HPE ProLiant DL345 Gen11 - Carrier Grade Supplement: технические характеристики и документация
|
Shape the Future of QuickSpecs - Your Input Matters | |
|
HPE ProLiant DL345 Gen11 - Carrier Grade Supplement QuickSpecs
NEBS Level 3 and ETSI Certified This section lists some of the steps required to configure a Factory Integrated Model compliant with typically requested telecom carrier NEBS and ETSI requirements. |
|
|
In addition to the worldwide compliance criteria applied to the commercial version of the product, all components listed in this document have been evaluated to the following criteria: SR-3580, Level 3, NEBS Criteria Levels. |
To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for information on configurable product offerings and requirements. Factory Integrated Models must start with a CTO Server. FIO indicates that this option is only available as a factory installable option. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server. Some options may not be integrated at the factory. Contact your local sales representative for additional information. Notes: - To yield a carrier grade server that is compliant with all the required technical criteria, the product content is limited to what is listed in this document. In addition to this, the system maintenance switch #10 must be turned to the "ON" position to enable the expanded operating temperature range. For DL345 Gen11, HPE NEBS-compliant FIO Trigger System Setting (P40010-B21) must be selected at the factory when configuring a carrier grade server, and only a carrier grade server enabled at the factory can support future carrier grade upgrades. Hardware from the following kits MUST be installed:
Please refer to the HPE DL345 Gen11 Carrier Grade Conversion documentation on the HPE web site: http://www.hpe.com/services/hpsc
|
|
|
|
Consume IT On Your Terms HPE GreenLake edge-to-cloud platform brings the cloud experience directly to your apps and data wherever they are-the edge, colocations, or your data center. It delivers cloud services for on-premises IT infrastructure specifically tailored to your most demanding workloads. With a pay-per-use, scalable, point-and-click self-service experience that is managed for you, HPE GreenLake edge-to-cloud platform accelerates digital transformation in a distributed, edge-to-cloud world. - Get faster time to market. - Save on TCO, align costs to business. - Scale quickly, meet unpredictable demand. - Simplify IT operations across your data centers and clouds. To learn more about HPE Services, please contact your Hewlett Packard Enterprise sales representative or Hewlett Packard Enterprise Authorized Channel Partner. Contact information for a representative in your area can be found at "Contact HPE" https://www.hpe.com/us/en/contact-hpe.html For more information http://www.hpe.com/services
|
|
|
|
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for information on configurable product offerings and requirements. - Factory Integrated Models must start with a CTO Server. - FIO indicates that this option is only available as a factory installable option. - All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server. - Some options may not be integrated at the factory. Contact your local sales representative for additional information. |
|
|
|
|
|
Step 1: Base Configuration (choose one (1) of the following configurable models from the tables below) |
|
CTO Server |
HPE ProLiant DL345 Gen11 - Carrier Grade Supplement 8SFF Configure-to-order Server |
|
SKU Number |
P54205-B21 |
|
TAA SKU |
P54205-B21#GTA |
|
HPE Trusted Supply Chain |
P36394-B21 - Optional |
|
Processor |
Not included as standard |
|
DIMM Slots |
12-DIMM slots |
|
Storage Controller |
Choice of HPE Smart Array controllers |
|
PCIe |
2 PCIe x16 Riser (Primary slot 3 and Secondary slot 6) |
|
OCP3.0 slot |
2 PCIe 5.0 x8 |
|
Drive Cage - included |
Not included |
|
Network Controller |
Choice of either OCP 3.0 or select stand-up network adapters for primary networking selection plus additional/optional stand-up network adapters Notes: No embedded networking |
|
Cooling |
Choice of Standard or Performance Heat Sink Choice of Standard or Performance Fan Kit |
|
Management |
Default: HPE iLO Standard with Intelligent Provisioning, HPE OneView Standard (requires download), HPE Compute Ops Management (subscription included) |
|
Video |
1 VGA rear |
|
USB |
Front: 1 USB 3.2 Gen1 + iLO service port |
|
Security |
TPM2.0 (Trusted Platform Module) embedded |
|
Rail Kit |
Optional Easy Install rails and CMA |
|
Form Factor |
2U Rack |
|
Warranty |
3-year parts, 3-year labor, 3-year onsite support with next business day response. |
|
Notes: - HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet the needs of US Federal Government customers. These products are either manufactured or substantially transformed in a designated country. TAA compliance is only provided when HPE options are included as part of factory integrated orders (CTO). - TAA compliant configuration requires TAA versions of the CTO Server SKUs. - HPE Trusted Supply Chain (P36394-B21) is an optional security upgrade intended for agencies and regulated industries needing enhanced security and compliance needs. Applying this option to a DL345 Gen11 CTO server ensures it is built in the USA in a secured facility by vetted HPE personnel assigned to the manufacturing processes. A multitude of checkpoints/inspections for malicious microcode and counterfeit parts are performed throughout the server build, and additional safeguards are put in place against cyber-exploits throughout the server lifecycle. See "HPE Security" section within this document for more detail and learn more at http://www.hpe.com/security - All CTO servers are Energy Star 4.0 compliant.
