Dell OptiPlex 5090 Small Form Factor: характеристики и спецификации

Dimensions and weight

Table 1. Dimensions and weight
The following table provides the detailed display specifications of OptiPlex 5090.
Description		Values
Height:
	Front	290 mm (11.42 in.)
	Rear	290 mm (11.42 in.)
Width		92.60 mm (3.65 in.)
Depth		292.80 mm (11.53 in.)
Weight (minimum)		4.43 kg (9.76 lb)
Weight (maximum)		5.65 kg (12.53 lb) NOTE:The weight of your computer depends on the configuration ordered and the manufacturing variability.

Processors

The following table lists the details of the processors supported by your OptiPlex 5090.

Table 1. Processors
The following table provides the various processor options that are supported for OptiPlex 5090.
Processors	Wattage	Core count	Thread count	Speed	Cache	Integrated graphics
10^th Generation Intel Pentium Gold G6405	58 W	2	4	Up to 4.10 GHz	4 MB	Intel UHD Graphics 610
10^th Generation Pentium Gold G6505	58 W	2	4	Up to 4.20 GHz	4 MB	Intel UHD Graphics 630
10^th Generation Intel Core i3-10105	65 W	4	8	3.70 GHz to 4.40 GHz	6 MB	Intel UHD Graphics 630
10^th Generation Intel Core i3-10305	65 W	4	8	3.80 GHz to 4.50 GHz	8 MB	Intel UHD Graphics 630
10^th Generation Intel Core i5-10400	65 W	6	12	2.90 GHz to 4.30 GHz	12 MB	Intel UHD Graphics 630
10^th Generation Intel Core i5-10500	65 W	6	12	3.10 GHz to 4.50 GHz	12 MB	Intel UHD Graphics 630
10^th Generation Intel Core i5-10505	65 W	6	12	3.20 GHz to 4.60 GHz	12 MB	Intel UHD Graphics 630
10^th Generation Intel Core i5-10600	65 W	6	12	3.30 GHz to 4.80 GHz	12 MB	Intel UHD Graphics 630
10^th Generation Intel Core i7-10700	65 W	8	16	2.90 GHz to 4.80 GHz	16 MB	Intel UHD Graphics 630
11^th Generation Intel Core i5-11400	65 W	6	12	2.60 GHz to 4.40 GHz	12 MB	Intel UHD Graphics 730
11^th Generation Intel Core i5-11500	65 W	6	12	2.70 GHz to 4.60 GHz	12 MB	Intel UHD Graphics 750
11^th Generation Intel Core i5-11600	65 W	6	12	2.80 GHz to 4.80 GHz	12 MB	Intel UHD Graphics 750
11^th Generation Intel Core i7-11700	65 W	8	16	2.50 GHz to 4.90 GHz	16 MB	Intel UHD Graphics 750

Chipset

The following table lists the details of the chipset that is supported in your OptiPlex 5090.

Table 1. Chipset The following table lists the details of the chipset that is supported in your OptiPlex 5090.
Description	Option one	Option two
Processors	11^th Generation Intel Core i5/i7	10^th Generation Intel Pentium Gold, Core i3/i5/i7
Chipset	Intel Q570	Intel Q570
DRAM bus width	64-bit, Dual-channel	64-bit, Dual-channel
Flash EPROM	32 MB	32 MB
PCIe bus	Up to Gen 3.0	Up to Gen 3.0

Operating system

Your OptiPlex 5090 supports the following operating systems:

Windows 11 Home, 64-bit
Windows 11 Home National Academic, 64-bit
Windows 11 Pro, 64-bit
Windows 11 Pro National Academic, 64-bit
Windows 10 Home, 64-bit
Windows 10 Pro, 64-bit
Windows 10 Pro Education, 64-bit
Windows 10 IoT Enterprise 2019 LTSC (OEM only)
Windows 10 CMIT Government Edition, 64-bit (China only)
Ubuntu 20.04 LTS, 64-bit
Kylin Linux Desktop version 10.1 (China only)

Memory

The following table lists the memory specifications that are supported by your OptiPlex 5090.

