System information
| Description | Values |
|---|---|
|
Chipset |
Intel C246 chipset |
|
DRAM bus width |
64-bit |
|
FLASH EPROM |
SPI 128 Mbits |
|
PCIe bus |
100 MHz |
|
External bus frequency |
DMI 3.0-8GT/s |
Processor
|
Type |
UMA Graphics |
|---|---|
| lntel Core Processor i3 - 9300 (4 Cores/8 MB/4T/up to 4.3GHz/65W) | Intel UHD Graphics 630 |
| lntel Core Processor i5 - 9500 (6 Cores/9 MB/6T/up to 4.4GHz/65W) | Intel UHD Graphics 630 |
| Intel Core Processor i5 - 9600 (6 Cores/9 MB/6T/up to 4.6GHz/65W) | Intel UHD Graphics 630 |
| Intel Core Processor i7 - 9700 (8 Cores/12 MB/8T/up to 4.7GHz/65W) | Intel UHD Graphics 630 |
| Intel Core Processor i9 - 9900 (8 Cores/16 MB/16T/up to 5.0GHz/65W) | Intel UHD Graphics 630 |
| Intel Pentium Gold G5420 (2 Cores, 4 MB Cache, 3.8GHz) | Intel UHD Graphics 610 |
| Intel Xeon E Processor E-2224 (4 Core, 8 MB Cache, 3.4GHz, 4.6GHz Turbo) | NA |
| Intel Xeon E Processor E-2224G (4 Core, 8 MB Cache, 3.5GHz, 4.7GHz Turbo) | Intel UHD Graphics P630 |
| Intel Xeon E Processor E-2236 (6 Core, 12 MB Cache, 3.4GHz, 4.8GHz Turbo) | NA |
|
Type |
UMA Graphics |
|---|---|
| Intel Xeon E Processor E-2174G (4 Core HT, 8 MB Cache, 3.8GHz, 4.7GHz) | Intel UHD Graphics 630 |
| Intel Core Processor i7-8700 (6 Core, 12 MB Cache, 3.20GHz, 4.6GHz ) | Intel UHD Graphics 630 |
Memory
| Description | Values |
|---|---|
|
Minimum memory configuration |
4 GB |
|
Maximum memory configuration |
64 GB |
|
Number of slots |
4 UDIMM |
|
Maximum memory supported per slot |
16 GB |
|
Memory options |
|
|
Type |
ECC/Non-ECC memory |
|
Speed |
2666 MHz NOTE:Pentium and i3 run at 2400 MHz
|
Storage
|
Type |
Form factor |
Interface |
Security option |
Capacity |
|---|---|---|---|---|
|
One NVMe Solid-State Drives(SSD) |
M.2 2280 |
PCIe 4, Up to 32 Gbps |
SED |
Up to 1 TB |
| One Solid-State Optane memory drive (SSD) |
M.2 2230 |
PCIe, Up to 32 Gbps |
32 GB | |
|
Two 2.5 inch Hard-Disk Drive (HDD) |
Approximately (2.760 x 3.959 x 0.374 inches) |
SATA AHCI, Up to 6 Gbps |
SED, Opal, FIPS |
Up to 4 TB |
|
One 3.5 inch Hard-Disk Drive (HDD) |
Approximately (2.760 x 3.959 x 0.276 inches) |
SATA AHCI, Up to 6 Gbps |
Up to 4 TB |
| Primary/Boot drive | Form Factor |
|---|---|
| 1 x M.2 Drive | NA |
| 1 x M.2 Drive | 1 x 2.5 inch Drive |
| 1 x 2.5 inch Drive | NA |
| 1 x 2.5 inch HDD | NA |
| 1 x Slim Optical Disk Drive | CAC/PIV - Common Access Card/Personal Identification Verification - CAC/PIV |
For optimal performance when configuring drives as a RAID volume, Dell recommends drive models that are identical.
