Определяем
Сегодня покупают
ГлавнаяСправочникиDellOptiPlex All-In-One
Dell OptiPlex 5400 All-in-One: технические характеристики и спецификации
← Вернуться назад
Нужна помощь с конфигурацией?
Пришлите SKU, спецификацию или список требований. Специалист Apltech проверит совместимость компонентов и найдёт актуальные артикулы
Получить консультацию →

Dell OptiPlex 5400 All-in-One: технические характеристики и спецификации

Dimensions and weight

The following table lists the height, width, depth, and weight of your OptiPlex 5400 All-in-One.

Table 1. Dimensions and weight

The following table provides the detailed display specifications of OptiPlex 5400 All-in-One.
Description Values
Height:
Front height

344.00 mm (13.54 in.)

Rear height

344.00 mm (13.54 in.)

Width

540.20 mm (21.26 in.)

Depth

52.60 mm (2.07 in.)

Weight
NOTE:The weight of your computer depends on the configuration ordered and manufacturing variability.
Weight without stand
  • 6.68 Kg (14.73 lbs.)—maximum
  • 6.05 Kg (13.34 lbs.)—minimum

Processor

The following table lists the details of the processors that are supported by your OptiPlex 5400 All-in-One .

NOTE:Global Standard Products (GSP) are a subset of Dell’s relationship products that are managed for availability and synchronized transitions on a worldwide basis. They ensure that the same platform is available for purchase globally. This allows customers to reduce the number of configurations managed on a worldwide basis, thereby reducing their costs. They also enable companies to implement global IT standards by locking in specific product configurations worldwide.

Device Guard (DG) and Credential Guard (CG) are the new security features that only available on Windows 10 Enterprise today. Device Guard is a combination of enterprise-related hardware and software security features. When you configure together, it locks a device down so that it can only run trusted applications. If it is not a trusted application, it cannot run. Credential Guard uses virtualization-based security to isolate secrets (credentials) so that only privileged system software can access them. Unauthorized access to these secrets can lead to credential theft attacks. Credential Guard prevents these attacks by protecting NTLM password hashes and Kerberos Ticket Granting Tickets.

NOTE:Processor numbers are not a measure of performance. Processor availability subject to change and may vary by region/country.
Table 1. Processor

The following table provides the various processor options supported for OptiPlex 5400 All-in-One.
Processor type Processor wattage Processor core count Processor thread count Processor speed Processor cache Integrated graphics

Intel Pentium Gold G7400

46 W

2

4

up to 3.70 GHz

6 MB

Intel UHD Graphics 710

Intel Pentium Gold G7400T

35 W

2

4

up to 3.10 GHz

6 MB

Intel UHD Graphics 710

12th Generation Intel Core i3-12100

60 W

4

8

3.30 GHz to 4.30 GHz

12 MB

Intel UHD Graphics 730

12th Generation Intel Core i3-12100T

35 W

4

8

2.20 GHz to 4.10 GHz

12 MB

Intel UHD Graphics 730

12th Generation Intel Core i3-12300

60 W

4

8

3.50 GHz to 4.40 GHz

12 MB

Intel UHD Graphics 730

12th Generation Intel Core i3-12300T

35 W

4

8

2.30 GHz to 4.20 GHz

12 MB

Intel UHD Graphics 730

12th Generation Intel Core i5-12400

65 W

6

12

2.50 GHz to 4.40 GHz

18 MB

Intel UHD Graphics 730

12th Generation Intel Core i5-12400T

35 W

6

12

1.80 GHz to 4.20 GHz

18 MB

Intel UHD Graphics 730

12th Generation Intel Core i5-12500

65 W

6

12

3 GHz to 4.60 GHz

18 MB

Intel UHD Graphics 770

12th Generation Intel Core i5-12500T

35 W

6

12

2 GHz to 4.40 GHz

18 MB

Intel UHD Graphics 770

12th Generation Intel Core i5-12600

65 W

6

12

3.30 GHz to 4.80 GHz

18 MB

Intel UHD Graphics 770

12th Generation Intel Core i5-12600T 35 W 6 12 2.10 GHz to 4.60 GHz 18 MB Intel UHD Graphics 770
12th Generation Intel Core i7-12700 65 W 12 20 2.10 GHz to 4.90 GHz 25 MB Intel UHD Graphics 770
12th Generation Intel Core i7-12700T 35 W 12 20 1.40 GHz to 4.60 GHz 25 MB Intel UHD Graphics 770

Chipset

The following table lists the details of the chipset supported by your OptiPlex 5400 All-in-One.