Table 1. Memory specificationsThe following table lists the memory specifications of your computer.
Description	Values
Memory slots	Four UDIMM slots
Memory type	DDR4
Memory speed	2666/2933/3200 MHz
Maximum memory configuration	128 GB
Minimum memory configuration	4 GB
Memory size per slot	4 GB, 8 GB, 16 GB, 32 GB
Memory configurations supported	4 GB, 1 x 4 GB, DDR4, 2666 MHz for 10^th Generation Intel Pentium and Intel Core i3/i5 processors, 2933 MHz for 10^th Generation Intel Core i7, 3200 MHz for 11^th Generation Intel Core i5/i7 processors 8 GB, 1 x 8 GB, DDR4, 2666 MHz for 10^th Generation Intel Pentium and Intel Core i3/i5 processors, 2933 MHz for 10^th Generation Intel Core i7, 3200 MHz for 11^th Generation Intel Core i5/i7 processors 8 GB, 2 x 4 GB, DDR4, 2666 MHz for 10^th Generation Intel Pentium and Intel Core i3/i5 processors, 2933 MHz for 10^th Generation Intel Core i7, 3200 MHz for 11^th Generation Intel Core i5/i7 processors 16 GB, 1 x 16 GB, DDR4, 2666 MHz for 10^th Generation Intel Pentium and Intel Core i3/i5 processors, 2933 MHz for 10^th Generation Intel Core i7, 3200 MHz for 11^th Generation Intel Core i5/i7 processors 16 GB, 2 x 8 GB, DDR4, 2666 MHz for 10^th Generation Intel Pentium and Intel Core i3/i5 processors, 2933 MHz for 10^th Generation Intel Core i7 processors, 2933/3200 MHz for 11^th Generation Intel Core i5/ i7 processors 16 GB, 4 x 4 GB, DDR4, 2666 MHz for 10^th Generation Intel Pentium and Intel Core i3/i5 processors, 2933 MHz for 10^th Generation Intel Core i7 processors, 2933/3200 MHz for 11^th Generation Intel Core i5/ i7 processors 32 GB, 1 x 32 GB, DDR4, 2666 MHz for 10^th Generation Intel Pentium and Intel Core i3/i5 processors, 2933 MHz for 10^th Generation Intel Core i7 processors, 2933/3200 MHz for 11^th Generation Intel Core i5/ i7 processors 32 GB, 2 x 16 GB, DDR4, 2666 MHz for 10^th Generation Intel Pentium and Intel Core i3/i5 processors, 2933 MHz for 10^th Generation Intel Core i7 processors, 2933/3200 MHz for 11^th Generation Intel Core i5/ i7 processors 32 GB, 4 x 8 GB, DDR4, 2666 MHz for 10^th Generation Intel Pentium and Intel Core i3/i5 processors, 2933 MHz for 10^th Generation Intel Core i7 processors, 2933/3200 MHz for 11^th Generation Intel Core i5/ i7 processors 64 GB, 2 x 32 GB, DDR4, 2666 MHz for 10^th Generation Intel Pentium and Intel Core i3/i5 processors, 2933 MHz for 10^th Generation Intel Core i7 processors, 2933/3200 MHz for 11^th Generation Intel Core i5/ i7 processors 64 GB, 4 x 16 GB, DDR4, 2666 MHz for 10^th Generation Intel Pentium and Intel Core i3/i5 processors, 2933 MHz for 10^th Generation Intel Core i7 processors, 2933/3200 MHz for 11^th Generation Intel Core i7 processors 128 GB, 4 x 32 GB, DDR4,2666 MHz for Intel Pentium and Intel Core i3/i5 processors, 2933 MHz for 10^th Generation Intel Core i7 processors, 2933 MHz for 11^th Generation Intel Core i5/ i7 processors

Memory configuration matrix

Table 1. Memory configuration matrixThis table provides memory configuration matrix of your system:
Configuration	Slot
Configuration	XMM1	XMM2	XMM3	XMM4
4 GB DDR4	4 GB
8 GB DDR4	4 GB	4 GB
8 GB DDR4	8 GB
16 GB DDR4	8 GB	8 GB
16 GB DDR4	16 GB
32 GB DDR4	8 GB	8 GB	8 GB	8 GB
32 GB DDR4	16 GB	16 GB
32 GB DDR4	32 GB
64 GB DDR4	16 GB	16 GB	16 GB	16 GB
64 GB DDR4	32 GB	32 GB
64 GB DDR4	64 GB
128 GB DDR4	32 GB	32 GB	32 GB	32 GB

NOTE:Memory speed varies by different type of DPC (DIMM per Channel) installation.

