Dell OptiPlex 7080 Micro: характеристики и спецификации

Dimensions and weight

Table 1. Dimensions and weight
The following table provides the detailed display specifications of OptiPlex 7080 Micro.
Description		Values
Height:
	Front	182.00 mm (7.16 in.)
	Rear	182.00 mm (7.16 in.)
Width		36.00 mm (1.42 in.)
Depth		178.56 mm (7.03 in.)
Weight (maximum)		1.28 kg (2.82 lb) (For 35 W) 1.29 kg (2.85 lb) (For 65 W) 1.38 kg (3.05 lb) (For discrete graphics) NOTE:The weight of your computer depends on the configuration ordered and the manufacturing variability.

Chipset

Table 1. Chipset
The following table provides the chipset specifications for OptiPlex 7080 Micro.
Description	Values
Chipset	Intel Q470
Processor	10^th Generation Intel Core i3/i5/i7/i9
DRAM bus width	64-bit (for single channel)
Flash EPROM	32 MB
PCIe bus	Up to Gen 3.0
Non-volatile memory	Yes
BIOS Configuration Serial Peripheral Interface (SPI)	256 Mbit (32 MB) located at SPI_FLASH on chipset
Trusted Platform Module (Discrete TPM Enabled)	24 KB located at TPM 2.0 on chipset
Firmware TPM (Discrete TPM Disabled)	By default the Platform Trust Technology feature is visible to the OS
NIC EEPROM	LOM configuration contained within SPI flash ROM instead of LOM e-fuse

Processors

NOTE:Global Standard Products (GSP) are a subset of Dell’s relationship products that are managed for availability and synchronized transitions on a worldwide basis. They ensure the same platform is available for purchase globally. This allows customers to reduce the number of configurations managed on a worldwide basis, thereby reducing their costs. They also enable companies to implement global IT standards by locking in specific product configurations worldwide.

Device Guard (DG) and Credential Guard (CG) are the new security features that are only available on Windows 10 Enterprise today.

Device Guard is a combination of enterprise-related hardware and software security features that, when configured together, will lock a device down so that it can only run trusted applications. If it is not a trusted application, it cannot run.

Credential Guard uses virtualization-based security to isolate secrets (credentials) so that only privileged system software can access them. Unauthorized access to these secrets can lead to credential theft attacks. Credential Guard prevents these attacks by protecting NTLM password hashes and Kerberos Ticket Granting Tickets.

NOTE:Processor numbers are not a measure of performance. Processor availability is subject to change and may vary by region/country.

Table 1. Processors
The following table provides the various processor options supported for OptiPlex 7080 Micro.
Processors	Wattage	Core count	Thread count	Speed	Cache	Integrated graphics	GSP	DG/CG Ready
10^th Generation Intel Core i3-10100T	35 W	4	8	3.0 GHz to 3.8 GHz	6 MB	Intel UHD Graphics 630	No	Yes
10^th Generation Intel Core i3-10300T	35 W	4	8	3.0 GHz to 3.9 GHz	8 MB	Intel UHD Graphics 630	No	Yes
10^th Generation Intel Core i5-10400T	35 W	6	12	2.0 GHz to 3.6 GHz	12 MB	Intel UHD Graphics 630	No	Yes
10^th Generation Intel Core i5-10500T	35 W	6	12	2.3 GHz to 3.8 GHz	12 MB	Intel UHD Graphics 630	Yes	Yes
10^th Generation Intel Core i5-10600T	35 W	6	12	2.4 GHz to 4.0 GHz	12 MB	Intel UHD Graphics 630	Yes	Yes
10^th Generation Intel Core i7-10700T	35 W	8	16	2.0 GHz to 4.5 GHz	16 MB	Intel UHD Graphics 630	Yes	Yes
10^th Generation Intel Core i9-10900T	35 W	10	20	1.9 GHz to 4.6 GHz	20 MB	Intel UHD Graphics 630	Yes	Yes
10^th Generation Intel Core i3-10100	65 W	4	8	3.6 GHz to 4.3 GHz	6 MB	Intel UHD Graphics 630	No	Yes
10^th Generation Intel Core i3-10300	65 W	4	8	3.7 GHz to 4.4 GHz	8 MB	Intel UHD Graphics 630	No	Yes
10^th Generation Intel Core i5-10400	65 W	6	12	2.9 GHz to 4.3 GHz	12 MB	Intel UHD Graphics 630	No	Yes
10th Generation Intel Core i5-10500	65 W	6	12	3.1 GHz to 4.5 GHz	12 MB	Intel UHD Graphics 630	Yes	Yes
10th Generation Intel Core i5-10600	65 W	6	12	3.3 GHz to 4.8 GHz	12 MB	Intel UHD Graphics 630	Yes	Yes
10th Generation Intel Core i7-10700	65 W	8	16	2.9 GHz to 4.8 GHz	16 MB	Intel UHD Graphics 630	Yes	Yes
10th Generation Intel Core i9-10900	65 W	10	20	2.8 GHz to 5.2 GHz	20 MB	Intel UHD Graphics 630	Yes	Yes

