Processor
Global Standard Products (GSP) are a subset of Dell’s relationship products that are managed for availability and synchronized transitions on a worldwide basis. They ensure the same platform is available for purchase globally. This allows customers to reduce the number of configurations managed on a worldwide basis, thereby reducing their costs. They also enable companies to implement global IT standards by locking in specific product configurations worldwide. The following GSP processors identified below will be made available to Dell customers.
Device Guard (DG) and Credential Guard (CG) are the security features available on Windows 10 Enterprise. Device Guard is a combination of enterprise-related hardware and software security features, when configured together, will lock a device down so that it can only run trusted applications. Credential Guard uses virtualization-based security to isolate secrets (credentials) so that only privileged system software can access them. Unauthorized access to these secrets can lead to credential theft attacks. Credential Guard prevents these attacks by protecting NTLM password hashes and Kerberos Ticket Granting Tickets.
- NOTE: Processor numbers are not a measure of performance. Processor availability is subject to change and may vary by region/country.
|
Type |
|---|
| Intel Core i3 - 8100 (4 Cores/6MB/4T/3.6GHz/65W) |
| Intel Core i3 - 8300 (4 Cores/8MB/4T/3.7GHz/65W) |
| Intel Core i5 - 8400 (6 Cores/9MB/6T/up to 4.0GHz/65W) |
| Intel Core i5 - 8500 (6 Cores/9MB/6T/up to 4.1GHz/65W) |
| Intel Core i5 - 8600 (6 Cores/9MB/6T/up to 4.3GHz/65W) |
| Intel Core i7 - 8700 (6 Cores/12MB/12T/up to 4.6GHz/65W) |
Memory
|
Minimum memory configuration |
4 GB (1 x 4GB module) |
|
Maximum memory configuration |
32 GB |
|
Number of slots |
2 SODIMM |
|
Maximum memory supported per slot |
16 GB |
|
Memory options |
|
|
Type |
DDR4 SDRAM Non-ECC memory |
|
Speed |
|
- NOTE: Intel Optane Memory does not replace DDR memory or add to RAM capacity.
Storage
|
Primary/Boot drive |
Form Factor |
Capacity |
|---|---|---|
|
One Solid-State Drive (SSD) |
M.2 2280 |
|
|
One 2.5 inch Hard-Disk Drive (HDD) |
Approximately (2.760 x 3.959 x 0.374 inches) |
Up to 2 TB |
|
One 2.5 inch Solid-State Hybrid Drive (SSHD) |
Approximately (2.760 x 3.959 x 0.276 inches) |
Up to 1 TB |
| Primary/Boot drive | Form Factor |
|---|---|
| 1 x M.2 Drive | NA |
| 1 x M.2 Drive | 1 x 2.5 inch Drive |
| 1 x 2.5 inch Drive | NA |
| 1 x 2.5 inch HDD with M.2 Optane | NA |
- NOTE: Supports RAID 0 and 1 with M.2 and 2.5" HDD.
For optimal performance when configuring drives as a RAID volume, Dell recommends drive models that are identical.
RAID 0 (Striped, Performance) volumes benefit from higher performance when drives are matched because the data is split across multiple drives: any IO operations with block sizes larger than the stripe size will split the IO and become constrained by the slowest of the drives. For RAID 0 IO operations where block sizes are smaller than the stripe size, whichever drive the IO operation targets will determine the performance, which increases variability and results in inconsistent latencies. This variability is particularly pronounced for write operations and it can be problematic for applications that are latency sensitive. One such example of this is any application that performs thousands of random writes per second in very small block sizes.
RAID 1 (Mirrored, Data Protection) volumes benefit from higher performance when drives are matched because the data is mirror across multiple drives: all IO operations must be performed identically to both drives, thus variations in drive performance when the models are different results in the IO operations completing only as fast as the slowest drive. While this does not suffer the variable latency issue in small random IO operations as with RAID 0 across heterogeneous drives, the impact is nonetheless large because the higher performing drive becomes limited in all IO types. One of the worst examples of constrained performance here is when using unbuffered IO. To ensure writes are fully committed to non-volatile regions of the RAID volume, unbuffered IO bypasses cache (for example by using the Force Unit Access bit in the NVMe protocol) and the IO operation will not complete until all the drives in the RAID volume have completed the request to commit the data. This kind of IO operation completely negates any advantage of a higher performing drive in the volume.
