory installable option. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server. Some options may not be integrated at the factory. Contact your local sales representative for additional information. Notes: To yield a carrier grade server that is compliant with all the required technical criteria, the product content is limited to what is listed in this document. In addition to this, the system maintenance switch #10 must be turned to the "ON" position to enable the expanded operating temperature range and hardware from the following kits MUST be installed: - HPE ProLiant DL36X Gen10 Plus High Performance Fan Kit - P26477-B21 - HPE ProLiant DL360 Gen10 Plus High Performance Heat Sink Kit - P19368-B21 Please refer to the HPE DL365 Gen10 Plus Carrier Grade Conversion documentation on the HPE web site: http://www.hpe.com/services/hpsc |
|
|
Configuration Information
|
This section lists some of the steps required to configure a Factory Integrated Model. To ensure valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.
|
||||||||||||||||||
|
| ||||||||||||||||||
|
Step 1: Base Configuration (choose one of the following configurable models)
Network Choice (NC) Models Network Choice models do not include embedded LOM. To enable networking capability please select a validated alternative NIC -OCP or PCIe- from the Core Options section.
| ||||||||||||||||||
|
| ||||||||||||||||||
|
Notes: - *HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet the needs of US Federal Government customers. These products are either manufactured or substantially transformed in a designated country. - Intel® Optane Persistent Memory 200 Series is only supported on Platinum, Gold or 4314 processors. | ||||||||||||||||||
|
|
|
Step 2: Choose Options | |
|
Please select one or two matching processors. For example: for a single Xeon-Platinum 8380 processor configuration select 1x P36941-B21. If dual Xeon-Platinum 8380 processor configuration, select 2x P36941-B21 Notes: - Mixing of 2 different processor models is not supported. - DIMM blanks kit (P07818-B21) recommended with processor TDPs ranging from 150W to 225W -both included- as enhance cooling. | |
|
Step 2a: Choose Processor Options |
|
|
Processor Option Kits |
|
|
3rd Generation Intel Xeon-Platinum |
|
|
Intel Xeon-Platinum 8352Y 2.2GHz 32-core 205W Processor for HPE |
P36929-B21 |
|
Intel Xeon-Platinum 8352V 2.1GHz 36-core 195W Processor for HPE |
P37599-B21 |
|
Intel Xeon-Platinum 8352S 2.2GHz 32-core 205W Processor for HPE |
P37613-B21 |
|
Intel Xeon-Platinum 8351N 2.4GHz 36-core 225W Processor for HPE |
P37602-B21 |
|
|
|
|
3rd Generation Intel Xeon-Gold |
|
|
Intel Xeon-Gold 6338N 2.2GHz 32-core 185W Processor for HPE |
P37603-B21 |
|
Intel Xeon-Gold 6338 2.0GHz 32-core 205W Processor for HPE |
P36928-B21 |
|
Intel Xeon-Gold 6336Y 2.4GHz 24-core 185W Processor for HPE |
P36926-B21 |
|
Intel Xeon-Gold 6330N 2.2GHz 28-core 165W Processor for HPE |
P37604-B21 |
|
Intel Xeon-Gold 6330 2.0GHz 28-core 205W Processor for HPE |
P36927-B21 |
|
Intel Xeon-Gold 6314U 2.3GHz 32-core 205W Processor for HPE |
P37610-B21 |
|
Intel Xeon-Gold 6312U 2.4GHz 24-core 185W Processor for HPE |
P37611-B21 |
|
Intel Xeon-Gold 5320 2.2GHz 26-core 185W Processor for HPE |
P36925-B21 |
|
Intel Xeon-Gold 5318Y 2.1GHz 24-core 165W Processor for HPE |
P36924-B21 |
|
Intel Xeon-Gold 5318S 2.1GHz 24-core 165W Processor for HPE |
P37612-B21 |
|
Intel Xeon-Gold 5318N 2.1GHz 24-core 150W Processor for HPE |
P37605-B21 |
|
3rd Generation Intel Xeon-Silver |
|
|
Intel Xeon-Silver 4316 2.3GHz 20-core 150W Processor for HPE |
P36923-B21 |
|
Intel Xeon-Silver 4314 2.4GHz 16-core 135W Processor for HPE |
P36922-B21 |
|
Intel Xeon-Silver 4310 2.1GHz 12-core 120W Processor for HPE |
P36921-B21 |
|
Intel Xeon-Silver 4309Y 2.8GHz 8-core 105W Processor for HPE |
P36920-B21 |
|
