Dell OptiPlex Tower Plus 7010: руководство по обслуживанию

Dimensions and weight

The following table lists the height, width, depth, and weight of your OptiPlex Tower Plus 7010.

Table 1. Dimensions and weight
The following table provides the detailed display specifications of OptiPlex Tower Plus 7010.
Description		Values
Height		367.00 mm (14.45 in.)
Width		169.00 mm (6.65 in.)
Depth		300.80 mm (11.84 in.)
Weight NOTE:The weight of your computer depends on the configuration ordered and manufacturing variability.		Minimum - 5.93 kg (13.07 lb) Maximum - 9.63 kg (21.24 lb)

Processor

The following table lists the details of the processors supported by your OptiPlex Tower Plus 7010.

Table 1. Processor
The following table provides the various processor options that are supported for OptiPlex Tower Plus 7010.
Description		Option one	Option two	Option three	Option four	Option five
Processor type		13^th Generation Intel Core i3-13100	13^th Generation Intel Core i5-13400	13^th Generation Intel Core i5-13500	13^th Generation Intel Core i5-13600	13^th Generation Intel Core i5-13600K, vPro
Processor wattage		60 W	65 W	65 W	65 W	125 W
Processor total core count		4	10	14	14	14
Performance-cores		4	6	6	6	6
Efficient-cores		0	4	8	8	8
Processor total thread counts NOTE:Intel® Hyper-Threading Technology is only available on Performance-cores.		8	16	20	20	20
Processor speed		3.40 GHz to 4.50 GHz	2.50 GHz to 4.60 GHz	2.50 GHz to 4.80 GHz	2.70 GHz to 5.00 GHz	3.50 GHz to 5.10 GHz
Performance-cores frequency
	Processor base frequency	3.40 GHz	2.50 GHz	2.50 GHz	2.70 GHz	3.50 GHz
	Maximum turbo frequency	4.50 GHz	4.60 GHz	4.80 GHz	5.00 GHz	5.10 GHz
Efficient-cores frequency
	Processor base frequency	NA	1.80 GHz	1.80 GHz	2.00 GHz	2.60 GHz
	Maximum turbo frequency	NA	3.30 GHz	3.50 GHz	3.70 GHz	3.90 GHz
Processor cache		12 MB	20 MB	24	24 MB	24MB
Integrated graphics		Intel UHD Graphics 730	Intel UHD Graphics 730	Intel UHD Graphics 770	Intel UHD Graphics 770	Intel UHD Graphics 770

Table 2. Processor
The following table provides the various processor options that are supported for OptiPlex Tower Plus 7010.
Description		Option six	Option seven	Option eight	Option nine
Processor type		13^th Generation Intel Core i7-13700	13^th Generation Intel Core i7-13700K, vPro	13^th Generation Intel Core i9-13900	13^th Generation Intel Core i9-13900K, vPro
Processor wattage		65 W	125 W	65 W	125 W
Processor total core count		16	16	24	24
Performance-cores		8	8	8	8
Efficient-cores		8	8	16	16
Processor total thread counts NOTE:Intel® Hyper-Threading Technology is only available on Performance-cores.		24	24	32	32
Processor speed		up to 5.10 GHz Turbo Boost Max	up to 5.30 GHz Turbo Boost Max	up to 5.20 GHz Thermal Velocity Boost	up to 5.40 GHz Thermal Velocity Boost
Performance-cores frequency
	Processor base frequency	2.10 GHz	3.40 GHz	2.00 GHz	3.00 GHz
	Maximum turbo frequency	5.10 GHz	5.30 GHz	5.20 GHz	5.40 GHz
Efficient-cores frequency
	Processor base frequency	1.50 GHz	2.50 GHz	1.50 GHz	2.20 GHz
	Maximum turbo frequency	4.10 GHz	4.20 GHz	4.20 GHz	4.30 GHz
Processor cache		30 MB	30 MB	36 MB	36 MB
Integrated graphics		Intel UHD Graphics 770	Intel UHD Graphics 770	Intel UHD Graphics 770	Intel UHD Graphics 770

Chipset

The following table lists the details of the chipset that is supported for your OptiPlex Tower Plus 7010.