| |
|
|
|
|
Step 2: Choose Core Options |
|
|
|
|
|
|
|
Step 3: Choose Additional Options |
|
- Choice of Support Services.
|
|
|
|
|
|
Choice of Core Options | ||||||||
|
|
| |||||||
|
Processor |
| |||||||
|
Please select ONE 4th or 5th Generation AMD EPYC Processor |
| |||||||
|
4th Gen AMD EPYC 9004 Series |
| |||||||
|
AMD EPYC 9654P 2.4GHz 96-core 360W Processor for HPE |
P53697-B21 | |||||||
|
AMD EPYC 9634 2.25GHz 84-core 290W Processor for HPE |
P53705-B21 | |||||||
|
AMD EPYC 9534 2.45GHz 64-core 280W Processor for HPE |
P53699-B21 | |||||||
|
AMD EPYC 9554P 3.1GHz 64-core 360W Processor for HPE |
P53703-B21 | |||||||
|
AMD EPYC 9454P 2.75GHz 48-core 290W Processor for HPE |
P53709-B21 | |||||||
|
AMD EPYC 9334 2.7GHz 32-core 210W Processor for HPE |
P53712-B21 | |||||||
|
AMD EPYC 9354P 3.25GHz 32-core 280W Processor for HPE |
P53704-B21 | |||||||
|
AMD EPYC 9384X 3.1GHz 32-core 320W Processor for HPE |
P63492-B21 | |||||||
|
AMD EPYC 9254 2.9GHz 24-core 200W Processor for HPE |
P53707-B21 | |||||||
|
AMD EPYC 9224 2.5GHz 24-core 200W Processor for HPE |
P58540-B21 | |||||||
|
AMD EPYC 9124 3.0GHz 16-core 200W Processor for HPE |
P53702-B21 | |||||||
|
5th Gen AMD EPYC 9005 Series |
| |||||||
|
AMD EPYC 9845 2.1GHz 160-core 390W Processor for HPE |
P72646-B21 | |||||||
|
AMD EPYC 9825 2.2GHz 144-core 390W Processor for HPE |
P72647-B21 | |||||||
|
AMD EPYC 9745 2.4GHz 128-core 400W Processor for HPE |
P72648-B21 | |||||||
|
AMD EPYC 9655P 2.6GHz 96-core 400W Processor for HPE |
P72662-B21 | |||||||
|
AMD EPYC 9645 2.3GHz 96-core 320W Processor for HPE |
P72649-B21 | |||||||
|
AMD EPYC 9535 2.4GHz 64-core 300W Processor for HPE |
P72652-B21 | |||||||
|
AMD EPYC 9115 2.6GHz 16-core 125W Processor for HPE |
P72659-B21 | |||||||
|
|
| |||||||
|
| ||||||||
|
Memory |
| |||||||
|
Please select one or more memory from below. For new DDR5 memory, please go to HPE DDR5 Smart Memory QuickSpecs For details on the Memory Population Rules and Guidelines with AMD EPYC 9004 series processors, please go to: https://www.hpe.com/psnow/doc/a50007481enw |
| |||||||
|
Notes: - Quantity of memory DIMMs selected per socket must be 1, 2, 4, 6, 8, 10, or 12. - The maximum memory speed and capacity is a function of the memory type, memory configuration, and processor model. - The maximum speed capability of the memory system is governed by the combination of the CPU and any other DIMMs installed in the server. If higher speed DIMMs are installed with a CPU that only supports a lower memory speed, the DIMMs will only run at the (lower) memory speed supported by the processor. Likewise, if memory DIMMs are mixed with slower DIMMs within a server, all DIMMs will run at the slower memory speed. For further information please refer to the Memory Population Rules for your specific server. | ||||||||
|
Registered DIMMs (RDIMMs) |
| |||||||
|
DDR5-4800 (applies to the 4th Generation AMD® EPYC® Processors) |
| |||||||
|