Step 2b: Choose Memory Options Please select one or more memory DIMMs from below. For new Gen10 Plus memory population rule whitepaper and optimal memory performance guidelines, please go to: http://www.hpe.com/docs/memory-population-rules For Gen10 Plus memory speed table, please go to: http://www.hpe.com/docs/amd-speed-table-Gen10Plus For memory Reliability, Accessibility, Serviceability (RAS) features whitepaper like Gen10 Plus Fast Fault Tolerance and legacy mirrored memory feature etc. please go to: http://www.hpe.com/docs/memory-ras-feature. Notes: - The maximum memory speed and capacity is a function of the memory type, memory configuration, and processor model. - Quantity of memory DIMMs selected per socket must be 1, 2, 4, 6, 8, 12 or 16. - For additional information, please see the HPE DDR4 Smart Memory QuickSpecs | |
|
Registered DIMMs (RDIMMs) |
|
|
HPE 64GB (1x64GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit |
P06035-B21 |
|
HPE 32GB (1x32GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit |
P06033-B21 |
|
HPE 32GB (1x32GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit |
P40007-B21 |
|
HPE 16GB (1x16GB) Dual Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit |
P06031-B21 |
|
HPE 16GB (1x16GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit |
P06029-B21 |
|
HPE 8GB (1x8GB) Single Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit |
P07525-B21 |
|
HPE DIMM blanks |
|
|
HPE DDR4 DIMM Blank Kit |
P07818-B21 |
|
Step 2c: Choose Power Supplies Please select one or two power supplies from below. Notes: Mixing of 2 different power supplies is NOT supported. | |
|
HPE Flex Slot Power Supplies |
|
|
HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit |
865434-B21 |
|
HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit |
865428-B21 |
|
HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit |
P17023-B21 |
|
HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit |
865434-B21 |
|
Step 2d: Choose backplane (8 SFF server only) If front drives are needed in the 8 SFF server, please select one backplane from list below. | |
|
HPE DL360 Gen10 Plus Basic Carrier (BC) drive backplanes |
|
|
HPE ProLiant DL360 Gen10 Plus 8SFF SAS/SATA 12G BC Backplane Kit |
P26427-B21 |
|
| |
Additional Options
|
Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of a Hewlett Packard Enterprise approved configurator. Contact your local sales representative for additional information. | |||
|
HPE Unique Options Risers | |||
|
HPE ProLiant DL36X Gen10 Plus Low Profile Riser Kit |
P26471-B21 | ||
|
|
| ||
|
| |||
|
Cooling Options | |||
|
HPE ProLiant DL360 Gen10 Plus High Performance Heat Sink Kit |
P26479-B21 | ||
|
HPE ProLiant DL36X Gen10 Plus High Performance Fan Kit |
P26477-B21 | ||
|
HPE DDR4 DIMM Blank Kit |
P07818-B21 | ||
|
| |||
|
Universal Media Bay Options | |||
|
HPE ProLiant DL360 Gen10 Plus 2SFF SAS/SATA 12G BC Drive Cage Kit |
P26435-B21 | ||
|
| |||
|
Optical Drive Options | |||
|
HPE 9.5mm SATA DVD-RW Optical Drive |
726537-B21 | ||
|
Notes:Requires Universal Media Bay Kit (P40003-B21) to install on 8 SFF models. |
| ||
|
| |||
|
System Insight Display Options | |||
|
HPE ProLiant DL360 Gen10 Plus SFF System Insight Display Power Module Kit |
P26447-B21 | ||
|
Notes: Removes iLO Service Port. |
| ||
|
| |||
|
Security | |||
|
HPE Trusted Platform Module 2.0 Gen10 Plus Black Rivets Kit |
P13771-B21 | ||
|
| |||
|
HPE Processors Please select one or two matching processors. For example: for a single Xeon-Platinum 8380 processor configuration select 1x P36941-B21. If dual Xeon-Platinum 8380 processor configuration, select 2x P36941-B21 Notes: Mixing of 2 different processor models is not supported. | |||
|
3rd Generation Intel Xeon-Platinum |
| ||
|
Intel Xeon-Platinum 8352Y 2.2GHz 32-core 205W Processor for HPE |
P36929-B21 | ||
|
Intel Xeon-Platinum 8352V 2.1GHz 36-core 195W Processor for HPE |