Table 1. Chipset
The following table provides the chipset specifications for OptiPlex Tower Plus 7010.
Description	Values
Chipset	Intel Q670
Processor	13^th Generation Intel Core i3/i5/i7/i9
DRAM bus width	64-bit/128-bit
Flash EPROM	32MB RPMC+16MB nRPMC
PCIe bus	Upto Gen4

Operating system

Your OptiPlex Tower Plus 7010 supports the following operating systems:

Windows 11 Home
Windows 11 Pro
Windows 11 Pro Downgrade (Windows 10 image)
Windows 11 Pro National Education
Windows 11 CMIT Government Edition, (China only)
Ubuntu Linux 22.04 LTS

Memory

The following table lists the memory specifications of your OptiPlex Tower Plus 7010.

Table 1. Memory specificationsThe following table lists the memory specifications of your computer.
Description	Values
Memory slots	Four-UDIMM slots
Memory type	DDR5
Memory speed	3600 MT/s 4000 MT/s 4400 MT/s
Maximum memory configuration	128 GB
Minimum memory configuration	8 GB
Memory size per slot	8 GB, 16 GB, and 32 GB
Memory configurations supported	8 GB, 1 x 8 GB, DDR5, 4400 MT/s, single-channel 16 GB, 1 x 16 GB, DDR5, 4400 MT/s, single-channel 16 GB, 2 x 8 GB, DDR5, 4400 MT/s, dual-channel 32 GB, 1 x 32 GB, DDR5, 4400 MT/s, single-channel 32 GB, 2 x 16 GB, DDR5, 4400 MT/s, dual-channel 32 GB, 4 x 8 GB, DDR5, 4000 MT/s, dual-channel 64 GB, 2 x 32 GB, DDR5, 4400 MT/s, dual-channel 64 GB, 4 x 16 GB, DDR5, 4000 MT/s, dual-channel 128 GB, 4 x 32 GB, DDR5, 3600 MT/s, dual-channel

Memory matrix

The following table lists the memory configurations supported on your OptiPlex Tower Plus 7010.

Table 1. Memory matrixThe following table provides the detailed memory configurations that are supported for your OptiPlex Tower Plus 7010.
Configuration	Slot
	UDIMM1	UDIMM2	UDIMM3	UDIMM4
8 GB DDR5	8 GB	NA	NA	NA
16 GB DDR5	16 GB	NA	NA	NA
16 GB DDR5	8 GB	8 GB	NA	NA
32 GB DDR5	32 GB	NA	NA	NA
32 GB DDR5	16 GB	16 GB	NA	NA
32 GB DDR5	8 GB	8 GB	8 GB	8 GB
64 GB DDR5	32 GB	32 GB	NA	NA
64 GB DDR5	16 GB	16 GB	16 GB	16 GB
128 GB DDR5	32 GB	32 GB	32 GB	32 GB

External ports

The following table lists the external ports of your OptiPlex Tower Plus 7010.

Table 1. External ports
The following table lists ports and connectors available on OptiPlex Tower Plus 7010.
Description	Values
Network port	1 RJ45 Ethernet Port 10/100/1000 Mbps
USB ports	Front: One USB 2.0 (480 Mbps) port One USB 2.0 (480 Mbps) port with PowerShare One USB 3.2 Gen 2 (10 Gbps) port One USB 3.2 Gen 2x2 (20 Gbps) Type-C port Rear: Two USB 2.0 (480 Mbps) ports with Smart Power On One USB 3.2 Gen 2 (10 Gbps) port Three USB 3.2 Gen 1 (5 Gbps) ports
Audio port	Front : Universal audio jack port Rear : One Re-tasking line out/line in audio port
Video port	Three DisplayPort 1.4a (HBR2) NOTE:Maximum resolution up to 4096 x 2304 @60Hz One Optional video port (DisplayPort 1.4a (HBR3)/HDMI 2.1/VGA) (optional) NOTE:Maximum resolution HDMI 2.1: up to 4096 x 2160 @60Hz DisplayPort 1.4a (HBR3): up to 5120 x 3200 @60Hz VGA: up to 1920 x 1200 @60Hz USB Type-C with DisplayPort Alt mode: up to 5120 x 3200 @60Hz NOTE:Download and install the latest Intel Graphics driver from Dell Support Site to enable multiple displays.
I/O port	One Serial port (optional)
Media-card reader	One SD-card slot (optional)
Power-adapter port	NA
Security-cable slot	Security-cable slot (for Kensington locks) Padlock ring

Internal slots

The following table lists the internal slots of your OptiPlex Tower Plus 7010.