HPE 16GB (1x16GB) Single Rank x8 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit |
P50309-B21 | |||||||
|
HPE 32GB (1x32GB) Dual Rank x8 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit |
P50311-B21 | |||||||
|
HPE 64GB (1x64GB) Dual Rank x4 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit |
P50312-B21 | |||||||
|
HPE 96GB (1x96GB) Dual Rank x4 DDR5-4800 CAS-46-45-45 EC8 Registered Smart Memory Kit |
P66676-B21 | |||||||
|
DDR5-6400 (applies to the 5th Generation AMD® EPYC® Processors |
| |||||||
|
HPE 16GB (1x16GB) Single Rank x8 DDR5-6400 CAS-52-52-52 EC8 Registered Smart Memory Kit |
P64984-B21 | |||||||
|
|
| |||||||
|
| ||||||||
|
Storage
|
| |||||||
|
Drive cages |
| |||||||
|
HPE ProLiant DL385 Gen11 8SFF Tri-Mode U.3 x1 BC Backplane Kit |
P55082-B21 | |||||||
|
|
| |||||||
|
| ||||||||
|
Storage Controller |
|
| ||||||
|
HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug-in Controller |
804398-B21 |
| ||||||
|
HPE MR216i-o Gen11 x16 Lanes without Cache OCP SPDM Storage Controller |
P47789-B21 |
| ||||||
|
HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller |
P58335-B21 |
| ||||||
|
HPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller |
P47781-B21 |
| ||||||
|
HPE MR216i-p Gen11 x16 Lanes without Cache PCI SPDM Plug-in Storage Controller |
P47785-B21 |
| ||||||
|
HPE MR416i-p Gen11 x16 Lanes 8GB Cache PCI SPDM Plug-in Storage Controller |
P47777-B21 |
| ||||||
|
HPE SR932i-p Gen11 x32 Lanes 8GB Wide Cache PCI SPDM Plug-in Storage Controller |
P47184-B21 |
| ||||||
|
|
|
| ||||||
|
|
| |||||||
|
Battery and Hybrid Capacitor |
|
| ||||||
|
HPE Smart Storage Hybrid Capacitor with 145mm Cable Kit |
P02377-B21 |
| ||||||
|
HPE 96W Smart Storage Lithium-ion Battery with 145mm Cable Kit |
P01366-B21 |
| ||||||
|
HPE ProLiant DL325 Gen11 Megacell Extension Cable Kit |
P56659-B21 |
| ||||||
|
|
|
| ||||||
|
|
| |||||||
|
Storage Cables |
|
| ||||||
|
HPE ProLiant DL345 Gen11 8SFF x1 Primary Box 2/3 Tri-Mode Cable Kit |
P57123-B21 |
| ||||||
|
|
|
| ||||||
|
|
| |||||||
|
HPE Drives |
|
| ||||||
|
Solid State Drives |
|
| ||||||
|
For SSD selection guidance, please visit https://ssd.hpe.com/ |
|
| ||||||
|
Read Intensive - 12G SAS - SFF |
|
| ||||||
|
HPE 960GB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD |
P40506-B21 |
| ||||||
|
HPE 1.92TB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD |
P40507-B21 |
| ||||||
|
HPE 3.84TB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD |
P40508-B21 |
| ||||||
|
HPE 7.68TB SAS 12G Read Intensive SFF BC Value SAS Multi Vendor SSD |
P40509-B21 |
| ||||||
|
HPE 960GB SAS 24G Read Intensive SFF BC Multi Vendor SSD |
P49029-B21 |
| ||||||
|
HPE 1.92TB SAS 24G Read Intensive SFF BC Multi Vendor SSD |
P49031-B21 |
| ||||||
|
HPE 3.84TB SAS 24G Read Intensive SFF BC Multi Vendor SSD |
P49035-B21 |
| ||||||
|
Mixed Use - 12G SAS - SFF |
|
| ||||||
|
HPE 960GB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD |
P40510-B21 |
| ||||||
|
