Dell OptiPlex XE4 Small Form Factor: характеристики и спецификации

Dimensions and weight

The following table lists the height, width, depth, and weight of your OptiPlex XE4 Small Form Factor.

Table 1. Dimensions and weight
The following table provides the detailed display specifications of OptiPlex XE4 Small Form Factor.
Description		Values
Height		290.00 mm (11.42 in.)
Width		92.60 mm (3.65 in.)
Depth		292.80 mm (11.53 in.)
Weight (maximum) NOTE:The weight of your computer depends on the configuration ordered and manufacturing variability.		Minimum: 4.20 kg (9.27 lb) Maximum: 5.63 kg (12.42 lb)

Processor

The following table lists the details of the processors that are supported by your OptiPlex XE4 Small Form Factor .

Table 1. Processor
The following table provides the various processor options that are supported for OptiPlex XE4 Small Form Factor.
Description	Option one	Option two	Option three	Option four	Option five	Option six	Option seven	Option eight
Processor type	12^th Generation Intel Core i3-12100	12^th Generation Intel Core i3-12300	12^th Generation Intel Core i5-12400	12^th Generation Intel Core i5-12500 vPro	12^th Generation Intel Core i5-12600 vPro	12^th Generation Intel Core i7-12700 vPro	12^th Generation Intel Core i9-12900 vPro	12^th Generation Intel Pentium Gold G7400
Processor wattage	60 W	60 W	65 W	65 W	65 W	65 W	65 W	46 W
Processor core count	4	4	6	6	6	12	16	2
Processor thread count	8	8	12	12	12	20	24	4
Processor speed	3.30 GHz to 4.30 GHz	3.50 GHz to 4.40 GHz	2.50 GHz to 4.40 GHz	3.00 GHz to 4.60 GHz	3.30 GHz to 4.80 GHz	2.10 GHz to 4.90 GHz	2.40 GHz to 5.10 GHz	up to 3.70 GHz
Processor cache	12 MB	12 MB	18 MB	18 MB	18 MB	25 MB	30 MB	6 MB
Integrated graphics	Intel UHD Graphics 730	Intel UHD Graphics 730	Intel UHD Graphics 730	Intel UHD Graphics 770	Intel UHD Graphics 770	Intel UHD Graphics 770	Intel UHD Graphics 770	Intel UHD Graphics 710

Chipset

The following table lists the details of the chipset that is supported in your OptiPlex XE4 Small Form Factor.

Table 1. Chipset The following table lists the details of the chipset that is supported in your OptiPlex XE4 Small Form Factor.
Description	Values
Chipset	Intel Q670
Processor	12^th Generation Intel Pentium Gold and Intel Core i3/i5/i7/i9
DRAM bus width	64-bit, dual-channel
Flash EPROM	16 MB (nRPMC) 32 MB (RPMC)
PCIe bus	Up to Gen 4.0

Operating system

Your OptiPlex XE4 Small Form Factor supports the following operating systems:

Windows 11 Home, 64-bit
Windows 11 Pro, 64-bit
Windows 11 Downgrade (Windows 10 image)
Windows 11 Pro National Education, 64-bit
Ubuntu Linux 20.04 LTS, 64-bit

Memory

The following table lists the memory specifications that are supported by your OptiPlex XE4 Small Form Factor.

Table 1. Memory specificationsThe following table lists the memory specifications of your computer.
Description	Values
Memory slots	Four UDIMM slots
Memory type	Dual-channel, DDR4
Memory speed	3200 MHz
Maximum memory configuration	128 GB
Minimum memory configuration	4 GB
Memory size per slot	4 GB, 8 GB, 16 GB, 32 GB
Memory configurations supported	4 GB, 1 x 4 GB, DDR4, 3200 MHz, single-channel 8 GB, 1 x 8 GB, DDR4, 3200 MHz, single-channel 8 GB, 2 x 4 GB, DDR4, 3200 MHz, dual-channel 16 GB, 1 x 16 GB, DDR4, 3200 MHz, single-channel 16 GB, 2 x 8 GB, DDR4, 3200 MHz, dual-channel 32 GB, 1 x 32 GB, DDR4, 3200 MHz, single-channel 32 GB, 2 x 16 GB, DDR4, 3200 MHz, dual-channel 32 GB, 4 x 8 GB, DDR4, 3200 MHz, dual-channel 64 GB, 2 x 32 GB, DDR4, 3200 MHz, dual-channel 64 GB, 4 x 16 GB, DDR4, 3200 MHz, dual-channel 128 GB, 4 x 32 GB, DDR4, 3200 MHz, dual-channel

Memory matrix

The following table lists the memory configurations supported on your OptiPlex XE4 Small Form Factor.