Table 1. Internal slotsThe following table lists the internal slots on your OptiPlex Tower Plus 7010.
Description	Values
Expansion	1 Full-height Gen 4 PCIe x16 slot 1 Full-height Gen 3 PCIe x4 open-end slot 1 Full-height PCI-32 slot 1 Full-height Gen 3 PCIe x1 slot
SATA	4 SATA slots for 2.5-inch/3.5-inch hard drive and slim optical drive
M.2	One M.2 2230 slot for WiFi and Bluetooth combo card Three M.2 2230/2280 slots for solid-state drives NOTE:To learn more about the features of different types of M.2 cards, search in the Knowledge Base Resource at Dell Support Site.

Ethernet

The following table lists the wired Ethernet Local Area Network (LAN) specifications of your OptiPlex Tower Plus 7010.

Table 1. Ethernet specifications
The following table provides the specifications of Ethernet that is supported by your OptiPlex Tower Plus 7010.
Description	Values
Model number	Intel WGI219LM
Transfer rate	10/100/1000 Mbps

Wireless module

The following table lists the Wireless Local Area Network (WLAN) modules that are supported on your OptiPlex Tower Plus 7010.

Table 1. Wireless module specifications
The following table provides the wireless module specifications of OptiPlex Tower Plus 7010.
Description	Option one	Option two
Model number	Intel AX211 NOTE:Intel AX211 is always tied with External SMA antenna	Realtek RTL8852BE
Transfer rate	2400 Mbps	1201 Mbps
Frequency bands supported	2.40 GHz/5 GHz/6 GHz NOTE:The 6 GHz frequency is supported on computers installed with Windows 11 operating system only.	2.40 GHz/5 GHz
Wireless standards	WiFi 802.11a/b/g Wi-Fi 4 (WiFi 802.11n) Wi-Fi 5 (WiFi 802.11ac) Wi-Fi 6E (WiFi 802.11ax)	WiFi 802.11a/b/g Wi-Fi 4 (WiFi 802.11n) Wi-Fi 5 (WiFi 802.11ac) Wi-Fi 6 (WiFi 802.11ax)
Encryption	64-bit/128-bit WEP AES-CCMP TKIP	64-bit/128-bit WEP AES-CCMP TKIP
Bluetooth wireless card	Bluetooth wireless card	Bluetooth wireless card
	NOTE:The version of the Bluetooth wireless card may vary depending on the operating system that is installed on your computer.

Audio

The following table lists the audio specifications of your OptiPlex Tower Plus 7010.

Table 1. Audio specifications
The following table provides the detailed audio specifications of OptiPlex Tower Plus 7010.
Description		Values
Audio controller		Realtek ALC3246-CG
Stereo conversion		Supported
Internal audio interface		HDA (high-definition audio)
External audio interface		Front : Universal audio jack port Rear : One Re-tasking line out/line in audio port
Number of speakers		One
Internal-speaker amplifier		Codec built-in amp
External volume controls		Not supported
Speaker output:
	Average speaker output	2 W
	Peak speaker output	2.5 W
Subwoofer output		Not supported
Microphone		Supported via Universal audio jack

Storage

This section lists the storage options on your OptiPlex Tower Plus 7010.