P37599-B21 | ||
|
Intel Xeon-Platinum 8352S 2.2GHz 32-core 205W Processor for HPE |
P37613-B21 | ||
|
Intel Xeon-Platinum 8351N 2.4GHz 36-core 225W Processor for HPE |
P37602-B21 | ||
|
Notes: - Requires High Performance Heatsink (P26479-B21) and Fans (P26477-B21). - DIMM blanks kit (P07818-B21) recommended as enhance cooling. - Single socket capable even though not being a "U" processor. No dual socket support. |
| ||
|
|
| ||
|
3rd Generation Intel Xeon-Gold |
| |||
|
Intel Xeon-Gold 6338N 2.2GHz 32-core 185W Processor for HPE |
P37603-B21 | |||
|
Intel Xeon-Gold 6338 2.0GHz 32-core 205W Processor for HPE |
P36928-B21 | |||
|
Intel Xeon-Gold 6336Y 2.4GHz 24-core 185W Processor for HPE |
P36926-B21 | |||
|
Intel Xeon-Gold 6330N 2.2GHz 28-core 165W Processor for HPE |
P37604-B21 | |||
|
Intel Xeon-Gold 6330 2.0GHz 28-core 205W Processor for HPE |
P36927-B21 | |||
|
Intel Xeon-Gold 6314U 2.3GHz 32-core 205W Processor for HPE |
P37610-B21 | |||
|
Intel Xeon-Gold 6312U 2.4GHz 24-core 185W Processor for HPE |
P37611-B21 | |||
|
Intel Xeon-Gold 5320 2.2GHz 26-core 185W Processor for HPE |
P36925-B21 | |||
|
Intel Xeon-Gold 5318Y 2.1GHz 24-core 165W Processor for HPE |
P36924-B21 | |||
|
Intel Xeon-Gold 5318S 2.1GHz 24-core 165W Processor for HPE |
P37612-B21 | |||
|
Intel Xeon-Gold 5318N 2.1GHz 24-core 150W Processor for HPE |
P37605-B21 | |||
|
3rd Generation Intel Xeon-Silver |
| |||
|
Intel Xeon-Silver 4316 2.3GHz 20-core 150W Processor for HPE |
P36923-B21 | |||
|
Intel Xeon-Silver 4314 2.4GHz 16-core 135W Processor for HPE |
P36922-B21 | |||
|
Intel Xeon-Silver 4310 2.1GHz 12-core 120W Processor for HPE |
P36921-B21 | |||
|
Intel Xeon-Silver 4309Y 2.8GHz 8-core 105W Processor for HPE |
P36920-B21 | |||
|
| ||||
|
HPE Memory Please select one or more memory DIMMs from below. For new Gen10 Plus memory population rule whitepaper and optimal memory performance guidelines, please go to: http://www.hpe.com/docs/memory-population-rules For Gen10 Plus memory speed table, please go to: http://www.hpe.com/docs/amd-speed-table-Gen10Plus For memory Reliability, Accessibility, Serviceability (RAS) features whitepaper like Gen10 Plus Fast Fault Tolerance and legacy mirrored memory feature etc. please go to: http://www.hpe.com/docs/memory-ras-feature.
Notes: For additional information, please see the HPE DDR4 Smart Memory QuickSpecs | ||||
|
| ||||
|
HPE DDR4 Memory |
| |||
|
Notes: DIMMs must be selected in quantities of 1, 2, 4, 6, 8, 12 or 16 per socket. |
| |||
|
Registered DIMMs (RDIMMs) |
| |||
|
HPE 64GB (1x64GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit |
P06035-B21 | |||
|
HPE 32GB (1x32GB) Dual Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit |
P06033-B21 | |||
|
HPE 32GB (1x32GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit |
P40007-B21 | |||
|
HPE 16GB (1x16GB) Dual Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit |
P06031-B21 | |||
|
HPE 16GB (1x16GB) Single Rank x4 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit |
P06029-B21 | |||
|
HPE 8GB (1x8GB) Single Rank x8 DDR4-3200 CAS-22-22-22 Registered Smart Memory Kit |
P07525-B21 | |||
|
HPE DIMM blanks |
| |||
|
HPE DDR4 DIMM Blank Kit |
P07818-B21 | |||
|
| ||||
|
HPE Boot Controllers |
| |||
|
HPE NS204i-p x2 Lanes NVMe PCIe3 x8 OS Boot Device |
P12965-B21 | |||
|
| ||||
|
HPE Storage Controllers |
| |
|
Notes: For additional details, please see HPE Smart Array Gen10 Plus Controllers QuickSpecs | ||
|
HPE Flexible Smart Array Controllers |
| |
|
HPE Smart Array P816i-a SR Gen10 (16 Internal Lanes/4GB Cache/SmartCache) 12G SAS Modular Controller |
804338-B21 | |
|
HPE Smart Array P408i-a SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS Modular Controller |
804331-B21 | |
|
HPE Smart Array E208i-a SR Gen10 (8 Internal Lanes/No Cache) 12G SAS Modular Controller |
804326-B21 | |
|