RAID 0 (Striped, Performance) volumes benefit from higher performance when drives are matched because the data is split across multiple drives: any IO operations with block sizes larger than the stripe size will split the IO and become constrained by the slowest of the drives. For RAID 0 IO operations where block sizes are smaller than the stripe size, whichever drive the IO operation targets will determine the performance, which increases variability and results in inconsistent latencies. This variability is particularly pronounced for write operations and it can be problematic for applications that are latency sensitive. One such example of this is any application that performs thousands of random writes per second in very small block sizes.
RAID 1 (Mirrored, Data Protection) volumes benefit from higher performance when drives are matched because the data is mirror across multiple drives: all IO operations must be performed identically to both drives, thus variations in drive performance when the models are different results in the IO operations completing only as fast as the slowest drive. While this does not suffer the variable latency issue in small random IO operations as with RAID 0 across heterogeneous drives, the impact is nonetheless large because the higher performing drive becomes limited in all IO types. One of the worst examples of constrained performance here is when using unbuffered IO. To ensure writes are fully committed to non-volatile regions of the RAID volume, unbuffered IO bypasses cache (for example by using the Force Unit Access bit in the NVMe protocol) and the IO operation will not complete until all the drives in the RAID volume have completed the request to commit the data. This kind of IO operation completely negates any advantage of a higher performing drive in the volume.
Care must be taken to match not only the drive vendor, capacity, and class, but also the specific model. Drives from the same vendor, with the same capacity, and even within the same class, can have very different performance characteristics for certain types of IO operations. Thus, matching by model ensures that the RAID volumes is comprised of an homogeneous array of drives that will deliver all the benefits of a RAID volume without incurring the additional penalties when one or more drives in the volume are lower performing.
When RAID is used for two non-identical drives (i.e. M.2 + 2.5 inch), performance will be at the speed of the slower drive in the array.
Media card-reader
| Description | Values |
|---|---|
|
Type |
One SD-card slot |
|
Supported cards |
|
System board connectors
| Description | Values |
|---|---|
|
M.2 Connectors |
One (2280 and 2230) |
|
Serial ATA (SATA) connector |
Three Gen3 full height slot |
|
PCIe X16 slot |
One half height slot |
|
PCIe x4 slot (Open ended) |
One half height slot |
Audio
| Description | Values |
|---|---|
|
Controller |
Realtek ALC3234 |
|
Type |
Four-channel high-definition audio |
|
Speakers |
Two (Directional speakers) |
|
Interface |
|
|
Internal speaker amplifier |
2W (RMS) per channel |
Video card
Controller | Type | CPU Dependency | Graphics memory type | Capacity | External display support | Maximum resolution |
|---|---|---|---|---|---|---|
Intel UHD Graphics 630 | UMA |
| Integrated | Shared system memory | DisplayPort/HDMI 1.4 | 4096 x 2304 |
| NVIDIA Quadro P1000 | Discrete | N\A | GDDR5 | 4 GB | mDP/DisplayPort | 5120 x 2880 |
| NVIDIA Quadro P620 | Discrete | N\A | GDDR5 | 2 GB | mDP/DisplayPort | 5120 x 2880 |
| NVIDIA Quadro P400 | Discrete | N\A | GDDR5 | 2 GB | mDP/DisplayPort | 5120 x 2880 |
| AMD Radeon Pro WX4100 | Discrete | N\A | GDDR5 | 4 GB | mDP | 5120 x 2880 |