Table 1. Memory matrixThe following table provides the detailed memory configurations that are supported for your OptiPlex XE4 Small Form Factor.
Slot
Configuration	U-DIMM1	U-DIMM2	U-DIMM3	U-DIMM4
4 GB DDR4	4 GB
8 GB DDR4	4 GB		4 GB
8 GB DDR4	8 GB
16 GB DDR4	8 GB		8 GB
16 GB DDR4	16 GB
32 GB DDR4	32 GB
32 GB DDR4	16 GB		16 GB
32 GB DDR4	8 GB	8 GB	8 GB	8 GB
64 GB DDR4	32 GB		32 GB
64 GB DDR4	16 GB	16 GB	16 GB	16 GB
128 GB DDR4	32 GB	32 GB	32 GB	32 GB

External ports

The following table lists the external ports of your OptiPlex XE4 Small Form Factor.

Table 1. External ports
The following table lists ports and connectors available on OptiPlex XE4 Small Form Factor.
Description	Values
Network port	One RJ45 Ethernet port (rear)
USB ports	One USB 2.0 port with PowerShare (front) One USB 2.0 port (front) One USB 3.2 Gen 2 port (front) One USB 3.2 Gen 2x2 Type-C port (front) Three USB 3.2 Gen 1 ports (rear) One USB 3.2 Gen 2 port (rear) Two USB 2.0 ports with Smart Power On (rear)
Audio port	One Universal audio port (front) One re-tasking line-out/line-in audio port (rear)
Video port	Three DisplayPort 1.4 ports One VGA port (optional) One DisplayPort 1.4 port (optional) One HDMI 2.0b port (optional) One USB 3.2 Gen 2 Type-C port with DisplayPort Alt Mode (optional) NOTE:Download and install the latest Intel Graphics driver from www.dell.com/support to enable multiple displays.
Media-card reader	One SD-card 4.0 slot (front, optional)
Remote Power	One Remote power switch port
Security-cable slot	One Kensington lock slot One Padlock ring

Internal slots

The following table lists the internal slots of your OptiPlex XE4 Small Form Factor.

Table 1. Internal slotsThe following table lists the internal slots on your OptiPlex XE4 Small Form Factor.
Description	Values
PCIe Expansion	One Half-height Gen4 PCIe x16 slot One Half-height Gen3 PCIe x4 slot
SATA	Three SATA 3.0 slots for 3.5-inch/2.5-inch hard drive and slim optical drive
M.2	One M.2 2230 slot for WiFi and Bluetooth card Three M.2 2230/2280 slot for SSD 1st M.2 slot for 2230/2280 2nd M.2 slot for 2230 SSD 3rdt M.2 slot for 2280 SSD NOTE:To learn more about the features of different types of M.2 cards, see the knowledge base article 000144170 at Dell Support Site.

Ethernet

The following table lists the wired Ethernet Local Area Network (LAN) specifications of your OptiPlex XE4 Small Form Factor.

Table 1. Ethernet specifications
The following table provides the specifications of Ethernet that is supported by your OptiPlex XE4 Small Form Factor.
Description	Values
Model	Intel I219
Transfer rate	10/100/1000 Mbps

Wireless module

The following table lists the Wireless Local Area Network (WLAN) module specifications of your OptiPlex XE4 Small Form Factor.