HPE Smart Array Controllers |
| |
|
HPE Smart Array P408e-p SR Gen10 (8 External Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller |
804405-B21 | |
|
HPE Smart Array P408i-p SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller |
830824-B21 | |
|
HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug-in Controller |
804398-B21 | |
|
HPE Smart Array E208i-p SR Gen10 (8 Internal Lanes/No Cache) 12G SAS PCIe Plug-in Controller |
804394-B21 | |
|
HPE Energy Packs |
| |
|
HPE 96W Smart Storage Lithium-ion Battery with 145mm Cable Kit |
P01366-B21 | |
|
HPE Smart Storage Hybrid Capacitor with 145mm Cable Kit |
P02377-B21 | |
|
| ||
|
Cable Kits | ||
|
HPE ProLiant DL360 Gen10 Plus SFF Internal Cable Kit |
P26449-B21 | |
|
HPE ProLiant DL36X Gen10 Plus 8SFF Tri-Mode Cable Kit |
P26451-B21 | |
|
HPE ProLiant DL36X Gen10 Plus Rear Serial Port Cable Kit |
P26475-B21 | |
|
| ||
|
HPE Hard Disk DrivesFor HDDs with optimal product availability, HPE advocates HDDs from the list located here: | ||
|
Enterprise - 12G SAS - SFF Basic Carrier Drives |
| |
|
HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor HDD |
P28352-B21 | |
|
HPE 1.2TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD |
P28586-B21 | |
|
HPE 900GB SAS 12G Mission Critical 15K SFF BC 3-year Warranty Multi Vendor HDD |
P40432-B21 | |
|
HPE 300GB SAS 12G Mission Critical 15K SFF BC 3-year Warranty Multi Vendor HDD |
P28028-B21 | |
|
HPE 300GB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD |
P40430-B21 | |
|
Midline - 6G SATA - SFF Basic Carrier Drives |
| |
|
HPE 1TB SATA 6G Business Critical 7.2K SFF BC 1-year Warranty HDD |
P28610-B21 | |
|
| ||
|
HPE Solid State Drives For SSD selection guidance, please visit https://ssd.hpe.com/ | ||
|
Read Intensive - 12G Value SAS - SFF Basic Carrier Solid State Drives |
| |
|
HPE 960GB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD |
P40506-B21 | |
|
Mixed Use - 12G Value SAS - SFF Basic Carrier Solid State Drives |
| |
|
HPE 3.84TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD |
P40512-B21 | |
|
Read Intensive - 6G SATA - SFF Basic Carrier Solid State Drives |
| |
|
HPE 3.84TB SATA 6G Read Intensive SFF BC Multi Vendor SSD |
P40500-B21 | |
|
HPE 1.92TB SATA 6G Read Intensive SFF BC Multi Vendor SSD |
P40499-B21 | |
|
HPE 960GB SATA 6G Read Intensive SFF BC Multi Vendor SSD |
P40498-B21 | |
|
HPE 480GB SATA 6G Read Intensive SFF BC Multi Vendor SSD |
P40497-B21 | |
|
HPE 240GB SATA 6G Read Intensive SFF BC Multi Vendor SSD |
P40496-B21 | |
|
Mixed Use - 6G SATA - SFF Basic Carrier Solid State Drives |
| |
|
HPE 3.84TB SATA 6G Mixed Use SFF BC Multi Vendor SSD |
P40505-B21 | |
|
HPE 1.92TB SATA 6G Mixed Use SFF BC Multi Vendor SSD |
P40504-B21 | |
|
HPE 960GB SATA 6G Mixed Use SFF BC Multi Vendor SSD |
P40503-B21 | |
|
HPE 480GB SATA 6G Mixed Use SFF BC Multi Vendor SSD |
P40502-B21 | |
|
Notes: Cannot be used with SR100i SW RAID. |
| |
|
| ||
|
HPE Networking |
| |
|
|
| |
|
1 Gigabit Ethernet adapters |
| |
|
Intel I350-T4 Ethernet 1Gb 4-port BASE-T Adapter for HPE |
P21106-B21 | |
|
10 Gigabit Ethernet adapters |
| |
|
Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T Adapter for HPE |
P26253-B21 | |
|
Broadcom BCM57412 Ethernet 10Gb 2-port SFP+ Adapter for HPE |
P26259-B21 | |
|
Intel X710-DA2 Ethernet 10Gb 2-port SFP+ Adapter for HPE |
P28787-B21 | |
|
25 Gigabit Ethernet adapters |
| |
|
Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE |
P26262-B21 | |
|
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE |
P08443-B21 | |
|
Mellanox MCX512F-ACHT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE |
P13188-B21 | |
|
100 Gigabit Ethernet adapters |
| |
|
Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE |
P25960-B21 | |
|
200 Gigabit Ethernet adapters |
| |
|
Mellanox MCX623105AS-VDAT Ethernet 200Gb 1-port QSFP56 Adapter for HPE |
P10180-B21 | |
|
