Dell Pro Max Micro FCM2250: руководство по обслуживанию

Dimensions and weight

The following table lists the height, width, depth, and weight of your Dell Pro Max Micro FCM2250.

Table 1. Dimensions and weight
The following table provides the detailed display specifications of Dell Pro Max Micro FCM2250.
Description		Values
Height		206.00 mm (8.11 in.)
Width		79.30 mm (3.12 in.)
Depth		178 mm (7.00 in.)
Weight NOTE:The weight of your computer depends on the configuration that is ordered and manufacturing variability.		Maximum: 2.54 kg (5.59 lb) Minimum: 1.89 kg (4.16 lb)

Processor

The following table lists the details of the processors that are supported on your Dell Pro Max Micro FCM2250.

Table 1. Processor The following table lists the details of the processors that are supported in your Dell Pro Max Micro FCM2250.
Description	Option one	Option two	Option three	Option four
Type	Intel Core Ultra 9 285 vPro	Intel Core Ultra 7 265 vPro	Intel Core Ultra 5 245 vPro	Intel Core Ultra 5 235 vPro
Wattage	65 W	65 W	65 W	65 W
Core count	24	20	14	14
Thread count	24	20	14	14
Speed	2.50 GHz to 5.60 GHz	2.40 GHz to 5.30 GHz	3.50 GHz to 5.10 GHz	3.40 GHz to 5 GHz
Cache	36 MB	30 MB	24 MB	24 MB
Integrated graphics	Intel Graphics	Intel Graphics	Intel Graphics	Intel Graphics

Chipset

The following table lists the details of the chipset supported by your Dell Pro Max Micro FCM2250.

Table 1. Chipset
The following table provides the chipset specifications for Dell Pro Max Micro FCM2250.
Description	Values
Chipset	W880
Processor	Intel Core Ultra 9/7/5 vPro processors
DRAM bus width	64-bit
Flash EPROM	32 MB + 32 MB
PCIe bus	Up to Gen4
Non-volatile memory	Yes
BIOS configuration Serial Peripheral Interface (SPI)	256 Mbit (32 MB) located at SPI_FLASH
Trusted Platform Module (TPM) 2.0 (Discrete TPM Enabled)	24 KB located at TPM 2.0 on chipset
Firmware-TPM (Discrete TPM disabled)	By default the Platform Trust Technology feature is visible to the operating system.
NIC EEPROM	LOM configuration contained within SPI flash ROM instead of LOM e-fuse

Operating system

Your Dell Pro Max Micro FCM2250 supports the following operating systems:

Windows 11 Home, 64-bit
Windows 11 Pro, 64-bit
Windows 11 Pro National Education, 64-bit
Windows 11 Pro for Workstations
Ubuntu Linux 24.04 LTS, 64-bit

Memory

The following table lists the memory specifications that are supported by your Dell Pro Max Micro FCM2250.

Table 1. Memory specificationsThe following table lists the memory specifications of your computer.
Description	Values
Memory slots	Two-SODIMM slots
Memory type	DDR5
Memory speed	5600 MT/s 6400 MT/s
Maximum memory configuration	64 GB
Minimum memory configuration	8 GB
Memory size per slot	8 GB, 16 GB, 32 GB
Memory configurations supported	8 GB: 1 x 8 GB, DDR5, 5600 MT/s, Non-ECC, single-channel 16 GB: 1 x 16 GB, DDR5, 5600 MT/s, Non-ECC, single-channel 16 GB: 2 x 8 GB, DDR5, 5600 MT/s, Non-ECC, dual-channel 32 GB: 1 x 32 GB, DDR5, 5600 MT/s, Non-ECC, single-channel 32 GB: 2 x 16 GB, DDR5, 5600 MT/s, Non-ECC, dual-channel 64 GB: 2 x 32 GB, DDR5, 5600 MT/s, Non-ECC, dual-channel 16 GB: 1 x 16 GB, DDR5, 5600 MT/s, ECC, single-channel 16 GB: 2 x 8 GB, DDR5, 5600 MT/s, ECC, dual-channel 32 GB: 1 x 32 GB, DDR5, 5600 MT/s, ECC, single-channel 32 GB: 2 x 16 GB, DDR5, 5600 MT/s, ECC, dual-channel 64 GB: 2 x 32 GB, DDR5, 5600 MT/s, ECC, dual-channel 8 GB: 1 x 8 GB, DDR5, 6400 MT/s, Non-ECC, single-channel 16 GB: 1 x 16 GB, DDR5, 6400 MT/s, Non-ECC, single-channel 16 GB: 2 x 8 GB, DDR5, 6400 MT/s, Non-ECC, dual-channel 32 GB: 1 x 32 GB, DDR5, 6400 MT/s, Non-ECC, single-channel 32 GB: 2 x 16 GB, DDR5, 6400 MT/s, Non-ECC, dual-channel 64 GB: 2 x 32 GB, DDR5, 6400 MT/s, Non-ECC, dual-channel

Memory matrix

The following table lists the memory configurations supported on your Dell Pro Max Micro FCM2250.