Table 1. Chipset

The following table provides the chipset specifications for OptiPlex 5400 All-in-One.
Description Values
Chipset

Intel Q670 PCH

Processor
  • Intel Pentium Gold
  • 12th Generation Intel Core i3/i5/i7
DRAM bus width
  • 64-bit (for single-channel)
  • 128-bit (for dual-channel)
Flash EPROM

32 MB

PCIe bus

Up to Gen 3.0

Non-volatile memory Yes
BIOS configuration Serial Peripheral Interface (SPI) 256 Mbit (32 MB) located at SPI_FLASH
Trusted Platform Module (TPM) 2.0 (Discrete TPM Enabled) 24 KB located at TPM 2.0 on chipset
Firmware-TPM (Discrete TPM disabled) By default the Platform Trust Technology feature is visible to the operating system.
NIC EEPROM LOM configuration contained within SPI flash ROM instead of LOM e-fuse

Operating system

Your OptiPlex 5400 All-in-One supports the following operating systems:

  • Windows 11 Home, 64-bit
  • Windows 11 Home National Academic, 64-bit
  • Windows 11 Pro, 64-bit
  • Windows 11 Pro National Academic, 64-bit
  • Windows 11 CMIT Government Edition, 64-bit (China only)
  • Windows 11 Downgrade (Windows 10 image)
  • Ubuntu Linux 20.04 LTS, 64-bit
  • Kylin Linux Desktop version 10.1 (China only)

For more information about Dell OS Recovery image, see How to Download and Use the Dell OS Recovery Image in Microsoft Windows, at Dell support site.

Commercial platform Windows 11 N-2 and 5-year operating system supportability:

All newly introduced 2019 and later commercial platforms (Latitude, OptiPlex, and Dell Precision) will qualify and ship with the most current factory installed Semi-Annual Channel Windows 11 version (N) and qualify (but not ship) the previous two versions (N-1, N-2). The OptiPlex 5400 All-in-One will RTS with Windows 11 version v20H2 at time of launch, and this version will determine the N-2 versions that are initially qualified for this platform.

For future versions of Windows 11, Dell continues to test the commercial platform with coming Windows 11 releases during device production and for five years post-production, including both fall and spring releases from Microsoft.

For additional information about N-2 and 5-year Windows operating system supportability, see the Dell Windows as a Service (WaaS), at Dell support site.

EOML 411

The OptiPlex 5400 All-in-One continues to test the coming Semi-Annual Channel Windows 11 version releases for five years post-production, including both fall and spring releases from Microsoft.

Memory

The following table lists the memory specifications of your OptiPlex 5400 All-in-One.

Table 1. Memory specifications

The following table provides the detailed memory specifications of OptiPlex 5400 All-in-One.
Description Values
Memory slots

Two-SoDIMM

Memory type

DDR4

Memory speed

3200 MHz

Maximum memory configuration

64 GB

Minimum memory configuration

4 GB

Memory size per slot

4 GB, 8 GB, 16 GB, 32 GB

Memory configurations supported
  • 4 GB, 1 x 4 GB, DDR4, 3200 MHz
  • 8 GB, 1 x 8 GB, DDR4, 3200 MHz
  • 16 GB, 1 x 16 GB, DDR4, 3200 MHz
  • 16 GB, 2 x 8 GB, DDR4, 3200 MHz, dual-channel
  • 32 GB, 1 x 32 GB, DDR4, 3200 MHz
  • 32 GB, 2 x 16 GB, DDR4, 3200 MHz, dual-channel
  • 64 GB, 2 x 32 GB, DDR4, 3200 MHz, dual-channel

Memory matrix

The following table lists the memory configurations supported on your OptiPlex 5400 All-in-One.

Table 1. Memory matrixThe following table provides the detailed memory configurations that are supported for your OptiPlex 5400 All-in-One.
Configuration Slot
SO-DIMM1 SO-DIMM2
4 GB DDR4 4 GB NA
8 GB DDR4 8 GB NA
16 GB DDR4 16 GB NA
16 GB DDR4 8 GB 8 GB
32 GB DDR4 32 GB NA
32 GB DDR4 16 GB 16 GB
64 GB DDR4 32 GB 32 GB

External ports

The following table lists the external ports of your OptiPlex 5400 All-in-One.