HPE 1.92TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD |
P40511-B21 |
| ||||||
|
HPE 3.84TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor SSD |
P40512-B21 |
| ||||||
|
HPE 800GB SAS 24G Mixed Use SFF BC Multi Vendor SSD |
P49047-B21 |
| ||||||
|
HPE 1.6TB SAS 24G Mixed Use SFF BC Multi Vendor SSD |
P49049-B21 |
| ||||||
|
HPE 3.2TB SAS 24G Mixed Use SFF BC Multi Vendor SSD |
P49053-B21 |
| ||||||
|
HPE 240GB SATA 6G Read Intensive SFF BC Multi Vendor SSD |
P40496-B21 |
| ||||||
|
HPE 480GB SATA 6G Read Intensive SFF BC Multi Vendor SSD |
P40497-B21 |
| ||||||
|
HPE 960GB SATA 6G Read Intensive SFF BC Multi Vendor SSD |
P40498-B21 |
| ||||||
|
HPE 1.92TB SATA 6G Read Intensive SFF BC Multi Vendor SSD |
P40499-B21 |
| ||||||
|
HPE 3.84TB SATA 6G Read Intensive SFF BC Multi Vendor SSD |
P40500-B21 |
| ||||||
|
HPE 7.68TB SATA 6G Read Intensive SFF BC Multi Vendor SSD |
P40501-B21 |
| ||||||
|
Mixed Use - 6G SATA - SFF |
|
| ||||||
|
HPE 480GB SATA 6G Mixed Use SFF BC Multi Vendor SSD |
P40502-B21 |
| ||||||
|
HPE 960GB SATA 6G Mixed Use SFF BC Multi Vendor SSD |
P40503-B21 |
| ||||||
|
HPE 1.92TB SATA 6G Mixed Use SFF BC Multi Vendor SSD |
P40504-B21 |
| ||||||
|
HPE 3.84TB SATA 6G Mixed Use SFF BC Multi Vendor SSD |
P40505-B21 |
| ||||||
|
Read Intensive - NVMe - SFF |
|
| ||||||
|
HPE 1.92TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 PM1733a SSD |
P50216-B21 |
| ||||||
|
HPE 3.84TB NVMe Gen4 High Performance Read Intensive SFF BC U.3 PM1733a SSD |
P50219-B21 |
| ||||||
|
HPE 960GB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static V2 Multi Vendor SSD |
P64842-B21 |
| ||||||
|
HPE 1.92TB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static V2 Multi Vendor SSD |
P64844-B21 |
| ||||||
|
HPE 3.84TB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static V2 Multi Vendor SSD |
P64846-B21 |
| ||||||
|
HPE 7.68TB NVMe Gen4 Mainstream Performance Read Intensive SFF BC U.3 Static V2 Multi Vendor SSD |
P64848-B21 |
| ||||||
|
Mixed Use - NVMe - SFF |
|
| ||||||
|
HPE 1.6TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PM1735a SSD |
P50227-B21 |
| ||||||
|
HPE 3.2TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PM1735a SSD |
P50230-B21 |
| ||||||
|
HPE 6.4TB NVMe Gen4 High Performance Mixed Use SFF BC U.3 PM1735a SSD |
P50233-B21 |
| ||||||
|
HPE 1.6TB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static V2 Multi Vendor SSD |
P65007-B21 |
| ||||||
|
HPE 3.2TB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static V2 Multi Vendor SSD |
P65015-B21 |
| ||||||
|
Hard Disk Drive |
|
| |||||||||||
|
Enterprise - 12G SAS - SFF Drives |
|
| |||||||||||
|
HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor HDD |
P28352-B21 |
| |||||||||||
|
HPE 1.2TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD |
P28586-B21 |
| |||||||||||
|
HPE 300GB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD |
P40430-B21 |
| |||||||||||
|
HPE 600GB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD |
P53561-B21 |