OCP Adapters |
| |
|
Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE |
P08449-B21 | |
|
Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T OCP3 Adapter for HPE |
P10097-B21 | |
|
Intel X710-DA2 Ethernet 10Gb 2-port SFP+ OCP3 Adapter for HPE |
P28778-B21 | |
|
Marvell QL41132HQCU Ethernet 10Gb 2-port SFP+ OCP3 Adapter for HPE |
P08452-B21 | |
|
Mellanox MCX562A-ACAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE |
P10112-B21 | |
|
HPE ProLiant DL300 Gen10 Plus OCP x16 Enablement Kit |
P36661-B21 | |
|
HPE InfiniBand |
| |
|
HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe4 x16 MCX653105A-ECAT Adapter |
P23665-B21 | |
|
HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 MCX653106A-HDAT Adapter |
P31324-B21 | |
|
| ||
|
HPE Power Supplies HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Plus Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center. All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page. To review the power requirements for your selected system, please use the HPE Power Advisor Tool. For information on power specifications and technical content visit HPE Server power supplies. | |||
|
HPE Flex Slot Hot-plug Power supplies | |||
|
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit |
P38997-B21 | ||
|
HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit |
P17023-B21 | ||
|
HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit |
865434-B21 | ||
|
HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit |
865428-B21 | ||
|
| |||
|
HPE Computation and Graphics Accelerators | |||
|
NVIDIA T4 16GB Computational Accelerator for HPE |
R0W29C | ||
|
HPE Security |
| ||
|
HPE Trusted Platform Module 2.0 Gen10 Plus Black Rivets Kit |
P13771-B21 | ||
|
| |||
|
HPE Storage Options | |||
|
| |||
|
QLogic Fibre Channel HBAs |
| ||
|
HPE SN1100Q 16Gb Dual Port Fibre Channel Host Bus Adapter |
P9D94A | ||
|
| |||
|
HPE Rack Options
Rail Kits Notes: HPE rail kits are designed to work with HPE racks in compliance with industry standard EIA-310-E. In the event a customer elects to purchase a third-party rack for use with an HPE rail kit, any such use is at customer's own risk. HPE makes no express or implied warranties with respect to such third-party racks and specifically disclaims any implied warranties of merchantability and fitness for a particular purpose. Furthermore, HPE has no obligation and assumes no liability for the materials, design, specifications, installation, safety, and compatibility of any such third-party racks with any rail kits, including HPE rail kits. | |||
|
HPE ProLiant DL300 Gen10 Plus 1U SFF Easy Install Rail Kit |
P26485-B21 | ||
|
HPE ProLiant DL300 Gen10 Plus 1U Cable Management Arm for Rail Kit |
P26489-B21 | ||
|
| |||
|
HPE USB and SD Options |
| ||
|
HPE Enterprise Mainstream Flash Media Kits for Memory Cards |
| ||
|
HPE 32GB microSD RAID 1 USB Boot Drive |
P21868-B21 | ||
|
| |||
Technical Specifications
|
Environment-friendly Products and Approach - End-of-life Management and Recycling Hewlett Packard Enterprise offers end-of-life product return, trade-in, and recycling programs, in many geographic areas, for our products. Products returned to Hewlett Packard Enterprise will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard Enterprise web site. These instructions may be used by recyclers and other WEEE treatment facilities as well as Hewlett Packard Enterprise OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment. |
|
|
Summary of Changes
|
Date |
Version History |
Action |
Description of Change |
|
18-Mar-2024 |
Version 2 |
Changed |
Additional Options section was updated. |
|
03-Oct-2022 |
Version 1 |
New |
New QuickSpecs. |
Copyright
|
|
| |||||
|
|
|
© Copyright 2024 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
a50004310enw - 16914 - Worldwide - V2 - 18-March-2024 |






