Table 1. Storage MatrixThe following table provides the storage configurations that are supported for your OptiPlex Tower Plus 7010.
Storage	1st M.2 socket (2230/2280)	2nd M.2 socket (2230/2280)	3rd M.2 socket (2230/2280)	1st 2.5-inch hard-drive	2nd 2.5-inch hard-drive	1st 3.5-inch hard-drive	2nd 3.5-inch hard-drive
M.2 solid-state drive (2230/80)	Yes(SSD0,Primary M.2 PCIe for boot function.)	No	No	No	No	No	No
M.2 solid-state drive (2230/80) X2	Yes(SSD0,Primary M.2 PCIe for boot function.)	Yes(SSD1)	No	No	No	No	No
M.2 solid-state drive (2230/80) X3	Yes(SSD0,Primary M.2 PCIe for boot function.)	Yes(SSD1)	Yes(SSD2)	No	No	No	No
M.2 solid-state drive (2230/80)+2.5-inch hard-drive	Yes(SSD0,Primary M.2 PCIe for boot function.)	No	No	Yes(SATA-0)	No	No	No
M.2 solid-state drive (2230/80) + 2.5-inch hard-drive X2	Yes(SSD0,Primary M.2 PCIe for boot function.)	No	No	Yes(SATA-0)	Yes(SATA-1)	No	No
M.2 solid-state drive (2230/80) +3.5-inch hard-drive	Yes(SSD0,Primary M.2 PCIe for boot function.)	No	No	No	No	Yes(SATA-0)	No
M.2 solid-state drive (2230/80) +3.5-inch hard-drive X2	Yes(SSD0,Primary M.2 PCIe for boot function.)	No	No	No	No	Yes(SATA-0)	Yes(SATA-1)
M.2 solid-state drive (2230/80) X2+2.5-inch hard-drive	Yes(SSD0,Primary M.2 PCIe for boot function.)	Yes(SSD1)	No	Yes(SATA-0)	No	No	No
M.2 solid-state drive (2230/80) X2+2.5-inch hard-drive X2	Yes(SSD0,Primary M.2 PCIe for boot function.)	Yes(SSD1)	No	Yes(SATA-0)	Yes(SATA-1)	No	No
M.2 solid-state drive (2230/80) X2+3.5-inch hard-drive	Yes(SSD0,Primary M.2 PCIe for boot function.)	Yes(SSD1)	No	No	No	Yes(SATA-0)	No
M.2 solid-state drive (2230/80) X2+3.5-inch hard-drive X2	Yes(SSD0,Primary M.2 PCIe for boot function.)	Yes(SSD1)	No	No	No	Yes(SATA-0)	Yes(SATA-1)
M.2 solid-state drive (2230/80) X3+2.5-inch hard-drive	Yes(SSD0,Primary M.2 PCIe for boot function.)	Yes(SSD1)	Yes(SSD2)	Yes(SATA-0)	No	No	No
M.2 solid-state drive (2230/80) X3+2.5-inch hard-drive X2	Yes(SSD0,Primary M.2 PCIe for boot function.)	Yes(SSD1)	Yes(SSD2)	Yes(SATA-0)	Yes(SATA-1)	No	No
M.2 solid-state drive (2230/80) X3+3.5-inch hard-drive	Yes(SSD0,Primary M.2 PCIe for boot function.)	Yes(SSD1)	Yes(SSD2)	No	No	Yes(SATA-0)	No
M.2 solid-state drive (2230/80) X3+3.5-inch hard-drive X2	Yes(SSD0,Primary M.2 PCIe for boot function.)	Yes(SSD1)	Yes(SSD2)	No	No	Yes(SATA-0)	Yes(SATA-1)
2.5-inch hard-drive	No	No	No	Yes(SATA-0,Primary SATA for boot function.)	No	No	No
2.5-inch hard-drive X2	No	No	No	Yes(SATA-0,Primary SATA for boot function.)	Yes(SATA-1)	No	No
3.5-inch hard-drive	No	No	No	No	No	Yes(SATA-0,Primary SATA for boot function.)	No
3.5-inch hard-drive X2	No	No	No	No	No	Yes(SATA-0,Primary SATA for boot function.)	Yes(SATA-1)
2.5-inch hard-drive+3.5-inch hard-drive	No	No	No	Yes(SATA-0,Primary SATA for boot function.)	No	Yes(SATA-1)	No
3.5-inch hard-drive+2.5-inch hard-drive				Yes(SATA-1)		Yes(SATA-0,Primary SATA for boot function.)
2.5-inch hard-drive X2+3.5-inch hard-drive	No	No	No	Yes(SATA-0,Primary SATA for boot function.)	Yes(SATA-1)	Yes(SATA-2)	No
3.5-inch hard-drive+2.5-inch hard-drive X2				Yes(SATA-1)	Yes(SATA-2)	Yes(SATA-0,Primary SATA for boot function.)
2.5-inch hard-drive X2+3.5-inch hard-drive X2	No	No	No	Yes(SATA-0,Primary SATA for boot function.)	Yes(SATA-1)	Yes(SATA-2)	Yes(SATA-3)
3.5-inch hard-drive X2+2.5-inch hard-drive X2	No	No	No	Yes(SATA-2)	Yes(SATA-3)	Yes(SATA-0,Primary SATA for boot function.)	Yes(SATA-1)

