Dell PowerEdge M1000e Enclosure: руководство по обслуживанию

Technical Specifications

Table 1. Enclosure SpecificationsEnclosure Specifications:
Physical
Height	44.0 cm (17.3 inch)
Width	44.7 cm (17.6 inch)
Depth	75.5 cm (29.7 inch)
Weight (maximum)	200.5 kg (442 lb)
Weight (empty)	44.6 kg (98.1 lb)

Table 2. Power Supply ModulePower Supply Module
Power Supply Module
AC/DC power supply (per power supply module) (2700 W)
Wattage	2700 W
Connector	IEC C20
Heat dissipation	1205 BTU/hr (maximum)
Maximum inrush current	Under typical line conditions and over the entire system ambient operating range, the inrush current may reach 55 A per power supply for 10 ms or less.
AC/DC power supply (per power supply module) (3000 W)
Wattage	3000 W
Connector	IEC 320
Heat dissipation NOTE: Heat dissipation is calculated using the power supply wattage rating.	1200 BTU/hr (maximum)
Maximum inrush current	Under typical line conditions and over the entire system ambient operating range, the inrush current may reach 55 A per power supply for 10 ms or less.
System voltage requirements	16 A, 200 V AC to 240 V AC, 50 Hz/60 Hz (3000 W power supply)
NOTE: This system is also designed to be connected to IT power systems with a phase to phase voltage not exceeding 230 V.	16 A, 100 V AC to 240 V AC, 50 Hz/60 Hz (2700 W power supply)
DC/DC power supply (per power supply)
Wattage	2700 W
Connector	Molex # 394260002 at PSU end, mating connector Molex # 39422-0012
Heat dissipation	1205 BTU/hr (maximum)
Maximum inrush current	Under typical input voltage conditions and over the entire system ambient operating range, the inrush current may reach 120 A per power supply for 10 ms or less.
System voltage requirements	75 A, 48 V DC to 60 V DC

Table 3. Optional Avocent iKVM Module Optional Avocent iKVM Module:
Optional Avocent iKVM Module
Externally accessible connectors
USB	Two 4-pin, USB 2.0-compliant connectors for keyboard and mouse support
ACI port	RJ-45
Video	15-pin VGA

Table 4. Chassis Management Controller ModuleChassis Management Controller Module:
Chassis Management Controller Module
Externally accessible connectors
Remote management	Two dedicated 10/100/1000 Mb RJ-45 (for integrated Ethernet remote access controller). Gb port connects to the external management network. STK port allows CMCs in adjacent enclosures to be daisy chained.
Serial	9-pin, DTE, 16550-compatible
Video	15-pin VGA
Battery	CR 2032 3.0-V Lithium ion coin cell

Table 5. Enclosure Control PanelEnclosure Control Panel:
Enclosure Control Panel
Externally accessible connectors
USB	Two 4-pin, USB 2.0-compliant connectors for keyboard and mouse support
Video	15-pin VGA
LCD panel features	Four cursor control keys, one select key, LCD screen

Table 6. I/O Module SpecificationsI/O Module Specifications:
Cisco Nexus B22 Fabric Extender Module
Externally accessible connectors	Sixteen 10 Gb (internal) Ethernet ports and Eight 10 Gigabit Ethernet SFP+ ports that support 10Gbase-SR, 10Gbase-LR, and 10Gbase-ER fabric connections.
Brocade M6505 16 Gbps FC SAN I/O Module
Externally accessible connectors	Eight physical FC8 ports that support 4/8/16 Gbps fibre channel connections
Serial Port	RJ-45
Dell PowerEdge M I/O Aggregator Switch Module
Externally accessible connectors
Serial	4-pin, USB 2.0 type A connector. Must use provided USB type A to DB9 adapter to connect to terminal.
Optional Modules	Two fixed 40 GbE ports that operate in 4x10 GbE mode.
Dell Force10 MXL 10/40 GbE Switch Module
Externally accessible connectors
Serial	4-pin, USB 2.0 type A connector. Must use provided USB type A to DB9 adapter to connect to terminal.
Optional Modules	Two optional bays. Each bay supports an Uplink module with four 40 GbE optical SFP+ connectors, or 10GBASE-T module using RJ-45 connectors.
PowerConnect M8024 10 Gb Ethernet Switch Module
Externally accessible connectors
Serial	4-pin, USB 2.0 type A connector. Must use provided USB type A to DB9 adapter to connect to terminal.
Optional Modules	Two optional bays. Each bay supports an Uplink module with four 10 Gb optical SFP+ connectors, or three 10 Gb CX4 uplinks. A stacking module is not available.
PowerConnect M6220 Ethernet Switch Module
Externally accessible connectors
10/100/1000 Mbps Ethernet	Four autonegotiating RJ-45 ports
Serial	4-pin, USB 2.0 type A connector. Must use provided USB type A to DB9 adapter to connect to terminal.
Optional Modules	Two option bays. Each bay supports a module with two 24 Gb stacking ports, two 10 Gb CX4 copper uplinks, or two 10 Gb optical XFPs.
Brocade FC8 Fibre Channel Switch Module
Externally accessible connectors	Eight physical FC8 ports (four enabled by default, upgradeable to eight) that support 2/4/8 Gbps fibre channel connections
Serial Port	RJ-45