Care must be taken to match not only the drive vendor, capacity, and class, but also the specific model. Drives from the same vendor, with the same capacity, and even within the same class, can have very different performance characteristics for certain types of IO operations. Thus, matching by model ensures that the RAID volumes is comprised of an homogeneous array of drives that will deliver all the benefits of a RAID volume without incurring the additional penalties when one or more drives in the volume are lower performing.
When RAID is used for two non-identical drives (i.e. M.2 + 2.5 inch), performance will be at the speed of the slower drive in the array.
Audio
|
Integrated Realtek ALC3289 High Definition Audio |
|
| High Definition Stereo support | Yes |
| Number of channels | 2 |
| Number of Bits / Audio resolution | 16, 20, and 24-bit resolution |
| Sampling rate (recording/playback) | Support 44.1K/48K/96K/192 kHz sample rates |
| Signal to Noise Ratio | 98 dB DAC outputs, 92 dB for ADC inputs |
| Analog Audio | Yes |
| Waves MaxxAudio Pro | Yes |
| Audio Jack Impedance | |
| Microphone | 40K ohm~60K ohm |
| Line-In | N/A |
| Line-Out | 100~150 ohm |
| Headphone | 1~4 ohm |
| Internal Speaker Power Rating |
3 Watt (average) / 4 Watt (peak) |
Video controller
|
Controller |
Type |
Graphics memory type |
|---|---|---|
|
Intel UHD Graphics 630 |
UMA |
Integrated |
|
NVIDIA GeForce GTX 1050, 4GB |
Discrete |
GDDR5 |
| DisplayPort 1.2 | HDMI 1.4 | HDMI 2.0b | |
|---|---|---|---|
| Max resolution - Single display | 4096x2160 |
|
|
| Max resolution - Dual MST |
|
N/A | N/A |
| Max Resolution - Dual MST | 2560x1080 | N/A | N/A |
| All resolutions shown at 24bpp and unless specifically stated are @60Hz refresh | |||
Web camera
| Maximum Resolution | 2.0 MP |
| Camera type |
|
| Video Resolution |
|
| Diagonal Viewing Angle |
|
| Power Saving Support | Suspend, Hibernation |
| Automatic Image Control |
Automatic Exposure Control (AE) Automatic White Balance Control (AWB) Automatic Gain Control (AGC) |
| Webcam Mechanical Privacy | Pop up camera |
Communications - Integrated
|
Network adapter |
Integrated Intel i219-LM 10/100/1000 Mb/s Ethernet (RJ-45 ) with Intel Remote Wake UP and PXE |
External ports and connectors
|
USB 3.1 Type A Gen1(Side/Rear/Internal) |
1/4/0
|
|
USB 3.1 Type C Gen 2 (Side/Rear/Internal) |
1/0/0 One USB 3.1 Gen 2 Type-C port (side) |
|
Network Connector (RJ-45) |
1 Rear |
|
HDMI 1.4 Out |
1 Rear (Integrated graphics configurations) |
|
HDMI-In (Optional) |
1 Rear |
|
HDMI 2.0 Out |
1 Rear (Discrete graphics configurations) |
|
DisplayPort 1.2 |
1 Rear |
|
Universal Audio Jack |
1 Side |
|
Line-Out for headphones or speakers |
1 Rear |
Display
|
Type |
|
|
Screen size (Diagonal) |
27 inch |
|
Screen technology |
IPS |
|
Display |
WLED |
|
Native resolution |
|
|
High definition |
|
|
Luminance |
|
|
Active area dimensions |
|
|
Height |
|
|
Width |
|
|
Megapixels |
|
|
Pixels Per Inch (PPI) |
|
|
Pixel pitch |
|
|
Color depth |
|
|
Contrast ratio (min) |
|
|
Contrast ratio (typical) |
|
|
Response time (max) |
25 min-sec |
|
Refresh rate |
60 Hhz |
|
Horizontal viewing angle |
178 degrees |
|
Vertical viewing angle |
178 degrees |
Power
| Power Supply Wattage | 240W EPA Platinum |
| AC input Voltage Range | 90 – 264 Vac |
| AC input current (low AC range/high AC range) | 3.6A/1.8A |
| AC input Frequency | 47HZ - 63HZ |
| AC holdup time (80% load) | 16 mini sec |
| Average Efficiency | 90-92-89% @ 20-50-100% load |
| Typical Efficiency (Active PFC) | N/A |
| DC parameters | |