Table 1. External ports

The following table lists ports and connectors available on OptiPlex 5400 All-in-One.
Description Values
Network port

One RJ45 Ethernet port (rear)

USB ports
  • One USB 3.2 Gen 2x1 Type-C port (side)
  • One USB 3.2 Gen 1 port with PowerShare (side)
  • Two USB 3.2 Gen 2 ports (rear)
  • Two USB 3.2 Gen 1 ports with Smart Power On (rear)
Audio port
  • One universal audio port (side)
  • One Line-out audio port (rear)
Video port
  • One DisplayPort++ 1.4a/HDCP 2.3 port
  • One HDMI-IN—HDMI 1.4a port (with UMA configuration-65 W)
  • One HDMI-OUT—HDMI 2.0 port (with UMA configuration-65 W)
Media-card reader

One SD 4.0 card slot (side)

Power-adapter port

Not supported

Security-cable slot

One Kensington security-cable slot

Internal slots

The following table lists the internal slots of your OptiPlex 5400 All-in-One.

Table 1. Internal slotsThe following table lists the internal slots on your OptiPlex 5400 All-in-One.
Description Values
PCIe expansion card slots Not supported
mSATA Not supported
SATA One SATA slot for 2.5-inch hard drive
M.2
  • One M.2 2230 slot for Wi-Fi and Bluetooth card
  • One M.2 2230/2280 slot for SSD (35 W)
  • Two M.2 2230/2280 slot for SSD (65 W)
NOTE:To learn more about the features of different types of M.2 cards, see the knowledge base article 000144170 at www.dell.com/support.

Ethernet

The following table lists the wired Ethernet Local Area Network (LAN) specifications of your OptiPlex 5400 All-in-One.

Table 1. Ethernet specifications

The following table provides the Ethernet specifications of OptiPlex 5400 All-in-One.
Description Values
Model number

Intel i219-LM

Transfer rate

10/100/1000 Mbps

Wireless module

The following table lists the Wireless Local Area Network (WLAN) module specifications of your OptiPlex 5400 All-in-One.

Table 1. Wireless module specifications

The following table provides the wireless module specifications of OptiPlex 5400 All-in-One.
Description Option one Option two Option three
Model number

Intel AX201

Intel AX211

Realtek RTL8822CE

Transfer rate

Up to 2400 Mbps

Up to 2400 Mbps

Up to 867 Mbps

Frequency bands supported

2.4 GHz/5 GHz

2.4 GHz/5 GHz/6 GHz

2.4 GHz/5 GHz

Wireless standards
  • WiFi 802.11a/b/g
  • Wi-Fi 4 (WiFi 802.11n)
  • Wi-Fi 5 (WiFi 802.11ac)
  • Wi-Fi 6 (WiFi 802.11ax)
  • WiFi 802.11a/b/g
  • Wi-Fi 4 (WiFi 802.11n)
  • Wi-Fi 5 (WiFi 802.11ac)
  • Wi-Fi 6E (WiFi 802.11ax)
  • Wi-Fi 802.11a/b/g
  • Wi-Fi 4 (Wi-Fi 802.11n)
  • Wi-Fi 5 (Wi-Fi 802.11ac)
Encryption
  • 64-bit/128-bit WEP
  • AES-CCMP
  • TKIP
  • 64-bit/128-bit WEP
  • AES-CCMP
  • TKIP
  • 64-bit/128-bit WEP
  • AES-CCMP
  • TKIP
Bluetooth wireless card

Bluetooth 5.2

Bluetooth 5.2

Bluetooth 5.0

NOTE:The version of the Bluetooth wireless card may vary depending on the operating system that is installed on your computer.

Audio

The following table lists the audio specifications of your OptiPlex 5400 All-in-One.

Table 1. Audio specifications

The following table provides the detailed audio specifications of OptiPlex 5400 All-in-One.
Description Values
Audio controller

Realtek Codec ALC3289

Stereo conversion

Realtek Codec ALC3289 capability supporting 44.1 k/48 k/96 k/192 kHz sample rate DAC conversion

Internal audio interface

High definition audio interface

External audio interface

Universal audio jack

Number of speakers

Two (Stereo speakers with Waves MaxxAudio® Pro, 2 W x 2 = 4 W total)

Internal-speaker amplifier

Realtek Amplifier ALC1302

External volume controls

No hardware volume buttons

Speaker output:
Average speaker output

2 W

Peak speaker output

2.5 W

Subwoofer output

Not applicable

Microphone

Two—MEMS microphones

Storage

This section lists the storage options on your OptiPlex 5400 All-in-One.