NOTE:Systems configured with 128 GB memory will only run at 2933MHz.

NOTE:Memory on systems configured with 11^th Generation Intel processors will run at 2933 MHz clock speed when in Dual-channel mode.

Table 2. Dual-channel modeThe following table describes the scenarios where clock speeds drop to 2933 MHz:
Channel A	Channel B	Memory speed
2 UDIMM	None	2666/2933/3200 MHz
None	2 UDIMM	2666/2933/3200 MHz
2 UDIMM	2 UDIMM	2666/2933/3200 MHz

External ports and slots

The following table lists the external ports and slots of your OptiPlex 5090.

Table 1. External ports and slots
The following table lists ports and connectors available on OptiPlex 5090.
Description	Values
Network port	One RJ-45 port 10/100/1000 Mbps (rear)
USB ports	One USB 3.2 Gen 1 port (front) One USB 3.2 Gen 2 Type-C port (front) One USB 2.0 port (front) One USB 2.0 port with PowerShare (front) Four USB 3.2 Gen 1 ports (rear) Two USB 2.0 ports with SmartPower On (rear)
Audio port	One Universal audio port (front) One Line-out audio port with re-tasking to Line-in (rear)
Video port(s)	Two DisplayPort 1.4 ports (rear) One DisplayPort 1.4 port (rear, optional) One VGA port (rear, optional) One HDMI 2.0 port (rear, optional) One USB 3.2 Gen 2 Type-C port with DisplayPort Alt Mode (rear, optional) NOTE:Download and install the latest Intel Graphics driver from Dell Support Site to enable multiple displays.
Media-card reader	One SD 4.0 card slot (front, optional)
Power-adapter port	Not supported
Security-cable slot	One Kensington lock slot One Padlock ring

Internal slots

The following table lists the internal slots of your OptiPlex 5090.

Table 1. Internal slotsThe following table lists the internal slots on your OptiPlex 5090.
Description	Values
PCIe Expansion	One Half-height Gen3 PCIe x16 slot One Half-height Gen3 PCIe x4 slot
SATA	Three SATA 3.0 slot for 3.5-inch/2.5-inch hard drive and slim optical drive
M.2	One M.2 2230 slot for WiFi and Bluetooth card One M.2 2230/2280 slot for SSD/Intel Optane NOTE:To learn more about the features of different types of M.2 cards, see the knowledge base article SLN301626 at Dell Support Site.

Ethernet

The following table lists the wired Ethernet Local Area Network (LAN) specifications of your OptiPlex 5090.

Table 1. Ethernet specifications
The following table provides the specifications of Ethernet that is supported by your OptiPlex 5090.
Description	Values
Model	Intel I219
Transfer rate	10/100/1000 Mbps

Wireless module

The following table lists the Wireless Local Area Network (WLAN) module specifications of your OptiPlex 5090.

Table 1. Wireless module specifications
The following table provides the wireless module specifications of OptiPlex 5090.
Description	Option one	Option two	Option three
Model number	Qualcomm QCA61x4a	Qualcomm QCA9377	Intel AX201
Transfer rate	Up to 867 Mbps	Up to 433 Mbps	Up to 2400
Frequency bands supported	2.4 GHz/5 GHz	2.4 GHz/5 GHz	2.4 GHz/5 GHz
Wireless standards	WiFi 802.11a/b/g Wi-Fi 4 (WiFi 802.11n) Wi-Fi 5 (WiFi 802.11ac)	WiFi 802.11a/b/g Wi-Fi 4 (WiFi 802.11n) Wi-Fi 5 (WiFi 802.11ac)	WiFi 802.11a/b/g Wi-Fi 4 (WiFi 802.11n) Wi-Fi 5 (WiFi 802.11ac) Wi-Fi 6 (WiFi 802.11ax)
Encryption	64-bit and 128-bit WEP 128-bit AES-CCMP TKIP	64-bit and 128-bit WEP 128-bit AES-CCMP TKIP	64-bit and 128-bit WEP 128-bit AES-CCMP TKIP
Bluetooth wireless card	5.0	5.0	5.1
	NOTE:The functionality of the Bluetooth wireless card may vary depending on the operating system that is installed on your computer.