Operating system

Windows 10 Home (64-bit)
Windows 10 Professional (64-bit)
Windows 10 Pro Education (64-bit)
Windows 10 IoT Enterprise 2019 LTSC (OEM only)
NeoKylin 7.0 (China only)
Ubuntu 18.04 (64-bit)

Commercial Platform Windows 10 N-2 and 5-year operating system supportability

All newly introduced commercial platforms (Latitude, OptiPlex, and Precision) will qualify and ship with the most current factory installed Semi-Annual Channel Windows 10 version (N) and qualify (but not ship) the previous two versions (N-1, N-2). This device platform will RTS with Windows 10 version v19H2 at the time of launch, and this version will determine the N-2 versions that are initially qualified for this platform.

For future versions of Windows 10, Dell continues to test the commercial platform with coming Windows 10 releases during device production and for five years post-production, including both fall and spring releases from Microsoft.

Please reference the Dell Windows as a Service (WaaS) website for additional information about N-2 and 5-year Windows operating system supportability. Website can be found at this link:

Platforms Qualified on specific versions of Windows 10

This website also includes a matrix of other platforms that are qualified on specific versions of Windows 10.

Memory

NOTE:A multiple-DIMM memory option is recommended to prevent any performance reduction. If the system configuration includes integrated graphics, consider selecting 2 or more DIMMs.

NOTE:Memory modules should be installed in pairs of matched memory size, speed, and technology. If the memory modules are not installed in matched pairs, the computer continues to operate, but with a slight reduction in performance. The entire memory range is available to 64-bit operating systems.

Table 1. Memory specifications
The following table provides the detailed memory specifications of OptiPlex 7080 Micro.
Description		Values
Slots		Two SODIMM slots
Type		DDR4
Speed		2666 MHz for Intel Core Pentium/i3/i5 processors 2933 MHz for Intel Core i7/i9 processor NOTE:The Memory speed supported in Brazil for Intel Core i7/i9 processors is 2666 MHz
Maximum memory		64 GB
Minimum memory		4 GB
Memory size per slot		4 GB, 8 GB, 16 GB, 32 GB
Configurations supported		4 GB, 1 x 4 GB, DDR4, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7/i9 processor 8 GB, 2 x 4 GB, DDR4, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7/i9 processor 8 GB, 1 x 8 GB, DDR4, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7/i9 processor 16 GB, 2 x 8 GB, DDR4, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7/i9 processor 16 GB, 1 x 16 GB, DDR4, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7/i9 processor 32 GB, 2 x 16 GB, DDR4, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7/i9 processor 32 GB, 1 x 32 GB, DDR4, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7/i9 processor 64 GB, 2 x 32 GB, DDR4, 2666 MHz for Intel Core i3/i5 processors, 2933 MHz for Intel Core i7/i9 processor

Intel Optane memory

Intel Optane memory functions only as a storage accelerator. It neither replaces nor adds to the memory (RAM) installed on your computer.

NOTE:Intel Optane memory is supported on computers that meet the following requirements:

7^th Generation or higher Intel Core i3/i5/i7 processor
Windows 10 64-bit version or higher (Anniversary Update)
Latest version of Intel Rapid Storage Technology driver
UEFI boot mode configuration

Table 1. Intel Optane memory
The following table provides the Intel Optane memory information for OptiPlex 7080 Micro.
Description	Values
Type	Memory/Storage/Storage accelerator
Interface	Gen 3 PCIe x4 NVMe
Connector	M.2 2280
Configurations supported	16 GB
Capacity	16 GB