Table 1. Memory matrixThe following table provides the detailed memory configurations that are supported for your Dell Pro Max Micro FCM2250.
	Memory matrix for Non-ECC		Memory matrix for ECC
Configuration	SODIMM1	SODIMM2	SODIMM1	SODIMM2
8 GB DDR5	8 GB	N/A	8 GB	N/A
16 GB DDR5	8 GB	8 GB	8 GB	8 GB
16 GB DDR5	16 GB	N/A	16 GB	N/A
32 GB DDR5	16 GB	16 GB	16 GB	16 GB
32 GB DDR5	32 GB	N/A	32 GB	N/A
64 GB DDR5	32 GB	32 GB	32 GB	32 GB

External ports and slots

The following table lists the external ports and slots of your Dell Pro Max Micro FCM2250.

Table 1. External ports and slots
The following table lists ports and connectors available on Dell Pro Max Micro FCM2250.
Description	Values
Network port	One RJ45 ethernet port (1 Gbps)
USB ports	Front: One USB 3.2 Gen 2x2 (20 Gbps) Type-C port One USB 3.2 Gen 2 (10 Gbps) with PowerShare port One USB 3.2 Gen 2 (10 Gbps) port Rear: One USB 3.2 Gen 2 (10 Gbps) Type-C port Two USB 3.2 Gen 2 (10 Gbps) ports One USB 3.2 Gen 1 (5 Gbps) with Smart Power On port One USB 3.2 Gen 1 (5 Gbps) ports One serial port (optional) One serial and PS2 port using fan out cable (optional)
Audio port	One headset (headphone and microphone combo) port
Video port(s)	Three DisplayPort 1.4a (HBR3 support) ports
Power-adapter port	280 W AC adapter, 7.40 mm barrel 180 W AC adapter, 7.40 mm barrel
Security-cable slot	One Kensington lock slot One padlock ring
Optional port	One optional module port which can be configured with one of the following options: One VGA port One HDMI 2.1 FRL port One DisplayPort 2.1 (UHBR20) One Serial/PS2 port One USB Type C with DisplayPort Alt Mode Two USB Type-A ports One Thunderbolt 4 port + One USB Type-C port One 5G Optical Fiber port One 5GbE LAN NIC port

Internal slots

The following table lists the internal slots of your Dell Pro Max Micro FCM2250.

Table 1. Internal slotsThe following table lists the internal slots on your Dell Pro Max Micro FCM2250.
Description	Values
Expansion slots	Two half-height Gen4 PCIe x8 slots (x8 and x1 electrically)
M.2	One M.2 2230 slot for Wi-Fi and Bluetooth combo card One M.2 2280 Gen4 PCIe NVMe single-sided SSD NOTE:To learn more about the features of different types of M.2 cards, search in the Knowledge Base Resource at Dell Support Site.

Ethernet

The following table lists the wired ethernet Local Area Network (LAN) specifications of your Dell Pro Max Micro FCM2250.

Table 1. Ethernet specifications
The following table provides the specifications of Ethernet that is supported by your Dell Pro Max Micro FCM2250.
Description	Values
Model	Intel ethernet connection I219-LM
Transfer rate	10/100/1000 Mbps

Wireless module

The following table lists the Wireless Local Area Network (WLAN) modules that are supported on your Dell Pro Max Micro FCM2250.