Audio

The following table lists the audio specifications of your OptiPlex 5090.

Table 1. Audio specifications
The following table provides the detailed audio specifications of OptiPlex 5090.
Description	Values
Audio type	Waves MaxxAudio
Audio controller	Waves MaxxAudio API
Internal audio interface	Intel HDA (high-definition audio)
External audio interface	One Universal audio port (front) One Line-out audio port with re-tasking to Line-in(rear)
Speakers	Not supported
Speaker output average	Not supported
Subwoofer output	Not supported
Microphone	Not supported

Storage

Your computer supports one of the following configurations:

Table 1. Storage MatrixThis table provides the storage matrix of your system:
Storage		1st 2.5-inch hard drive	2nd 2.5-inch hard drive	1st 3.5-inch hard drive	M.2 socket	1st Bootable Device
2.5-inch hard drive		Y	N	N	N	2.5-inch hard drive
Dual 2.5-inch hard drive		Y	Y	N	N	1st 2.5-inch hard drive
3.5-inch hard drive		N	N	Y	N	3.5-inch hard drive
M.2 PCIe solid-state drive		N	N	N	Y	1st M.2 solid-state drive
M.2 PCIe solid-state drive	3.5-inch hard drive	N	N	Y	Y	M.2 solid-state drive
M.2 PCIe solid-state drive	2.5-inch hard drive	N	Y	N	Y	1st M.2 solid-state drive
M.2 PCIe solid-state drive	Dual 2.5-inch hard drive	Y	Y	N	Y	M.2 solid-state drive
M.2 PCIe solid-state drive	M.2 PCIe solid-state drive via M.2 expansion card	N	N	N	Y	1st M.2 solid-state drive
M.2 Intel Optane	2.5-inch hard drive	Y	N	N	Y	2.5-inch hard drive
M.2 Intel Optane	Dual 2.5-inch hard drive	Y	Y	N	Y	2.5-inch hard drive
M.2 Intel Optane	3.5-inch hard drive	N	N	Y	Y	3.5-inch hard drive

Table 2. Storage specifications
The following table provides the different storage options available on OptiPlex 5090.
Storage type	Interface type	Capacity
2.5-inch, 5400 RPM, hard-disk drive	SATA 3.0	Up to 2 TB
2.5-inch, 7200 RPM, hard-disk drive	SATA 3.0	Up to 2 TB
3.5-inch, 7200 RPM, hard-disk drive	SATA 3.0	Up to 4 TB
M.2 2230, Class 35 solid-state drive	PCIe NVMe Gen3 x4	Up to 1 TB
M.2 2280, Class 40 solid-state drive	PCIe NVMe Gen3 x4	Up to 2 TB
M.2 2280 Opal Self-Encrypting solid-state drive	PCIe NVMe Gen3 x4, Class 40	Up to 1 TB

RAID (Redundant Array of Independent Disks)

For optimal performance when configuring drives as a RAID volume, Dell recommends drive models that are identical.

NOTE: RAID is not supported on Intel Optane configurations.

RAID 0 (Striped, Performance) volumes benefit from higher performance when drives are matched because the data is split across multiple drives: any I/O operations with block sizes larger than the stripe size splits the I/O and become constrained by the slowest of the drives. For RAID 0 I/O operations where block sizes are smaller than the stripe size, whichever drive the I/O operation targets determine the performance, which increases variability and results in inconsistent latencies. This variability is particularly pronounced for write operations, and it can be problematic for applications that are latency sensitive. One such example of this is any application that performs thousands of random writes per second in small block sizes.