| +12.0 v output | NA |
| +19.5 v output | 19.5VA - 8.5A and 19.5VB - 10.5A |
| +19.5 v output auxiliary output | 19.5VA - 0.5A and 19.5VB - 1.75A
Standby mode 19.5VA - 0.5A and 19.5VB - 1.75a |
| Max total power | 240 W |
| Max combined 12.0 v power (note: only if more than one 12 v rail) | N/A |
| BTUs/h (based on PSU max wattage) | 819 BTU |
| Power Supply Fan | N/A |
| Compliance | |
| Erp Lot6 Tier 2 0.5watt requirement | Yes |
| Climate Savers / 80Plus Compliant | Yes |
| Energy Star 6.1 Qualified | Yes |
| FEMP Standby Power Compliant | Yes |
| Power | Graphics | Heat dissipation | Voltage |
|---|---|---|---|
| 240W | Discrete gfx | 240 * 3.4125 = 819 BTU/hr | 100 to 240 VAC , 50 to 60 Hz , 3.6A/1.8 A |
| 3.0v CMOS battery (Type and estimated battery life) | ||||
|---|---|---|---|---|
| Brand | Type | Voltage | Composition | Life |
| VIC-DAWN | CR-2032 | 3V | Lithium | Continuous Discharge Under 30 kΩ Load till 2.0V End-Voltage at the temperature of 23°C±3°C. The batteries should be submitted to 150 temperature cycles from 60°C~-10°C, and then be stored for more than 24hours at 23°C±3°C |
| JHIH HONG | CR-2032 | 3V | Lithium |
Continuous Discharge Under 15 kΩ Load to 2.5V End-Voltage. 20°C±2°C: 940Hrs or longer; 910Hrs or longer after 12 months. |
| MITSUBISHI | CR-2032 | 3V | Lithium |
Continuous Discharge Under 15 kΩ Load to 2.0V End-Voltage. 20°C±2°C: 1000Hrs or longer; 970Hrs or longer after 12 months. 0°C±2°C: 910Hrs or longer; 890Hrs or longer after 12 months. |
Physical system dimensions
- NOTE: System weight and shipping weight is based on a typical configuration and may vary based on PC configuration. A typical configuration includes: integrated graphics and one hard drive.
|
Non-touch chassis weight without stand (pounds / kilograms) |
18.54 / 8.41 |
|
Touch chassis weight without stand (pounds / kilograms) |
19.03 / 8.63 |
| Non-touch chassis dimensions (system without stand): | |
|
Height (inches / centimeters) |
15.31 / 38.90 |
|
Width (inches / centimeters) |
24.17 / 61.40 |
|
Depth (inches / centimeters) |
|
|
Touch chassis dimensions (system without stand): |
|
|
Height (inches / centimeters) |
15.31 / 38.9 |
|
Width (inches / centimeters) |
24.17 / 61.4 |
|
Depth (inches / centimeters) |
|
|
Height adjustable stand dimensions |
|
|
Width x Depth (inches / centimeters) |
11.30 x 10.03 / 28.70 x 25.48 |
|
Weight (pounds / kilograms) |
7.10 / 3.22 |
|
Articulating stand dimensions |
|
|
Height (inches / centimeters) |
23.35 cm |
|
Width x Depth (inches / centimeters) |
10.69 x 10.68 / 27.15 x 27.13 |
|
Weight (pounds / kilograms) |
9.79 / 4.44 |
| Packaging parameters with height adjustable stand | |
|
Height (inches / centimeters) |
21.57 / 54.80 |
|
Width (inches / centimeters) |
36.14 / 91.80 |
|
Depth (inches / centimeters) |
8.50 / 21.60 |
|
Shipping weight (pounds / kilograms - includes packaging materials) |
35.27 / 16.0 |
|
Packaging parameters with articulating stand |
|
|
Height (inches / centimeters) |
21.77 x 55.30 |
|
Width (inches / centimeters) |
28.50 / 72.40 |
|
Depth (inches / centimeters) |
10.20 / 25.90 |
|
Shipping weight (pounds / kilograms - includes packaging materials) |
37.48 / 17.00 |
Environmental
- NOTE: For more details on Dell Environmental features, please to go to Environmental Attributes section. See your specific region for availability.
| Recyclable packaging | Yes |
| BFR/PVC—free chassis | No |
| Vertical orientation packaging support | Yes |
| MultiPack packaging |
Select countries |
| Energy Efficient Power Supply | Yes |