Brocade FC4 Fibre Channel Switch Module
Externally accessible connectors
Fibre channel	Eight physical FC4 ports (four enabled by default, upgradeable to eight) that support 1/2/4 Gbps FC connections
Serial Port	RJ-45
Mellanox M4001F/M4001Q Infiniband Switch I/O Module
Externally accessible connectors
Infiniband ports	Sixteen QSFP connectors
Mellanox Infiniband Switch Module
Externally accessible connectors
Infiniband ports	Eight Infiniband uplink ports
Mellanox Infiniband Switch Module
Externally accessible connectors
Infiniband ports	Eight Infiniband uplink ports
Gb Ethernet Pass-Through Module
Externally accessible connectors
Ethernet	Sixteen RJ-45 ports. Pass-through ports support 10/100/1000 Mbps connections.
Fibre Channel Pass-Through Module
Externally accessible connectors
Fibre channel transceiver	Sixteen external SFP ports that support 1/2/4 Gbps FC connections

Table 7. Environmental SpecificationsEnvironmental Specifications:
Environmental
NOTE: For additional information about environmental measurements for specific system configurations, see dell.com/environmental_datasheets.
	Standard Operating Temperature	Continuous operation: 10 °C to 35 °C at 10% to 80% relative humidity (RH), with 26 °C max dew point. De-rate maximum allowable dry bulb temperature at 1 °C per 300 m above 900 m (1 °F per 550 ft).
	Expanded Operating Temperature
		NOTE: When operating in the expanded temperature range, system performance may be impacted. NOTE: When operating in the expanded temperature range, ambient temperature warnings may be reported on the LCD and in the System Event Log.
	< 10% of annual operating hours	5 °C to 40 °C at 5% to 85% RH with 26 °C dew point. NOTE: Outside the standard operating temperature (10 °C to 35 °C), the system can operate down to 5 °C or up to 40 °C for a maximum of 10% of its annual operating hours. For temperatures between 35 °C and 40 °C, de-rate maximum allowable dry bulb temperature by 1 °C per 175 m above 950 m (1 °F per 319 ft).
	< 1% of annual operating hours	–5 °C to 45 °C at 5% to 90% RH with 26 °C dew point. NOTE: Outside the standard operating temperature (10 °C to 35 °C), the system can operate down to –5 °C or up to 45 °C for a maximum of 1% of its annual operating hours. For temperatures between 40 °C and 45 °C, de-rate maximum allowable dry bulb temperature by 1 °C per 125 m above 950 m (1 °F per 228 ft).
	Expanded Operating Temperature Restrictions	Install blades that fulfill the requirements for expanded operating temperature range. NOTE: For more information on the blade-specific restrictions for the expanded operating temperature range, see the technical specifications in the blade's Owner's Manual at dell.com/support/manuals. 2700 W power supplies are supported as per the power supply rated capacity. 3000 W power supplies are supported with a capacity of 2800 W per power supply. Install fans of the following ratings: 12 V, 5.0 A 12 V, 6.30 A Only the following I/O modules are supported: Brocade M5424 FC8 I/O module Dell M8428-k 10 Gb converged network switch Cisco 1 GE 3130X-s switch Mellanox M3601Q DDR/QDR switch Dell PowerConnect M8024-k switch Dell PowerConnect M6220 Ethernet switch I/O module Dell PowerConnect M8024 10 Gb Ethernet switch I/O module
	Storage Temperature	–40 °C to 65 °C (–40 °F to 149 °F) with a maximum temperature gradation of 20 °C per hour.