Table 1. Wireless module specifications
The following table provides the wireless module specifications of Dell Pro Max Micro FCM2250.
Description	Option one	Option two
Model number	Intel BE200	Qualcomm FastConnect 7800 DBS
Transfer rate	5760 Mbps	5760 Mbps
Frequency bands supported	2.40 GHz/5 GHz/6 GHz	2.40 GHz/5 GHz/6 GHz
Wireless standards	Wi-Fi 802.11a/b/g Wi-Fi 4 (Wi-Fi 802.11n) Wi-Fi 5 (Wi-Fi 802.11ac) Wi-Fi 6E (Wi-Fi 802.11ax) Wi-Fi 7 (Wi-Fi 802.11be)	Wi-Fi 802.11a/b/g Wi-Fi 4 (Wi-Fi 802.11n) Wi-Fi 5 (Wi-Fi 802.11ac) Wi-Fi 6E (Wi-Fi 802.11ax) Wi-Fi 7 (Wi-Fi 802.11be)
Encryption	64-bit/128-bit WEP AES-CCMP TKIP	64-bit/128-bit WEP AES-CCMP TKIP
Bluetooth wireless card NOTE:The functionality of the Bluetooth wireless card may vary based on the operating system.	Bluetooth 5.4 wireless card	Bluetooth 5.4 wireless card

Audio

The following table lists the audio specifications of your Dell Pro Max Micro FCM2250.

Table 1. Audio specifications
The following table provides the detailed audio specifications of Dell Pro Max Micro FCM2250.
Description	Values
Audio type	4 Channel High Definition Audio
Audio controller	Realtek ALC3204 Codec
Internal audio interface	Intel HDA (high-definition audio)
External audio interface	One headset (headphone and microphone combo) port
Speakers	Waves MaxxAudio 14.0, Internal speakers

Storage

This section lists the storage options on your Dell Pro Max Micro FCM2250.

Table 1. Storage matrixThe following table provides the storage configurations that are supported for your Dell Pro Max Micro FCM2250.
Storage type	M.2 PCIe SSD-0	M.2 PCIe SSD-1	RAID support
M.2 Solid-State Drive (Boot/Primary)	2230	None	None
M.2 Solid-State Drive (Boot/Primary)	2280	None	None
M.2 Solid-State Drive (Boot/Primary) + M.2 SSD (Secondary)	2230	2230	RAID 0 or RAID 1
M.2 Solid-State Drive (Boot/Primary) + M.2 SSD (Secondary)	2280	2280	RAID 0 or RAID 1 (same capacity only)
M.2 Solid-State Drive (Boot/Primary) + M.2 SSD (Secondary)	2230	2280	None
M.2 Solid-State Drive (Boot/Primary) + M.2 SSD (Secondary)	2230	2280	None

NOTE:For more information about RAID, see Redundant Array of Independent Disks (RAID).

Table 2. Storage specifications
The following table provides the different storage options available on Dell Pro Max Micro FCM2250.
Storage type	Interface type	Capacity
M.2 2230 solid-state drive	TLC Gen4 PCIe NVMe	256 GB
M.2 2230 solid-state drive	TLC Gen4 PCIe NVMe	512 GB
M.2 2280 solid-state drive	TLC Gen4 PCIe NVMe, Self-Encrypting Opal 2.0	512 GB
M.2 2280 solid-state drive	TLC Gen4 PCIe NVMe, Self-Encrypting Opal 2.0	1 TB
M.2 2280 solid-state drive	TLC Gen4 PCIe NVMe, Self-Encrypting Opal 2.0	2 TB
M.2 2280 solid-state drive	TLC Gen4 PCIe NVMe, Self-Encrypting Opal 2.0	4 TB
NOTE:Contact your Independent Software Vendor (ISV) for assistance with enabling multiple SED SSD encryption.

Redundant Array of Independent Disks (RAID)

For optimal performance when configuring drives as a RAID volume, Dell Technologies recommends using identical drive models.

RAID 0 (Striped, Performance) volumes benefit from higher performance when drives are matched because the data is split across multiple drives: However, any I/O operations with block sizes larger than the stripe size will be constrained by the slowest drive in the array. For RAID 0 I/O operations where block sizes are smaller than the stripe size, whichever drive the I/O operation targets, determines the performance, which increases variability and results in inconsistent latencies. This variability is particularly pronounced for write operations, and it can be problematic for applications that are latency sensitive. One such example of this is any application that performs thousands of random writes per second in very small block sizes.

RAID 1 (Mirrored, Data Protection) volumes benefit from higher performance when drives are matched because the data is mirrored across multiple drives all I/O operations must be performed identically to both drives, thus variations in drive performance when the models are different result in the I/O operations completing only as fast as the slowest drive. While this does not suffer from the variable latency issue in small random I/O operations as with RAID 0 across heterogeneous drives, the impact is nonetheless large because the higher performing drive becomes limited in all I/O types. One of the worst examples of constrained performance here is when using unbuffered I/O. To ensure that that writes are fully committed to nonvolatile regions of the RAID volume, unbuffered I/O bypasses cache (for example by using the Force Unit Access bit in the NVMe protocol) and the I/O operation will not complete until all the drives in the RAID volume have completed the request to commit the data. This kind of I/O operation completely negates any advantage of a higher performing drive in the volume.