| |||||||||||
|
HPE 1.8TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor HDD |
P53562-B21 |
| |||||||||||
|
|
|
| |||||||||||
|
|
| ||||||||||||
|
Boot Controllers |
|
| |||||||||||
|
HPE ProLiant DL325 Gen11 NVMe/SATA M.2 Enablement Kit |
P57014-B21 |
| |||||||||||
|
Read Intensive - M.2 - Solid State Drives |
|
| |||||||||||
|
HPE 480GB SATA 6G Read Intensive M.2 Multi Vendor SSD |
P47818-B21 |
| |||||||||||
|
HPE 480GB NVMe Gen3 Mainstream Performance Read Intensive M.2 Multi Vendor SSD |
P40513-B21 |
| |||||||||||
|
HPE 960GB NVMe Gen3 Mainstream Performance Read Intensive M.2 Multi Vendor SSD |
P40514-B21 |
| |||||||||||
|
HPE 1.92TB NVMe Gen3 Mainstream Performance Read Intensive M.2 Multi Vendor SSD |
P40515-B21 |
| |||||||||||
|
|
|
| |||||||||||
|
|
| ||||||||||||
|
Risers |
|
| |||||||||||
|
HPE ProLiant DL345 Gen11 6 PCIe x16 Enablement Kit |
P57117-B21 |
| |||||||||||
|
|
|
| |||||||||||
|
|
| ||||||||||||
|
Factory Configuration Settings |
|
| |||||||||||
|
HPE NEBS-compliant FIO Trigger System Setting |
P40010-B21 |
| |||||||||||
|
Notes: Selecting this will enable expanded NEBS operating temperature range by turning ON system maintenance switch #10 |
|
| |||||||||||
|
|
|
| |||||||||||
|
|
| ||||||||||||
HPE Networking |
| ||||||||||||
|
PCIe Adapters |
| ||||||||||||
|
1 Gigabit Ethernet adapters |
| ||||||||||||
|
Intel I350-T4 Ethernet 1Gb 4-port BASE-T Adapter for HPE |
P21106-B21 | ||||||||||||
|
Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T Adapter for HPE |
P51178-B21 | ||||||||||||
|
10 Gigabit Ethernet adapters |
| ||||||||||||
|
Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T Adapter for HPE |
P26253-B21 | ||||||||||||
|
Broadcom BCM57412 Ethernet 10Gb 2-port SFP+ Adapter for HPE |
P26259-B21 | ||||||||||||
|
10/25 Gigabit Ethernet adapters |
| ||||||||||||
|
Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE |
P26262-B21 | ||||||||||||
|
Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE |
P26264-B21 | ||||||||||||
|
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE |
P08443-B21 | ||||||||||||
|
Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE |
P42044-B21 | ||||||||||||
|
Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE |
P08458-B21 | ||||||||||||
|
100/200 Gigabit Ethernet adapters |
| ||||||||||||
|
Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE |
P25960-B21 | ||||||||||||
|
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter for HPE |
P21112-B21 | ||||||||||||
|
OCP 3.0 Adapters |
| ||||||||||||
|
1 Gigabit Ethernet OCP adapters |
| ||||||||||||
|
Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE |
P08449-B21 | ||||||||||||
|
Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE |
P51181-B21 | ||||||||||||
|
10 Gigabit Ethernet OCP Adapters |
| ||||||||||||
|
Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T OCP3 Adapter for HPE |
P10097-B21 | ||||||||||||
|
10/25 Gigabit Ethernet OCP adapters |
| ||||||||||||
|