Table 1. Wireless module specifications
The following table provides the wireless module specifications of OptiPlex XE4 Small Form Factor.
Description	Option one	Option two	Option three
Model number	Intel AX211	Intel Dual Band Wireless-AC 9462	MediaTek MT7921
Transfer rate	Up to 2400 Mbps	Up to 433 Mbps	Up to 1200 Mbps
Frequency bands supported	2.4 GHz/5/6 GHz	2.4 GHz/5 GHz	2.4 GHz/5 GHz
Wireless standards	IEEE 802.11a/b/g/n/ac/ax 160MHz channel use MU-MIMO 6GHz band	WiFi 802.11a/b/g Wi-Fi 4 (WiFi 802.11n) Wi-Fi 5 (WiFi 802.11ac)	WiFi 802.11a/b/g Wi-Fi 4 (WiFi 802.11n) Wi-Fi 5 (WiFi 802.11ac) Wi-Fi 6 (WiFi 802.11ax) MU-MIMO
Encryption	64-bit and 128-bit WEP 128-bit AES-CCMP TKIP 256-bit AES-GCMP	64-bit and 128-bit WEP 128-bit AES-CCMP TKIP	64-bit and 128-bit WEP 128-bit AES-CCMP TKIP
Bluetooth wireless card	5.2	5.1	5.2
	NOTE:The functionality of the Bluetooth wireless card may vary depending on the operating system that is installed on your computer.

Audio

The following table lists the audio specifications of your OptiPlex XE4 Small Form Factor.

Table 1. Audio specifications
The following table provides the detailed audio specifications of OptiPlex XE4 Small Form Factor.
Description	Values
Audio type	4 Channel High Definition Audio
Audio controller	Realtek Audio Controller, ALC3246-CG
Internal audio interface	Intel HDA (high-definition audio)
External audio interface	One Universal audio port (front) One Line-out audio port with re-tasking to Line-in(rear)

Storage

This section lists the storage options on your OptiPlex XE4 Small Form Factor.

Your computer supports one of the following configurations:

One 2.5 inch hard drive
Two 2.5 inch hard drives
One 3.5 inch hard drive
One M.2 2230/2280 solid-state drive (class 35 or class 40)
One M.2 2230/2280 solid-state drive (class 35 or class 40) and one 3.5 inch hard-disk drive
One M.2 2230/2280 solid-state drive (class 35 or class 40) and one 2.5 inch hard-disk drive
One M.2 2230/2280 solid-state drive (class 35 or class 40) and two 2.5 inch hard-disk drives
Two M.2 2230/2280 solid-state drive (class 35 or class 40) and one 3.5 inch hard-disk drive
Two M.2 2230/2280 solid-state drive (class 35 or class 40) and one 2.5 inch hard-disk drive
Two M.2 2230/2280 solid-state drive (class 35 or class 40) and two 2.5 inch hard-disk drives

The primary drive of your computer varies with the storage configuration. For computers:

with a M.2 solid-state drive, the M.2 solid-state drive is the primary drive
without a M.2 drive, either the 3.5-inch hard drive or one of the 2.5-inch hard drives is the primary drive

Table 1. Storage specifications
The following table provides the different storage options available on OptiPlex XE4 Small Form Factor.
Storage type	Interface type	Capacity
2.5-inch, 5400 RPM, hard-disk drive	SATA 3.0	Up to 2 TB
2.5-inch, 7200 RPM, hard-disk drive	SATA 3.0	Up to 1 TB
2.5-inch, 7200 RPM, Opal Self-Encrypting hard-disk drive	SATA 3.0	Up to 500 GB
3.5-inch, 5400 RPM, hard-disk drive	SATA 3.0	Up to 4 TB
3.5-inch, 7200 RPM, hard-disk drive	SATA 3.0	Up to 2 TB
M.2 2230, Class 35 solid-state drive	PCIe NVMe Gen3 x4	256 GB
M.2 2230, Class 35, Opal Self-Encrypting solid-state drive	PCIe NVMe Gen3 x4	256 GB
M.2 2280, Class 40 solid-state drive	PCIe NVMe Gen4 x4	2 TB
M.2 2280, Class 40, Opal Self-Encrypting solid-state drive	PCIe NVMe Gen3 x4	Up to 1 TB

Redundant Array of Independent Disks (RAID)

For optimal performance when configuring drives as a RAID volume, Dell Technologies recommends using identical drive models.