Table 1. Storage matrix-35 W configurationThe following table provides the storage configurations that are supported for your OptiPlex 5400 All-in-One.
Storage Single M.2 socket 1st 2.5-inch hard drive
2.5-inch hard drive No Yes
M.2 SSD Boot Yes No
M.2 SDD Boot 2.5-inch hard drive Yes Yes
Table 2. Storage matrix—65 W configurationThe following table provides the storage configurations that are supported for your OptiPlex 5400 All-in-One.
Storage Single M.2 socket 2nd M.2 socket 1st 2.5-inch hard drive
2.5-inch hard drive No No Yes
M.2 SSD Boot Yes No No
M.2 SSD Boot Yes Yes No
M.2 SSD Boot 2.5-inch hard drive Yes No Yes
M.2 SSD Boot 2.5-inch hard drive Yes Yes Yes
M.2 SSD Boot M.2 SSD Boot Yes Yes Yes
Table 3. Storage specifications

The following table provides the different storage options available on OptiPlex 5400 All-in-One.
Storage type Interface type Capacity

2.5-inch, 5400 RPM, HDD

SATA AHCI, up to 6 Gbps

Up to 2 TB

2.5-inch, 7200 RPM, HDD

SATA AHCI, up to 6 Gbps

Up to 1 TB

2.5-inch, 7200 RPM, HDD, self-encrypting, Opal 2.0, FIPS

SATA AHCI, up to 6 Gbps

500 GB

M.2 2230, Class 35 SSD

PCIe NVMe Gen3 x4

Up to 1 TB

M.2 2230, Class 35 SSD, self-encrypting drive

PCIe NVMe Gen3 x4

256 GB

M.2 2280, Class 40 SSD

PCIe NVMe Gen3 x4

Up to 2 TB

M.2 2280, Class 40 SSD, self-encrypting drive

PCIe NVMe Gen3 x4

Up to 1 TB

Media-card reader

The following table lists the media cards supported by your OptiPlex 5400 All-in-One.

Table 1. Media-card reader specifications

The following table provides the media-card specifications of OptiPlex 5400 All-in-One.
Description Values
Media-card type

One Secure Digital (SD) 4.0 card

Media-cards supported
  • Secure Digital High Capacity (SDHC)
  • Secure Digital Extended Capacity (SDXC)
  • Secure Digital (SD) 4.0
  • SD UHS-I (UHS50)
NOTE:The maximum capacity supported by the media-card reader varies depending on the standard of the media card installed in your computer.

Camera

The following table lists the camera specifications of your OptiPlex 5400 All-in-One.

Table 1. Full HD RGB Infrared Webcam

The following table provides the detailed camera specifications of OptiPlex 5400 All-in-One.
Description Values
Number of cameras

One

Camera type

FHD RGB camera/Infrared camera

Camera location

Front pop-up camera

Camera sensor type

CMOS sensor technology

Focus detail
  • Fixed focus
  • Focus area—23 cm ~ Infinity
Camera resolution:
Still image

2.07 megapixels

Video

1920 x 1080 (FHD) at 30 fps

Infrared camera resolution:
Still image

0.30 megapixels

Video

640 x 480 (VGA) at 30 fps

Diagonal viewing angle:
Camera

77.50 degrees

Infrared camera

82.90 degrees

Table 2. Full HD RGB Webcam The following table provides the detailed specification of full HD RGB webcam.
Description Values
Number of cameras One
Camera type FHD RGB camera
Camera location Front pop-up camera
Camera sensor type CMOS sensor technology
Camera resolution:
Still image 2.07 megapixels
Video 1920 x 1080 (FHD) at 30 fps
Diagonal viewing angle: 77.40 degrees

Power ratings

The following table lists the power rating specifications of OptiPlex 5400 All-in-One.