Table 2. Storage specifications
The following table provides the different storage options available on OptiPlex Tower Plus 7010.
Storage type	Interface type	Capacity
2.5-inch, 7200 RPM, hard-disk drive	SATA 3.0	Up to 1 TB
3.5-inch, 5400 RPM, hard-disk drive	SATA 3.0	Up to 4 TB
3.5-inch, 7200 RPM, hard-disk drive	SATA 3.0	Up to 2 TB
M.2 2230 solid-state drive	PCIe NVMe, Class 25	Up to 1 TB
M.2 2230 solid-state drive	PCIe NVMe, Class 35	Up to 1 TB
M.2 2230 Opal Self-Encrypting solid-state drive	PCIe NVMe, Class 35	256 GB
M.2 2280 solid-state drive	PCIe NVMe, Class 40	Up to 2 TB

Redundant Array of Independent Disks (RAID)

For optimal performance when configuring drives as a RAID volume, Dell Technologies recommends drive models that are identical.

NOTE: RAID is not supported on Intel Optane configurations.

RAID 0 (Striped, Performance) volumes benefit from higher performance when drives are matched because the data is split across multiple drives: any I/O operations with block sizes larger than the stripe size splits the I/O and become constrained by the slowest of the drives. For RAID 0 I/O operations where block sizes are smaller than the stripe size, whichever drive the I/O operation targets, determines the performance, which increases variability and results in inconsistent latencies. This variability is particularly pronounced for write operations, and it can be problematic for applications that are latency sensitive. One such example of this is any application that performs thousands of random writes per second in very small block sizes.

RAID 1 (Mirrored, Data Protection) volumes benefit from higher performance when drives are matched because the data is mirrored across multiple drives all I/O operations must be performed identically to both drives, thus variations in drive performance when the models are different result in the I/O operations completing only as fast as the slowest drive. While this does not suffer from the variable latency issue in small random I/O operations as with RAID 0 across heterogeneous drives, the impact is nonetheless large because the higher performing drive becomes limited in all I/O types. One of the worst examples of constrained performance here is when using unbuffered I/O. To ensure that that writes are fully committed to nonvolatile regions of the RAID volume, unbuffered I/O bypasses cache (for example by using the Force Unit Access bit in the NVMe protocol) and the I/O operation will not complete until all the drives in the RAID volume have completed the request to commit the data. This kind of I/O operation completely negates any advantage of a higher performing drive in the volume.

Care must be taken to match not only the drive vendor, capacity, and class, but also the specific model. Drives from the same vendor, with the same capacity, and even within the same class, can have different performance characteristics for certain types of I/O operations. Thus, matching by model ensures that the RAID volume consists of a homogeneous array of drives that deliver all the benefits of a RAID volume without incurring the additional penalties when one or more drives in the volume are lower performing.

OptiPlex Tower Plus 7010 supports RAID with more than one hard drive configuration.

Media-card reader

The following table lists the media cards that are supported on your OptiPlex Tower Plus 7010.

Table 1. Media-card reader specifications The following table lists the media cards that are supported on your computer.
Description	Values
Media-card type	SD card (optional)
Media-cards supported	Secure Digital (SD) Secure Digital High Capacity (SDHC) Secure Digital Extended Capacity (SDXC)
NOTE:The maximum capacity that is supported by the media-card reader varies depending on the standard of the media card that is installed on your computer.

Power ratings

The following table lists the power rating specifications of OptiPlex Tower Plus 7010.

Table 1. Power ratings
The following table provides the power rating specifications of OptiPlex Tower Plus 7010.
Description		Option one	Option two
Type		260 W internal power supply unit (PSU), 85% Efficient, 80 Plus Bronze	500 W internal power supply unit (PSU), 92% Efficient, 80 Plus Platinum
Input voltage		90 VAC–264 VAC	90 VAC–264 VAC
Input frequency		47 Hz-63 Hz	47 Hz-63 Hz
Input current (maximum)		4.2 A	7.0 A
Output current (continuous)		12 VA/18 A 12 VB/15 A Standby mode: 12 VA/1.5 A 12 VB/3.3 A	12 VA/18 A 12 VB/18 A 12 VC/12 A Standby mode: 12 VA/1.5 A 12 VB/3.3 A 12 VC/0 A
Rated output voltage		+12 VA +12 VB	+12 VA +12 VB +12 VC
Temperature range:
	Operating	5°C-45°C (41°F-113°F)	5°C-45°C (41°F-113°F)
	Storage	-40°C-70°C (-40°F-158°F)	-40°C-70°C (-40°F-158°F)

Power supply connector

The following table lists the Power supply connector specifications of your OptiPlex Tower Plus 7010.