NOTE: RAID is not supported on Intel Optane configurations.

RAID 0 (Striped, Performance) volumes benefit from higher performance when drives are matched because the data is split across multiple drives: However, any I/O operations with block sizes larger than the stripe size will be constrained by the slowest drive in the array. For RAID 0 I/O operations where block sizes are smaller than the stripe size, whichever drive the I/O operation targets, determines the performance, which increases variability and results in inconsistent latencies. This variability is particularly pronounced for write operations, and it can be problematic for applications that are latency sensitive. One such example of this is any application that performs thousands of random writes per second in very small block sizes.

RAID 1 (Mirrored, Data Protection) volumes benefit from higher performance when drives are matched because the data is mirrored across multiple drives all I/O operations must be performed identically to both drives, thus variations in drive performance when the models are different result in the I/O operations completing only as fast as the slowest drive. While this does not suffer from the variable latency issue in small random I/O operations as with RAID 0 across heterogeneous drives, the impact is nonetheless large because the higher performing drive becomes limited in all I/O types. One of the worst examples of constrained performance here is when using unbuffered I/O. To ensure that that writes are fully committed to nonvolatile regions of the RAID volume, unbuffered I/O bypasses cache (for example by using the Force Unit Access bit in the NVMe protocol) and the I/O operation will not complete until all the drives in the RAID volume have completed the request to commit the data. This kind of I/O operation completely negates any advantage of a higher performing drive in the volume.

Care must be taken to match not only the drive vendor, capacity, and class, but also the specific model. Drives from the same vendor, with the same capacity, and even within the same class, can have different performance characteristics for certain types of I/O operations. Thus, matching by model ensures that the RAID volume consists of a homogeneous array of drives that deliver all the benefits of a RAID volume without incurring the additional penalties when one or more drives in the volume are lower performing.

OptiPlex XE4 Small Form Factor supports RAID with more than one hard drive configuration.

Media-card reader

The following table provides the specification of media cards supported by your OptiPlex XE4 Small Form Factor.

Table 1. Media-card reader specificationsThe following table provides the specification of media cards supported by your computer.
Description	Values
Media-card slot type	One SD 4.0 card slot
Media-cards supported	Secure Digital (mSD) Secure Digital High Capacity(mSDHC) Secure Digital Extended Capacity(mSDXC)
NOTE:The maximum capacity that is supported by the media-card reader varies depending on the standard of the media card that is installed on your computer.

Power ratings

The following table lists the power rating specifications of OptiPlex XE4 Small Form Factor.

Table 1. Power ratings
The following table provides the power rating specifications of OptiPlex XE4 Small Form Factor.
Description		Option one
Type		300 W (92% Efficient, 80 PLUS Platinum)
Input voltage		90 VAC - 264 VAC
Input frequency		47 Hz - 63 Hz
Input current (maximum)		4.2 A
Output current (continuous)		12 VA - 18 A 12 VB - 18 A Standby mode: 12 VA - 1.5 A 12 VB - 3.3 A
Rated output voltage		+12 VA +12 VB
Temperature range:
	Operating	5°C to 45°C (41°F to 113°F)
	Storage	-40°C to 70°C (-40°F to 158°F)

Power supply connector

The following table lists the Power supply connector specifications of your OptiPlex XE4 Small Form Factor.

Table 1. Power supply connector The following table lists the Power supply connector specifications of your OptiPlex XE4 Small Form Factor.
300 W (80 PLUS Platinum)	Two 4 pin connectors for processor One 8 pin connector for system board

GPU—Integrated

The following table lists the specifications of the integrated Graphics Processing Unit (GPU) supported by your OptiPlex XE4 Small Form Factor.