Table 1. Power ratings

The following table provides the power rating specifications of OptiPlex 5400 All-in-One.
Description Option one Option two
Type 155 W Bronze 160 W Bronze
Input voltage 90 VAC to 264 VAC 90 VAC to 264 VAC
Input frequency 47 Hz to 63 Hz 47 Hz to 63 Hz
Input current (maximum) 3.6 A 3.6 A
Output current (continuous)
  • +19.5 VA/7.5 A
  • +19.5 VB/7.0 A
Standby mode:
  • +19.5 VA/0.5 A
  • +19.5 VB/1.75 A
  • +19.5 VA/7.5 A
  • +19.5 VB/7.0 A
Standby mode:
  • +19.5 VA/0.5 A
  • +19.5 VB/1.75 A
Rated output voltage
  • +19.5 VA
  • +19.5 VB
  • +19.5 VA
  • +19.5 VB
Temperature range
Operating 5°C to 42°C (41°F to 107°F) 5°C to 42°C (41°F to 107°F)
Storage -40°C to 70°C (-40°F to 158°F) -40°C to 70°C (-40°F to 158°F)

Power supply connector

The following table lists the Power supply connector specifications of your OptiPlex 5400 All-in-One.

Table 1. Power supply connector The following table lists the Power supply connector specifications of your OptiPlex 5400 All-in-One.
155 W (80 PLUS Bronze)
  • One 16 pin connector for system board
  • One 2 pin connector for LED
160 W (80 PLUS Bronze)
  • One 16 pin connector for system board
  • One 2 pin connector for LED

Display

The following table lists the display specifications of your OptiPlex 5400 All-in-One.

Table 1. Display specifications

The following table provides the detailed display specifications of OptiPlex 5400 All-in-One.
Description Option one (non-touch display) Option two (touch-display)
Display type

Full High Definition (FHD)

Full High Definition (FHD)

Display-panel technology

Wide Viewing Angle (WVA)

Wide Viewing Angle (WVA)

Display-panel dimensions (active area):
Height

296.46 mm (11.67 in.)

296.46 mm (11.67 in.)

Width

527.04 mm (20.75 in.)

527.04 mm (20.75 in.)

Diagonal

604.70 mm (23.81 in.)

604.70 mm (23.81 in.)

Display-panel native resolution

1920 x 1080

1920 x 1080

Luminance
  • 200 nits (minimum)
  • 250 nits (typical)
  • 200 nits (minimum)
  • 250 nits (typical)
Megapixels

2.07

2.07

Color gamut

99% sRGB (typical)

72% NTSC typical

Pixels Per Inch (PPI)

92

92

Contrast ratio
  • 700:1 (minimum)
  • 1000:1 (typical)
  • 700:1 (minimum)
  • 1000:1 (typical)
Response time (max.)
  • 25 ms (maximum)
  • 14 ms (typical)
  • 25 ms (maximum)
  • 14 ms (typical)
Refresh rate

60 Hz

60 Hz

Horizontal view angle
  • 170 degrees (minimum)
  • 178 degrees (typical)
  • 170 degrees (minimum)
  • 178 degrees (typical)
Vertical view angle
  • 170 degrees (minimum)
  • 178 degrees (typical)
  • 170 degrees (minimum)
  • 178 degrees (typical)
Pixel pitch

0.2745 x 0.2745 mm

0.2745 x 0.2745 mm

Power consumption (maximum)

12.70 W

13.48 W

Anti-glare vs glossy finish

Anti-glare

Anti-glare

Adaptive sync Not applicable Not applicable
Stylus support Not applicable Capacitive touch
Multi-touch feature supported Not applicable 10-points multi-touch
Display surface Anti-glare treatment of the front polarizer (Haze 25%, 3H) Anti-glare treatment of the front polarizer (Haze 25%, 3H)

GPU—Integrated

The following table lists the specifications of the integrated Graphics Processing Unit (GPU) supported by your OptiPlex 5400 All-in-One.

Table 1. GPU—Integrated

The following table provides the detailed integrated graphics specifications of OptiPlex 5400 All-in-One.
Controller External display support Memory size Processor

Intel UHD Graphics 710

  • One DisplayPort++ 1.4a/HDCP 2.3 port
  • One HDMI-OUT—HDMI 2.0 port (with UMA configuration-65 W)

Shared system memory

12th Generation Intel Pentium Gold G7400 and G7400T processor

Intel UHD Graphics 730

  • One DisplayPort++ 1.4a/HDCP 2.3 port
  • One HDMI-OUT—HDMI 2.0 port (with UMA configuration-65 W)

Shared system memory

12th Generation Intel Core i3-12100, i3-12100T, i3-12300, i3-12300T, i5-12400, and i5-12400T processors

Intel UHD Graphics 770

  • One DisplayPort++ 1.4a/HDCP 2.3 port
  • One HDMI-OUT—HDMI 2.0 port (with UMA configuration-65 W)

Shared system memory

12th Generation Intel Core i5-12500, i5-12500T, i5-12600, i5-12600T, i7-12700, and i7-12700T processors

Multiple display support matrix

The following table lists the multiple display support matrix for your OptiPlex 5400 All-in-One.