RAID 1 (Mirrored, Data Protection) volumes benefit from higher performance when drives are matched because the data is mirrored across multiple drives: all I/O operations must be performed identically to both drives, thus variations in drive performance when the models are different, results in the I/O operations completing only as fast as the slowest drive. While this does not suffer the variable latency issue in small random I/O operations as with RAID 0 across heterogeneous drives, the impact is nonetheless large because the higher performing drive becomes limited in all I/O types. One of the worst examples of constrained performance here is when using unbuffered I/O. To ensure that writes are fully committed to non-volatile regions of the RAID volume, unbuffered I/O bypasses cache (for example by using the Force Unit Access bit in the NVMe protocol) and the I/O operation will not complete until all the drives in the RAID volume have completed the request to commit the data. This kind of IO operation completely negates any advantage of a higher performing drive in the volume.

Care must be taken to match not only the drive vendor, capacity, and class, but also the specific model. Drives from the same vendor, with the same capacity, and even within the same class, can have different performance characteristics for certain types of I/O operations. Thus, matching by model ensures that the RAID volumes are consisted of a homogeneous array of drives that deliver all the benefits of a RAID volume without incurring the additional penalties when one or more drives in the volume are lower performing.

OptiPlex 7080 supports RAID with more than one hard drive configuration.

Intel Optane memory

Intel Optane memory functions only as a storage accelerator. It neither replaces nor adds to the memory (RAM) installed on your computer.

NOTE:Intel Optane memory is supported on computers that meet the following requirements:

7^th Generation or higher Intel Core i3/i5/i7 processor
Windows 10 64-bit version or higher
Latest version of Intel Rapid Storage Technology driver

Table 1. Intel Optane memory
The following table provides the Intel Optane memory information for OptiPlex 5090.
Description	Values
Type	Memory/Storage/Storage accelerator
Interface	PCIe NVMe Gen3 x4
Connector	M.2 2280
Configurations supported	16 GB
Capacity	16 GB

Media-card reader

Table 1. Media-card reader specifications
The following table provides the media card specifications of your computer.
Feature	Description
Type	One SD 4.0 card slot (Optional)
Cards supported	Secure Digital (mSD) Secure Digital High Capacity(mSDHC) Secure Digital Extended Capacity(mSDXC)

Power ratings

The following table lists the power rating specifications of OptiPlex 5090.

Table 1. Power ratings
The following table provides the power rating specifications of OptiPlex 5090.
Description		Option one	Option two
Type		200 W (80 PLUS Bronze)	300W (80 PLUS Platinum)
Input voltage		90 VAC to 264 VAC	90 VAC to 264 VAC
Input frequency		47 Hz to 63 Hz	47 Hz to 63 Hz
Input current (maximum)		3.2 A	4.2 A
Output current (continuous)		12 VA/16.5 A 12 VB/14 A Standby mode: 12 VA/1.5 A 12 VB/2.5 A	12 VA/28 A 12 VB/18 A Standby mode: 12 VA/1.5 A 12 VB/3.3 A
Rated output voltage		+12 VA +12 VB	+12 VA +12 VB
Temperature range
	Operating	5°C to 45°C (41°F to 113°F)	5°C to 45°C (41°F to 113°F)
	Storage	-40°C to 70°C (-40°F to 158°F)	-40°C to 70°C (-40°F to 158°F)

Power Supply power cable specs

Table 1. Power Supply power cable specsThe following table gives details of the power supply power cable specifications:
Connector	Pin
200 W (80 PLUS Bronze)	Two 4 pin connectors for processor One 6 pin connector for system board
300 W (80 PLUS Platinum)	Two 4 pin connectors for processor One 6 pin connector for system board

GPU—Integrated

The following table lists the specifications of the integrated Graphics Processing Unit (GPU) supported by your OptiPlex 5090.