Table 1. GPU—Integrated
The following table provides the detailed integrated graphics specifications of OptiPlex XE4 Small Form Factor.
Controller	External display support	Memory size	Processor
Intel UHD Graphics 710	Three DisplayPort 1.4 ports	Shared-system memory	Intel Pentium Gold G7400 processors
Intel UHD Graphics 730	Three DisplayPort 1.4 ports	Shared-system memory	12^th Generation Intel Core i3-12100, i3-12300, and i5-12400 processors
Intel UHD Graphics 770	Three DisplayPort 1.4 ports	Shared-system memory	12^th Generation Intel Core i5-12500, i5-12600, i7-12700, and i9-12900 processors

GPU—Discrete

The following table lists the specifications of the discrete Graphics Processing Unit (GPU) supported by your OptiPlex XE4 Small Form Factor.

Table 1. GPU—Discrete
The following table provides the detailed discrete graphics specifications of OptiPlex XE4 Small Form Factor.
Controller	External display support	Memory size	Memory type
AMD Radeon RX640	Two Mini-DisplayPort 1.4 ports One DisplayPort 1.4 port	4 GB	GDDR5
AMD Radeon 550	Two DisplayPort 1.4 ports	2 GB	GDDR5
AMD Radeon 540	Two DisplayPort 1.4 ports	1 GB	GDDR5

Hardware security

The following table lists the hardware security of your OptiPlex XE4 Small Form Factor.

Table 1. Hardware security The following table provides the hardware security details on your OptiPlex XE4 Small Form Factor.
Hardware security
Kensington security-cable slot
Padlock ring
Chasis lock slot support
Chassis intrusion switch
Lockable cable covers
Supply chain tamper alerts
SafeID including Trusted Platform Module (TPM) 2.0
Smart card keyboard (FIPS)
Microsoft 10 Device Guard and Credential Guard (Enterprise SKU)
Microsoft Windows Bitlocker
Local hard drive data wipe through BIOS (Secure Erase)
Self-encrypting storage drives (Opal, FIPS)
Trusted Platform Module TPM 2.0
China TPM

Environmental

The following table lists the environmental specifications of your OptiPlex XE4 Small Form Factor.

Table 1. Environmental The following table lists the environmental specifications of your OptiPlex XE4 Small Form Factor.
Feature	Values
Recyclable packaging	Yes
BFR/PVC—free chassis	No
Vertical orientation packaging support	Yes
Multi-Pack packaging	No
Energy-Efficient Power Supply	Standard
ENV0424 compliant	Yes

NOTE: Wood‐based fiber packaging contains a minimum of 35% recycled content by total weight of wood‐based fiber. Packaging that contains without wood‐based fiber can be claimed as Not Applicable. The anticipated required criteria for EPEAT 2018.

Regulatory compliance

The following table lists the regulatory compliance of your OptiPlex XE4 Small Form Factor.

Table 1. Regulatory complianceThe following table lists the regulatory compliance of your OptiPlex XE4 Small Form Factor.
Regulatory compliance
Product Safety, EMC and Environmental Datasheets
Dell Regulatory Compliance Home page
Dell and the Environment

Operating and storage environment

This table lists the operating and storage specifications of your OptiPlex XE4 Small Form Factor.

Airborne contaminant level: G1 as defined by ISA-S71.04-1985

Table 1. Computer environment
The following table lists the operating and storage environment conditions of OptiPlex XE4 Small Form Factor.
Description	Operating	Storage
Temperature range	5°C–45°C (41°F–113°F)	-40°C-65°C (-40°F-149°F)
Relative humidity (maximum)	20% to 80% (non-condensing, Max dew point temperature = 26°C)	5% to 95% (non-condensing, Max dew point temperature = 33°C)
Vibration (maximum)^*	0.26 GRMS random at 5 Hz to 350 Hz	1.37 GRMS random at 5 Hz to 350 Hz
Shock (maximum)	Bottom/Right half-sine pulse 40G, 2ms	105G, 2ms half-sine pulse
Altitude range	3048 m (10,000 ft)	10,668 m (35,000 ft)
CAUTION:Operating and storage temperature ranges may differ among components, so operating or storing the device outside these ranges may impact the performance of specific components.

^{* Measured using a random vibration spectrum that simulates the user environment.}

^{† Measured using a 2 ms half-sine pulse.}

Dell OptiPlex XE4 Small Form Factor: технические характеристики и спецификации