Table 1. Multiple display support matrixThe following table provides the multiple display support matrix for your OptiPlex 5400 All-in-One.
Description Option 1 Option 2 Option 3
Integrated Graphics Card Intel UHD Graphics 710 Intel UHD Graphics 730 Intel UHD Graphics 770
Optional Module NA NA NA
Supported 4K Displays
  • On board integrated DP1.4 HBR3 (5120 x 3200 @ 60 Hz)
  • On board integrated HDMI 2.0 (4096 x 2160 @ 60 Hz)—with 65 W UMA configuration
  • On board integrated DP1.4 HBR3 (5120 x 3200 @ 60 Hz)
  • On board integrated HDMI 2.0 (4096 x 2160 @ 60 Hz)—with 65 W UMA configuration
  • On board integrated DP1.4 HBR3 (5120 x 3200 @ 60 Hz)
  • On board integrated HDMI 2.0 (4096 x 2160 @ 60 Hz)—with 65 W UMA configuration
Supported 5K Displays On board integrated DP1.4 HBR3 (5120 x 3200 @ 60 Hz) On board integrated DP1.4 HBR3 (5120 x 3200 @ 60 Hz) On board integrated DP1.4 HBR3 (5120 x 3200 @ 60 Hz)

Hardware security

The following table lists the hardware security of your OptiPlex 5400 All-in-One.

Table 1. Hardware security The following table provides the hardware security details on your OptiPlex 5400 All-in-One.
Hardware security
Dell Lockable port cover (optional)
Chassis lock slot support
Noble Custom AIO Plate Lock (optional)
Supply chain tamper alerts
Chassis intrusion switch
Trusted Platform Module (Discrete TPM Enabled)
SafeBIOS including Dell Off-host BIOS Verification
BIOS Resilience
BIOS Recovery, and additional BIOS Controls
SafeID including Trusted Platform Module (TPM) 2.0
Self-Encrypting Drives (SED)
Smart card keyboard (FIPS)
D-Pedigree (Secure Supply Chain Functionality)
Dell wired mouse with fingerprinter reader

Environmental

The following table lists the environmental specifications of your OptiPlex 5400 All-in-One.

Table 1. Environmental The following table lists the environmental specifications of your OptiPlex 5400 All-in-One.
Feature Values
Recyclable packaging Yes
BFR/PVC—free chassis No
Vertical orientation packaging support Yes
Multi-Pack packaging No
Energy-Efficient Power Supply Standard
ENV0424 compliant Yes
NOTE: Wood‐based fiber packaging contains a minimum of 35% recycled content by total weight of wood‐based fiber. Packaging that contains without wood‐based fiber can be claimed as Not Applicable. The anticipated required criteria for EPEAT 2018.

Regulatory compliance

The following table lists the regulatory compliance of your OptiPlex 5400 All-in-One.

Table 1. Regulatory complianceThe following table lists the regulatory compliance of your OptiPlex 5400 All-in-One.
Regulatory compliance
Product Safety, EMC and Environmental Datasheets
Dell Regulatory Compliance Home page
Dell and the Environment

Operating and storage environment

This table lists the operating and storage specifications of your OptiPlex 5400 All-in-One.

Airborne contaminant level: G1 as defined by ISA-S71.04-1985

Table 1. Computer environment

The following table lists the operating and storage environment conditions of OptiPlex 5400 All-in-One.
Description Operating Storage
Temperature range

10°C to 35°C (50°F to 95°F)

-40°C to 65°C (-40°F to 149°F)

Relative humidity (maximum)

20% to 80% (non-condensing)

5% to 95% (non-condensing)

Vibration (maximum)*

0.26 GRMS

1.37 GRMS

Shock (maximum)

110 G†

160 G†

Altitude range

-15.2 m to 3048 m (-49.87 ft to 10000 ft)

-15.2 m to 10668 m (-49.87 ft to 35000 ft)

CAUTION:Operating and storage temperature ranges may differ among components, so operating or storing the device outside these ranges may impact the performance of specific components.

* Measured using a random vibration spectrum that simulates user environment.

† Measured using a 2 ms half-sine pulse.