Table 1. GPU—Integrated
The following table provides the detailed integrated graphics specifications of OptiPlex 5090.
Controller	External display support	Memory size	Processor
Intel UHD Graphics 610	Two DisplayPort 1.4 ports	Shared system memory	10^th Generation Intel Pentium G6405 processor
Intel UHD Graphics 630	Two DisplayPort 1.4 ports	Shared system memory	10^th Generation Intel Pentium G6505 and Intel Core i3/i5/i7 processors
Intel UHD Graphics 730	Two DisplayPort 1.4 ports	Shared system memory	11^th Generation Intel Core i5-11400 processor
Intel UHD Graphics 750	Two DisplayPort 1.4 ports	Shared system memory	11^th Generation Intel Core i5/i7

GPU—Discrete

The following table lists the specifications of the discrete Graphics Processing Unit (GPU) supported by your OptiPlex 5090.

Table 1. GPU—Discrete
The following table provides the detailed discrete graphics specifications of OptiPlex 5090.
Controller	External display support	Memory size	Memory type
AMD Radeon RX640	Two Mini-DisplayPort 1.4 ports One DisplayPort 1.4 port	DDR5	4 GB
AMD Radeon 550	Two DisplayPort 1.4 ports	DDR5	2 GB
AMD Radeon 540	Two DisplayPort 1.4 ports	DDR5	1 GB

Multiple display support matrix

Table 1. Integrated - Multiple display support matrixThis table provides the multiple display support matrix for integrated graphics on your system:
Category	Description
Video ports on Integrated Graphics Card	2 DisplayPort 1.4 ports
Video port on Option Video module	2 DisplayPort 1.4 ports
Number of displays	3 displays (4096 x 2304 @60 Hz, 24 bpp)

Table 2. Discrete - Multiple display support matrixThis table provides the Multiple display support matrix for discrete graphics on your system:
Graphics Card	Radeon RX 640	Radeon 550	Radeon 540
Memory	4 GB GDDR5	2 GB GDDR5	1 GB GDDR5
Video Ports on Graphics Card	2 x Mini-DisplayPort 1 x DisplayPort	2 x DisplayPort	2 x DisplayPort
Max Displays (direct connect)	3	2	2
Max Displays (DP multi-stream)	4	4	4
Number of displays	3	2	2
Supported Resolution	5120 x 2880 60 Hz	5120 x 2880 60 Hz	5120 x 2880 60 Hz
Total Power	50 W	50 W	50 W

Operating and storage environment

This table lists the operating and storage specifications of your OptiPlex 5090.

Airborne contaminant level: G1 as defined by ISA-S71.04-1985

Table 1. Computer environment
The following table lists the operating and storage environment conditions of OptiPlex 5090.
Description	Operating	Storage
Temperature range	10 °C – 35°C (50 °F – 95°F)	-40°C - 65°C (-40°F - 149°F)
Relative humidity (maximum)	20% to 80% (non-condensing, Max dew point temperature = 26°C)	5% to 95% (non-condensing, Max dew point temperature = 33°C)
Vibration (maximum)^*	0.26 GRMS random at 5 Hz to 350 Hz	1.37 GRMS random at 5 Hz to 350 Hz
Shock (maximum)	Bottom half-sine pulse with a change in velocity of 40.20 cm/sec (20 in./sec)	105G half-sine pulse with a change in velocity of 105.20 cm/sec (52.5 in./sec)
Altitude range	-15.2 m to 3048 m (-49.86 ft to 10000 ft)	-15.2 m to 10668 m (-49.86 ft to 35000 ft)

CAUTION:Operating and storage temperature ranges may differ among components, so operating or storing the device outside these ranges may impact the performance of specific components.

^{* Measured using a random vibration spectrum that simulates user environment.}

^{† Measured using a 2 ms half-sine pulse when the hard drive is in use.}

Energy Star, EPEAT and Trusted Platform Module (TPM)

Table 1. Energy Star, EPEAT and TPMEnergy Star, EPEAT and TPM
Features	Specifications
Energy Star 8.0	Compliant configurations available
EPEAT	Gold and Silver compliant configurations available
Trusted Platform Module (TPM) 2.0^1,2	Integrated on system board
Firmware-TPM (Discrete TPM disabled)	Optional

NOTE:

¹TPM 2.0 is FIPS 140-2 certified.

²TPM is not available in all countries.

Dell OptiPlex 5090 Small Form Factor: технические характеристики и спецификации