Ports and connectors

Table 1. Ports and connectors
The following table lists ports and connectors available on OptiPlex 7080 Micro.
Description	Values
External:
Network	One RJ-45 port 10/100/1000 Mbps (rear)
USB	Without discrete graphics: One USB 3.2 Gen 2 Type-A port with PowerShare (front) One USB 3.2 Gen 2 Type-C port (front) One USB 3.2 Gen 1 Type-A port (rear) Two USB 3.2 Gen 2 Type-A ports (rear) One USB 3.2 Gen 1 Type-A port with Smart Power on (rear) With discrete graphics: One USB 3.2 Gen 2 Type-A port with PowerShare (front) One USB 3.2 Gen 2 Type-C port (front) Two USB 3.2 Gen 2 Type-A ports (rear) One USB 3.2 Gen 1 Type-A port with Smart Power on (rear)
Audio	One Universal Audio Jack (front) One Line-out port (retaskable Line-in) (front)
Video	Two DisplayPort 1.4 port (rear) One VGA Port/DisplayPort 1.4 Port/HDMI 2.0b Port/ USB 3.2 Gen 2 Type-C Port with Alt-mode (optional) (Not supported with Discrete graphics) One Serial RS232 (optional) (Not supported with Discrete graphics) One Serial/PS2 port (optional) (Not supported with Discrete graphics)
Memory card reader	Not supported
Power port	4.5 mm DC barrel-type 7.4 mm DC barrel-type for 65 W CPU and discrete graphics
Security	One kensington security-cable slot
Antenna	Two SMA connectors (optional)
Internal:
SATA	One SATA slots for 2.5-inch Hard-disk drive
M.2	One M.2 2230 slot for WiFi/Bluetooth card One M.2 2230/2280 slot for PCIe solid-state drive/Intel Optane One M.2 2280 slot for PCIe solid-state drive/Intel Optane One SATA slots for 2.5-inch hard-disk drive (for 35 W and 65 W only) One half-height Gen3 PCIe x8 slot (discrete graphics) NOTE:To learn more about the features of different types of M.2 cards, see the knowledge base article SLN301626.

Communications

Ethernet

Table 1. Ethernet specifications
The following table provides the Ethernet specifications of OptiPlex 7080 Micro.
Description	Values
Model number	Intel i219-LM
Transfer rate	10/100/1000 Mbps

Wireless module

Table 2. Wireless module specifications
The following table provides the wireless module specifications of OptiPlex 7080 Micro.
Description	Values
Model number	Qualcomm QCA9377	Qualcomm QCA61x4A	Intel Wi-Fi 6 AX201
Transfer rate	Up to 867 Mbps	Up to 867 Mbps	Up to 2.4 Gbps
Frequency bands supported	2.4 GHz/5 GHz	2.4 GHz/5 GHz	2.4 GHz/5 GHz
Wireless standards	Wi-Fi 802.11 a/b/g Wi-Fi 4 (WiFi 802.11n) Wi-Fi 5 (WiFi 802.11ac)	802.11ac	802.11ax (Wi-Fi 6)
Encryption	64-bit and 128-bit WEP 128-bit AES-CCMP TKIP	64-bit and 128-bit WEP 128-bit AES-CCMP TKIP	64-bit and 128-bit WEP 128-bit AES-CCMP TKIP
Bluetooth	5.0	5.0	5.1

Graphics and Video controller

Table 1. Integrated graphics specifications
The following table provides the detailed integrated graphics specifications of OptiPlex 7080 Micro.
Integrated graphics
Controller	External display support	Memory size	Processor
Intel UHD Graphics 630	Two DisplayPort 1.4 HBR2 One VGA/DP 1.4 HBR2/HDMI2.0/USB Type-C Alt-mode (optional)	Shared system memory	10^th Generation Intel Core i3/i5/i7/i9

Table 2. Discrete graphics specifications
The following table provides the detailed discrete graphics specifications of OptiPlex 7080 Micro.
Discrete graphics
Controller	External display support	Memory size	Memory type
AMD Radeon RX 640	Two mini DisplayPort One DisplayPort 1.4	4 GB	GDDR5

Audio and Speaker

Table 1. Audio specificationsProvides the audio specification of your computer.
Description	Values
Type	4 Channel High Definition Audio
Controller	Realtek ALC3246
Stereo conversion	24-bit DAC (Digital-to-Analog) and ADC (Analog-to-Digital)
Internal interface	High definition audio interface
External interface	Universal Audio Jack Line-out
Speakers	One
Internal speaker amplifier	Integrated in ALC3246 (Class-D 2 W)
External volume controls	Keyboard shortcut controls
Speaker output average	2 W
Speaker output peak	2.5 W
Subwoofer output	Not supported
Microphone	Not supported