Table 1. Power supply connector The following table lists the Power supply connector specifications of your OptiPlex Tower Plus 7010.
Power supply unit	Power supply unit connectors
260 W (80 PLUS Bronze)	Two 4 pin connectors for processor One 8 pin connector for system board
500 W (80 PLUS Platinum)	Two 4 pin connectors for processor One 8 pin connector for system board One 6 pin and one 2 + 6 pin connectors for graphic card

GPU—Integrated

The following table lists the specifications of the integrated Graphics Processing Unit (GPU) supported by your OptiPlex Tower Plus 7010.

Table 1. GPU—Integrated
The following table provides the detailed integrated graphics specifications of OptiPlex Tower Plus 7010.
Controller	External display support	Memory size	Processor
Intel UHD Graphics 730	Three DisplayPort 1.4a (HBR2) ports	Shared system memory	13^th Generation Intel Core i3/i5
Intel UHD Graphics 770	Three DisplayPort 1.4a (HBR2) ports	Shared system memory	13^th Generation Intel Core i5/i7/i9

Video port resolution (GPU—Integrated)

Table 1. Video port resolution (GPU—Integrated)The following table lists the integrated video port resolution for your OptiPlex Tower Plus 7010.
Graphics card	Video ports	Maximum supported resolution
Intel UHD Graphics	Three DisplayPort 1.4a port (HBR2) One Optional video port (DisplayPort 1.4a (HBR3)/VGA/USB Type-C with DisplayPort Alt mode)	DisplayPort 1.4a port - 4096 x 2304 @ 60 Hz One Optional video port - HDMI 2.1: up to 4096 x 2160 @60Hz DisplayPort 1.4a (HBR3): up to 5120 x 3200 @60Hz VGA: up to 1920 x 1200 @60Hz USB Type-C with DisplayPort Alt mode: up to 5120 x 3200 @60Hz

External display support (GPU—Integrated)

Display support for the integrated graphics card

Table 1. Display support specificationsThe following table provides the display support of the integrated graphics card through the back panel video portsOptiPlex Tower Plus 7010.
Graphics card	Supported external displays
Intel UHD Graphics 730/770	4
Intel UHD Graphics 730/770 + optional module	5

GPU—Discrete

The following table lists the specifications of the discrete Graphics Processing Unit (GPU) supported by your OptiPlex Tower Plus 7010.

Table 1. GPU—Discrete
The following table provides the detailed discrete graphics specifications of OptiPlex Tower Plus 7010.
Controller	External display support	Memory size	Memory type
AMD Radeon RX6300	Two DisplayPort 1.4a ports	2 GB	GDDR6
AMD Radeon RX6500	Two DisplayPort 1.4a ports	4 GB	GDDR6
NVIDIA GeForce RTX 3050	Three DisplayPort 1.4a ports One HDMI 2.1	8 GB	GDDR6
NVIDIA GeForce RTX 3070	Three DisplayPort 1.4a ports (Display Port 1.2 Certified. DP 1.3/1.4 Ready) One HDMI 2.1	8 GB	GDDR6X

Video port resolution

The following table lists the video port resolution for your OptiPlex Tower Plus 7010.

Table 1. Video port resolutionThe following table provides the video port resolution for your OptiPlex Tower Plus 7010.
Graphics card	Video ports	Maximum supported resolution
AMD Radeon RX6300	2 DisplayPort 1.4a ports	5120 x 2880 @60 Hz is the maximum resolution for one port configuration. (Requires DSC compression).
AMD Radeon RX6500	2 DisplayPort 1.4a ports	5120 x 2880 @60 Hz is the maximum resolution for one port configuration. (Requires DSC compression).
NVIDIA GeForce RTX 3050	2 DisplayPort 1.4a ports 1 HDMI 2.1 port	DisplayPort 1.4a port - 5120 x 3200 @60 Hz (Requires 2 DP 1.4a links and DSC compression). HDMI 2.1 port - 3840 x 2160 @60 Hz.
NVIDIA GeForce RTX 3070	3 DisplayPort 1.4a ports (Display Port 1.2 Certified. DP 1.3/1.4 Ready) 1 HDMI 2.1 port	DisplayPort 1.4a port - 5120 x 3200 @60 Hz (Requires 2 DP 1.4a links and DSC compression). HDMI 2.1 port - 3840 x 2160 @60 Hz.