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE |
P10106-B21 | ||||||||||||
|
Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE |
P42041-B21 | ||||||||||||
|
100/200 Gigabit Ethernet adapters |
| ||||||||||||
|
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter for HPE |
P22767-B21 | ||||||||||||
|
|
| ||||||||||||
|
| |||||||||||||
|
HPE InfiniBand |
| ||||||||||||
|
HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe4 x16 MCX653105A-ECAT Adapter |
P23665-B21 | ||||||||||||
|
HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe4 x16 MCX653106A-ECAT Adapter |
P23666-B21 | ||||||||||||
|
|
| ||||||||||||
|
| |||||||||||||
|
Power and Cooling |
| ||||||||||||
|
Cooling |
| ||||||||||||
|
HPE ProLiant DL3X5 Gen11 2U Performance Heat Sink Kit |
P58459-B21 | ||||||||||||
|
HPE ProLiant DL3X5 Gen11 2U Performance Fan Kit |
P58465-B21 | ||||||||||||
|
|
| ||||||||||||
|
|
| ||||||||||||
|
Power Supplies |
|
| |||||||||||
|
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit |
P38995-B21 |
| |||||||||||
|
HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit |
P03178-B21 |
| |||||||||||
|
HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit |
P17023-B21 |
| |||||||||||
|
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit |
P38997-B21 |
| |||||||||||
|
HPE 1800W-2200W Flex Slot Titanium Hot Plug Power Supply Kit |
P44712-B21 |
| |||||||||||
|
HPE 1600W -48VDC Power Cable Lug Kit |
P36877-B21 |
| |||||||||||
|
Notes: Must be selected along with HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit (P17023-B21). |
|
| |||||||||||
|
|
|
| |||||||||||
|
|
| ||||||||||||
|
HPE Security |
|
| ||
|
HPE Bezel Lock Kit |
875519-B21 |
| ||
|
HPE Gen11 2U Bezel Kit |
P50400-B21 |
| ||
|
|
|
| ||
|
|
| |||
|
Additional Cable Options |
|
| ||
|
HPE ProLiant DL3X5 Gen11 OCP1 Upgrade Cable Kit |
P56658-B21 |
| ||
|
HPE ProLiant DL3X5 Serial Port Enablement Kit |
P50887-B21 |
| ||
|
|
|
| ||
|
| ||||
|
Rail Kits |
| |||
|
HPE DL3XX Gen11 Easy Install Rail 2 Kit |
P52351-B21 | |||
|
HPE DL38X Gen10 Plus 2U Cable Management Arm for Rail Kit |
P22020-B21 | |||
|
|
| |||
|
| ||||
|
Date |
Version History |
Action |
Description of Change |
|
22-Sep-2025 |
Version 3 |
Changed |
Core Options section was updated. |
|
Added |
5th Gen AMD EPYC Processors and 6400 MT/s DIMMs | ||
|
18-Aug-2025 |
Version 2 |
Changed |
Standard Features section was updated. |
|
03-Mar-2025 |
Version 1 |
New |
New QuickSpecs. |
|
|
|
Shape the Future of QuickSpecs - Your Input Matters | |
|
|
|
| |
|
|
|
Chat now | |
|
|
|
© Copyright 2025 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
AMD® and EPYC® are registered trademarks of Advanced Micro Devices Corporation in the U.S. and other countries.
Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the Microsoft group of companies.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less
a50009223enw - 17255 - Worldwide - V3 - 22-September-2025 | |
|
|
|
HEWLETT PACKARD ENTERPRISE Hpe.com |
|