Storage

Your computer supports one of the following configurations:

One 2.5-inch hard-disk drive
One M.2 2230 or 2280 solid-state drive (class 35 or class 40)
Two M.2 2230 or 2280 solid-state drive (class 35 or class 40)
One 2.5-inch hard-disk drive and one M.2 16 or 32 GB Intel Optane memory

The primary drive of your computer varies with the storage configuration. For computers:

with a M.2 solid-state drive, the M.2 solid-state drive is the primary drive
with a M.2 Optane drive, the 2.5-inch hard-disk drive is the primary drive
without a M.2 drive, the 2.5-inch hard-disk drive is the primary drive

Table 1. Storage specifications
The following table provides the different storage options available on OptiPlex 7080 Micro.
Storage type	Interface type	Capacity
2.5-inch, 5400 RPM, hard-disk drive	SATA 3.0	Up to 2 TB
2.5-inch, 7200 RPM, hard-disk drive	SATA 3.0	Up to 1 TB
2.5-inch, 7200 RPM, FIPS Self Encrypting Opal 2.0, hard-disk drive	SATA 3.0	500 GB
2.5-inch. solid-state drive	SATA Class 20	512 GB
M.2 2230 solid-state drive	Gen 3 PCIe x4 NVMe, Class 35	Up to 512 GB
M.2 2280 solid-state drive	Gen 3 PCIe x4 NVMe, Class 40	Up to 2 TB
M.2 2280 Opal Self-Encrypting solid-state drive	Gen 3 PCIe x4 NVMe, Class 40	Up to 1 TB

RAID (Redundant Array of Independent Disks)

For optimal performance when configuring drives as a RAID volume, Dell recommends drive models that are identical.

NOTE: RAID is not supported on Intel Optane configurations.

RAID 0 (Striped, Performance) volumes benefit from higher performance when drives are matched because the data is split across multiple drives: any I/O operations with block sizes larger than the stripe size splits the I/O and become constrained by the slowest of the drives. For RAID 0 I/O operations where block sizes are smaller than the stripe size, whichever drive the I/O operation targets determine the performance, which increases variability and results in inconsistent latencies. This variability is particularly pronounced for write operations, and it can be problematic for applications that are latency sensitive. One such example of this is any application that performs thousands of random writes per second in small block sizes.

RAID 1 (Mirrored, Data Protection) volumes benefit from higher performance when drives are matched because the data is mirrored across multiple drives: all I/O operations must be performed identically to both drives, thus variations in drive performance when the models are different, results in the I/O operations completing only as fast as the slowest drive. While this does not suffer the variable latency issue in small random I/O operations as with RAID 0 across heterogeneous drives, the impact is nonetheless large because the higher performing drive becomes limited in all I/O types. One of the worst examples of constrained performance here is when using unbuffered I/O. To ensure that writes are fully committed to non-volatile regions of the RAID volume, unbuffered I/O bypasses cache (for example by using the Force Unit Access bit in the NVMe protocol) and the I/O operation will not complete until all the drives in the RAID volume have completed the request to commit the data. This kind of IO operation completely negates any advantage of a higher performing drive in the volume.

Care must be taken to match not only the drive vendor, capacity, and class, but also the specific model. Drives from the same vendor, with the same capacity, and even within the same class, can have different performance characteristics for certain types of I/O operations. Thus, matching by model ensures that the RAID volumes are consisted of a homogeneous array of drives that deliver all the benefits of a RAID volume without incurring the additional penalties when one or more drives in the volume are lower performing.

OptiPlex 7080 Micro supports RAID with more than one hard drive configuration.

Power adapter

Table 1. Power adapter specifications
The following table provides the detailed power adapter specifications of OptiPlex 7080 Micro.
Description		Values
Type		90 W (for 35 W CPU)	130 W (for 35 W CPU)	180 W (for 65 W CPU and discrete graphics)
Diameter (connector)		4.5 mm x 2.9 mm	4.5 mm x 2.9 mm	7.4 mm x 5.1 mm
Input voltage		100 VAC x 240 VAC	100 VAC x 240 VAC	100 VAC x 240 VAC
Input frequency		50 Hz x 60 Hz	50 Hz x 60 Hz	50 Hz x 60 Hz
Input current (maximum)		1.5 A	2.5 A	2.34 A
Output current (continuous)		4.62 A	6.7 A	9.23 A
Rated output voltage		19.50 VDC	19.50 VDC	19.50 VDC
Temperature range:
	Operating	0°C to 40°C (32°F to 104°F)	0°C to 40°C (32°F to 104°F)	0°C to 40°C (32°F to 104°F)
	Storage	-40°C to 70°C (-40°F to 158°F)	-40°C to 70°C (-40°F to 158°F)	-40°C to 70°C (-40°F to 158°F)