Care must be taken to match not only the drive vendor, capacity, and class, but also the specific model. Drives from the same vendor, with the same capacity, and even within the same class, can have different performance characteristics for certain types of I/O operations. Thus, matching by model ensures that the RAID volume consists of a homogeneous array of drives that deliver all the benefits of a RAID volume without incurring the additional penalties when one or more drives in the volume are lower performing.

RAID support for this model is shown in Storage matrix.

Power adapter

The following table lists the power adapter specifications of your Dell Pro Max Micro FCM2250.

Table 1. Power adapter specifications
The following table provides the detailed power adapter specifications of Dell Pro Max Micro FCM2250.
Description	Option one	Option two
Type	180 W AC adapter, 7.4mm barrel	280 W AC adapter, 7.4mm barrel
Connector dimensions:
External diameter	7.40 mm (0.29 in.)	7.40 mm (0.29 in.)
Internal diameter	5.10 mm (0.20 in.)	5.10 mm (0.20 in.)
Input voltage	100 VAC x 240 VAC	100 VAC x 240 VAC
Input frequency	50 Hz x 60 Hz	50 Hz x 60 Hz
Input current (maximum)	2.34 A	4 A
Output current (continuous)	9.23 A	14.36 A
Rated output voltage	19.50 VDC	19.50 VDC
Temperature range:
Operating	0°C to 40°C (32°F to 104°F)	0°C to 40°C (32°F to 104°F)
Storage	-40°C to 70°C (-40°F to 158°F)	-40°C to 70°C (-40°F to 158°F)
CAUTION:Operating and storage temperature ranges may differ among components, so operating or storing the device outside these ranges may impact the performance of specific components.

GPU—Integrated

The following table lists the specifications of the integrated Graphics Processing Unit (GPU) supported by your Dell Pro Max Micro FCM2250.

Table 1. GPU—Integrated
The following table provides the detailed integrated graphics specifications of Dell Pro Max Micro FCM2250.
Controller	Memory size	Processor
Intel Graphics	Shared system memory	Intel Core Ultra 9/7/5

Multiple display support matrix

The following table lists the multiple display support matrix for your Dell Pro Max Micro FCM2250.

Table 1. Multiple display support matrixThe following table provides the multiple display support matrix for your Dell Pro Max Micro FCM2250.
Description	Option
Integrated Graphics Card	Intel Graphics
Optional Module	HDMI 2.1 FRL - 5120 x 3200 at 60 Hz DisplayPort 2.1 (UHBR20) - Up to 7680 x 4320 at 60 Hz VGA - Up to 1920 x 1200 at 60 Hz USB Type-C with DisplayPort Alt Mode - Up to 5120 x 3200 at 60 Hz
Supported 4K Displays	Onboard DisplayPort 1.4a (HBR3) Optional module HDMI 2.1 Optional module DisplayPort 2.1 Optional module USB Type-C with DisplayPort Alt Mode
Supported 5K Displays	Optional module DisplayPort 2.1 Optional module USB Type-C with DisplayPort Alt Mode Optional module HDMI 2.1

GPU—Discrete

The following table lists the specifications of the discrete Graphics Processing Unit (GPU) supported by your Dell Pro Max Micro FCM2250.

Table 1. GPU—Discrete
The following table provides the detailed discrete graphics specifications of Dell Pro Max Micro FCM2250.
Controller	Memory size	Memory type
NVIDIA RTX A400	4 GB	GDDR6
NVIDIA RTX A1000	8 GB	GDDR6
NVIDIA RTX 2000 Ada Generation	16 GB	GDDR6
NVIDIA RTX 4000 SFF Ada Generation	20 GB	GDDR6

Video port resolution

The following table lists the video port resolution for your Dell Pro Max Micro FCM2250.