External display support (GPU—Discrete)

Table 1. External display support (GPU—Discrete)The following table lists the external display support options for the discrete cards installed of your OptiPlex Tower Plus 7010.:
Graphics Card	Video ports	Number of supported external displays	DisplayPort Multi-Stream Transport (MST) support
AMD Radeon RX6300	Two DisplayPort 1.4a ports	2	Supported
AMD Radeon RX6500	Two DisplayPort 1.4a ports	2	Supported
Nvidia GeForce RTX 3050 OEM	Three DisplayPort 1.4a ports (Display Port 1.2 Certified. DP 1.3/1.4 Ready) One HDMI 2.1	4	Supported
Nvidia GeForce RTX 3070	Three DisplayPort 1.4a ports (Display Port 1.2 Certified. DP 1.3/1.4 Ready) One HDMI 2.1	4	Supported

NOTE: DisplayPort Multi-Stream Transport (MST) allows you to daisy chain monitors that have DisplayPort 1.2 and above ports and MST support. For more information about using DisplayPort Multi-Stream Transport, see Dell Support Site.

Hardware security

The following table lists the hardware security of your OptiPlex Tower Plus 7010.

Table 1. Hardware security The following table provides the hardware security details on your OptiPlex Tower Plus 7010.
Hardware security
Kensington security-cable slot
Padlock ring
Chassis lock slot support
Chassis intrusion switch
Lockable cable covers
Supply chain tamper alerts
SafeID including Trusted Platform Module (TPM) 2.0
Smart card keyboard (FIPS)
Microsoft Windows Device Guard and Credential Guard (Enterprise SKU)
Microsoft Windows Bitlocker
Local hard drive data wipe through BIOS (Secure Erase)
Self-encrypting storage drives (Opal, FIPS)
Trusted Platform Module TPM 2.0
China TPM
Intel Secure Boot
Intel Authenticate
SafeBIOS: includes Dell Off-host BIOS Verification, BIOS Resilience, BIOS Recovery, and additional BIOS Controls

Environmental

The following table lists the environmental specifications of your OptiPlex Tower Plus 7010.

Table 1. Environmental The following table lists the environmental specifications of your OptiPlex Tower Plus 7010.
Feature	Values
Recyclable packaging	Yes
BFR/PVC—free	No
Vertical orientation packaging support	No
Multi-Pack packaging	Yes (optional)
Energy-Efficient Power Supply	Standard
ENV0424 compliant	Yes

NOTE: Wood‐based fiber packaging contains a minimum of 35% recycled content by total weight of wood‐based fiber. Packaging that contains without wood‐based fiber can be claimed as Not Applicable. The anticipated required criteria for EPEAT 2018.

Regulatory compliance

The following table lists the regulatory compliance of your OptiPlex Tower Plus 7010.

Table 1. Regulatory complianceThe following table lists the regulatory compliance of your OptiPlex Tower Plus 7010.
Regulatory compliance
Product Safety, EMC and Environmental Datasheets
Dell Regulatory Compliance Home page
Dell and the Environment

Operating and storage environment

This table lists the operating and storage specifications of your OptiPlex Tower Plus 7010.

Airborne contaminant level: G1 as defined by ISA-S71.04-1985

Table 1. Computer environment
The following table lists the operating and storage environment conditions of OptiPlex Tower Plus 7010.
Description	Operating	Storage
Temperature range	10°C-35°C (50°F-95°F)	-40°C-70°C (-40°F-158°F)
Relative humidity (maximum)	20% to 80% (non-condensing) (non-condensing, Max dew point temperature = 26°C)	0% to 95% (non-condensing) 5% to 95% (non-condensing, Max dew point temperature = 33°C)
Vibration (maximum)^*	0.26 GRMS random at 5 Hz-350 Hz	1.37 GRMS random at 5 Hz-350 Hz
Shock (maximum)	Bottom/Right half-sine pulse 40G, 2 ms	105G, 2 ms half-sine pulse
Altitude range	-15.2 m to 3048 m (-49.8 ft to 10,000 ft)	-15.2 m to 10,668 m (-49.8 ft to 35,000 ft)
CAUTION:Operating and storage temperature ranges may differ among components, so operating or storing the device outside these ranges may impact the performance of specific components.

^{* Measured using a random vibration spectrum that simulates the user environment.}

^{† Measured using a 2 ms half-sine pulse.}