| AMD Radeon Pro WX3100 | Discrete | N\A | GDDR5 | 4 GB | mDP/DisplayPort | 5120 x 2880 |
| AMD Radeon Pro WX2100 | Discrete | N\A | GDDR5 | 2 GB | mDP/DisplayPort | 5120 x 2880 |
Communication
| Description | Values |
|---|---|
|
Network adapter |
Integrated Intel i219-LM 10/100/1000 Mbps Ethernet (RJ45 ) with Intel Remote Wake UP, PXE and Jumbo frames support |
Wireless
| Values |
|---|
|
Intel Dual Band Wireless-AC 9560 802.11AC 2x2 Wi-Fi + BT 5 LE M.2 Wireless Card |
|
Qualcomm QCA61x4A 802.11ac MU-MIMO Dual Band (2x2) Wi-Fi + Bluetooth 4.2 LE M.2 Wireless Card |
Ports and connectors
| Description | Values |
|---|---|
|
Memory card reader |
SD card reader |
|
Smart card reader |
Optional |
|
USB |
|
|
Security |
Noble wedge lock slot/Padlock Ring |
|
Audio |
|
|
Video |
|
|
Network adapter |
One RJ45 connector |
|
Serial port |
One serial port (optional) |
|
PS/2 |
|
Power supply
| Description | Values |
|---|---|
| Input voltage |
100–240 VAC, 50–60 Hz |
|
Wattage |
|
Security
|
Feature |
Description |
|---|---|
|
Trusted Platform Module (TPM) 2.0 |
Integrated on the system board |
|
Firmware TPM |
Optional |
|
Windows Hello Support |
Optional via security input device |
|
Cable cover |
Optional |
|
Chassis intrusion switch |
Standard |
|
Dell Smartcard Keyboard |
Optional |
|
Chassis lock slot and loop support |
Standard |
Security Software
|
Features |
Description |
|---|---|
|
Dell Endpoint Security Suite Enterprise |
Optional |
|
Dell Data Guardian |
Optional |
|
Dell Encryption (Enterprise or Personal) |
Optional |
|
Dell Threat Defense |
Optional |
|
RSA SecurID Access |
Optional |
|
RSA NetWitness Endpoint |
Optional |
|
MozyPro or MozyEnterprise |
Optional |
|
VMware Airwatch/WorkspaceONE |
Optional |
|
Absolute Data & Device Security |
Optional |
Operating system
| Description | Values |
|---|---|
|
Operating systems supported |
|
Physical system dimensions
| Description | Values |
|---|---|
|
Chassis volume (liters) |
7.8 |
|
Chassis weight (pounds / kilograms) |
11.57 / 5.26 |
| Description | Values |
|---|---|
|
Height (inches / centimeters) |
11.42 / 29 |
|
Width (inches / centimeters) |
3.65 / 9.26 |
|
Depth (inches / centimeters) |
11.50 / 29.2 |
|
Shipping weight (pounds / kilograms – includes packaging materials) |
15.09 / 6.86 |
| Description | Values |
|---|---|
|
Height (inches / centimeters) |
10.38 / 26.4 |
|
Width (inches / centimeters) |
19.2 / 48.7 |
|
Depth (inches / centimeters) |
15.5 / 39.4 |
Environmental
| Description | Values |
|---|---|
|
Energy efficient power supply |
Internal |
|
80 plus bronze certification |
200 W EPA bronze (not available in North America or Brazil) |
|
80 plus platinum certification |
200 W (Only available in North America and Brazil) and 260 W EPA platinum |
|
Recyclable packaging |
Yes |
|
MultiPack packaging |
Optional, US only |
|
Energy Star 6.1 (or later) Compliant (Windows and Ubuntu) |
Yes |
Computer environment
Airborne contaminant level: G1 as defined by ISA-S71.04-1985
| Description | Operating | Storage |
|---|---|---|
| Temperature range | 10 °C—35 °C (50 °F—95 °F) | -40 °C—65 °C (-40 °F—149 °F) |
| Relative humidity (maximum) | 20% to 80% (non-condensing) | 5% to 95% (non-condensing) |
| Vibration (maximum)* | 0.52 GRMS random at 5 Hz to 350 Hz | 2.0 GRMS random at 5 Hz to 350 Hz |
| Shock (maximum) | Bottom half-sine pulse with a change in velocity of 50.8 cm/sec (20 in./sec) | 105 G half-sine pulse with a change in velocity of 133 cm/sec (52.5 in./sec) |
| Altitude (maximum) | 3048 m (10000 ft) | 10668 m (35000 ft) |
* Measured using a random vibration spectrum that simulates user environment.
† Measured using a 2 ms half-sine pulse when the hard drive is in use.




