Table 1. Video port resolutionThe following table provides the video port resolution for your Dell Pro Max Micro FCM2250.
Graphics card	Video ports	Maximum supported resolution
NVIDIA RTX A400	Four mini-DisplayPort 1.4a connectors	Up to 7680 x 4320 at 24 bbp at 120 Hz NOTE: Requires two DisplayPort 1.4a and DSC. DisplayPort 1.2 Certified, DisplayPort 1.3 and 1.4 ready.
NVIDIA RTX A1000	Four mini-DisplayPort 1.4a connectors	Up to 7680 x 4320 at 24 bbp at 120 Hz NOTE:. Requires two DisplayPort 1.4a and DSC. DisplayPort 1.2 Certified, DisplayPort 1.3 and 1.4 ready.
NVIDIA RTX 2000 Ada Generation	Four mini-DisplayPort 1.4a connectors	Up to 7680 x 4320 at 24 bbp at 120 Hz NOTE: Requires two DisplayPort 1.4a and DSC. DisplayPort 1.2 Certified, DisplayPort 1.3 and 1.4 ready.
NVIDIA RTX 4000 SFF Ada Generation	Four mini-DisplayPort 1.4a connectors	Up to 7680 x 4320 at 24 bbp at 120 Hz NOTE: Requires two DisplayPort 1.4a and DSC. DisplayPort 1.2 Certified, DisplayPort 1.3 and 1.4 ready.

Hardware security

The following table lists the hardware security of your Dell Pro Max Micro FCM2250.

Table 1. Hardware security The following table provides the hardware security details on your Dell Pro Max Micro FCM2250.
Hardware security
Kensington security-cable slot
Padlock loop
Chassis intrusion switch
Chassis lock slot support
Lockable cable covers
Supply chain tamper alerts
SafeID including Trusted Platform Module (TPM) 2.0
Smart card keyboard (FIPS)
Microsoft 10 Device Guard and Credential Guard (Enterprise SKU)
Microsoft Windows BitLocker
Local hard drive data wipe through BIOS (Secure Erase)
Self-encrypting storage drives (Opal, FIPS)
Trusted Platform Module TPM 2.0
China TPM
Intel Secure Boot
Intel Authenticate
SafeBIOS: includes Dell Off-host BIOS
Verification, BIOS Resilience, BIOS Recovery, and additional BIOS Controls

Environmental

The following table lists the environmental specifications of your Dell Pro Max Micro FCM2250.

Table 1. Environmental The following table lists the environmental specifications of your Dell Pro Max Micro FCM2250.
Feature	Values
Recyclable packaging	Yes
BFR/PVC—free chassis	No
Vertical orientation packaging support	No
Multi-Pack packaging	Yes
Energy-Efficient Power Supply	Standard
ENV0424 compliant	Yes

Regulatory compliance

The following table lists the regulatory compliance of your Dell Pro Max Micro FCM2250.

Table 1. Regulatory complianceThe following table lists the regulatory compliance of your Dell Pro Max Micro FCM2250.
Regulatory compliance
Product Safety, EMC and Environmental Datasheets
Dell Regulatory Compliance Home Page
Responsible Business Alliance policy

Operating and storage environment

This table lists the operating and storage specifications of your Dell Pro Max Micro FCM2250.

Airborne contaminant level: G1 as defined by ISA-S71.04-1985

Table 1. Computer environment
The following table lists the operating and storage environment conditions of Dell Pro Max Micro FCM2250.
Description	Operating	Storage
Temperature range	0°C to 35°C (32°F to 95°F)	-40°C to 65°C (-40°F to 149°F)
Relative humidity (maximum)	20% to 80% (non-condensing)	0% to 95% (non-condensing)
Vibration (maximum)^*	0.52 GRMS	2.0 GRMS
Shock (maximum)	40 G†, 2.5 ms	105 G†, 2.5 ms
Altitude range	-15.2 m to 3048 m (4.64 ft to 5518.4 ft)	-15.2 m to 10668 m (4.64 ft to 19234.4 ft)
CAUTION:Operating and storage temperature ranges may differ among components, so operating or storing the device outside these ranges may impact the performance of specific components.

^{* Measured using a random vibration spectrum that simulates the user environment.}

^{† Measured using a 2 ms half-sine pulse.}

Dell support policy

For information about Dell support policy, search Dell Support Site.

Dell Optimizer

This section details the Dell Optimizer specifications of your Dell Pro Max Micro FCM2250.

Dell Optimizer is an AI-based software application that allows you to customize your computer settings for power and more. Learn more: Optimizer at Dell Site

For Dell Pro Max Micro FCM2250 with Dell Optimizer, you can:

Tune the performance, power consumption, cooling, and fan noise with selectable thermal modes.
Download and redeem the apps that are purchased with your computer.

For more information about configuring and using these features, see Dell Optimizer User Guide.