Add-in cards

Table 1. Add-in cardsAdd-in cards
Add-in cards
USB Type-C 3.1 PCIe Card
2nd-gigabit NIC add-in card
PCIe x1 5/2.5 GbE NIC
PCIe Serial Card (LP only)
PCIe Parallel Card (LP only)

Data security

Table 1. Data securityThe following table provides the list of Dell data security options:
Data security options	Values
McAfee Small Business Security 30 Day Free Trial	Supported
McAfee Small Business Security 12-month subscription	Supported
McAfee Small Business Security 36-month subscription	Supported
SafeGuard and Response, powered by VMware Carbon Black and Secureworks	Supported
Next Generation anti-virus (NGAV)	Supported
Endpoint Detection and Response (EDR)	Supported
Threat Detection and Response (TDR)	Supported
Managed Endpoint Detection and Response	Supported
Incident Management Retainer	Supported
Emergency Incident Response	Supported
SafeData	Supported

Environmental

Table 1. Environmental specificationsThe following table provides the environmental details for your computer:
Feature	OptiPlex 7080 Micro
Recyclable packaging	Yes
BFR/PVC—free chassis	No
MultiPack packaging	Yes (US only) (optional)
Energy-Efficient Power Supply	88%
ENV0424 compliant	Yes

NOTE:Wood‐based fiber packaging contains a minimum of 35% recycled content by total weight of wood‐based fiber. Packaging that contains without wood‐based fiber can be claimed as Not Applicable.

Energy Star, EPEAT and Trusted Platform Module (TPM)

Table 1. Energy Star, EPEAT and TPMEnergy Star, EPEAT and TPM
Features	Specifications
Energy Star 8.0	Compliant configurations available
EPEAT	Gold and Silver compliant configurations available
Trusted Platform Module (TPM) 2.0^1,2	Integrated on system board
Firmware-TPM (Discrete TPM disabled)	Optional

NOTE:

¹TPM 2.0 is FIPS 140-2 certified.

²TPM is not available in all countries.

Computer environment

Airborne contaminant level: G1 as defined by ISA-S71.04-1985

Table 1. Computer environment
The following table lists the operating and storage environment conditions of OptiPlex 7080 Micro.
Description	Operating	Storage
Temperature range	10°C–35°C (50°F–95°F)	-40°C-65°C (-40°F-149°F)
Relative humidity (maximum)	20% to 80% (non-condensing)	5% to 95% (non-condensing)
Vibration (maximum)^*	0.26 GRMS random at 5 Hz to 350 Hz	1.37 GRMS random at 5 Hz to 350 Hz
Shock (maximum)	Bottom half-sine pulse with a change in velocity of 50.8 cm/sec (20 in./sec)	105G half-sine pulse with a change in velocity of 133 cm/sec (52.5 in./sec)
Altitude (maximum)	3048 m (10,000 ft)	10,668 m (35,000 ft)

^{* Measured using a random vibration spectrum
that simulates user environment.}

^{† Measured
using a 2 ms half-sine pulse when the hard drive is in use.}

Service and support

NOTE:For more details on Dell Service Plans, see https://www.dell.com/learn/us/en/19/services/warranty-support-services.

Table 1. WarrantyThe following table provides information about the warranty available for your system:
Warranty
3 Years Basic Warranty with Hardware Service on site service after remote diagnosis
4 Years Basic Warranty Extension
5 Years Basic Warranty Extension
3 Years ProSupport and Next Business Day on-site service
4 Years ProSupport and Next Business Day on-site service
5 Years ProSupport and Next Business Day on-site service
3 Years ProSupport Plus for Client with Next Business Day on-site service
4 Years ProSupport Plus for Client with Next Business Day on-site service
5 Years ProSupport Plus for Client with Next Business Day on-site service

Table 2. Accidental damage servicesThe following table provides information about the accidental damage services available for your system:
Accidental Damage Services
3 Years Accidental Damage Service
4 Years Accidental Damage Service
5 Years Accidental Damage Service

Dell OptiPlex 7080 Micro: технические характеристики и спецификации